Search results

The purpose of the paper is the identification of the main factors affecting the cost of urban air mobility (UAM) based on results of ASSURED-UAM project. These factors can be found among such cost areas as investments (infrastructure, aircraft), operational, energy, end of life, delay and environmental. Once determined, they can be of great value for all UAM stakeholders, including manufacturers, urban planners and air service providers.

The obtained results were based on the outcomes of ASSURED-UAM project. Having the information about the magnitude of each cost category, we were able to identify the most costly factors of UAM. As a result, it was possible to suggest feasible cost reduction means.

For each cost category, there is the possibility to lower its value among the total cost of UAM. Each cost category has its own cost reduction means. It is vital however that the obtained results depend strongly on the assumptions made at the beginning of cost calculations.

The value of this paper is the identification of key UAM costs reduction means which may be found beneficial for all UAM stakeholders involved in the development of UAM infrastructure and services.

This research aims to measure the public sector comparator (PSC) to reach public–private partnership (PPP) projects' negotiable price range for water and sewage companies in Iran. PSC measurement drives the public sector to make valid decisions about costs.

Around 170 risks were primarily determined through studying numerous articles. Then, risk effects were specified by distributing questionnaires in two steps. The questionnaires are distributed among experts on PPP-related projects and the Monte Carlo simulation method is used for confidence factors of 70, 80 and 90%. PSC is measured based on these results to study cases of Sirjan’s sewerage and sewage purification systems.

11 risks were identified as the main risks that are effective on PSC, and project implementation costs were specified based on the modeling. The corruption of the private and public sectors was identified as the most effective risk in this research. It can affect a project’s cost up to 158% in the construction period and up to 134% in the operation period. Based on the obtained results, 63% of this risk’s cost goes to the public sector.

The originality of this research is the PSC measurement method and appointing the risk share of each private and public sector. The results of this research can be applied to all the infrastructure and PPP projects in Iran and other developing countries as a way for employers to estimate accurate negotiable price ranges.

Drawing on the resource dependence theory (RDT), this paper investigates ownership composition, export intensity, and industry class as moderating factors to investigate the role of imported raw materials in performance of inward foreign direct investment (IFDI) in Ethiopia.

The hypotheses were tested using secondary data obtained from the 2016 Central Statistical Agency (CSA) on Large- and Medium-Scale Manufacturing and Electricity Industries Survey. The data included basic quantitative information on the country's manufacturing industry. The data items for the 2016 manufacturing and electricity industries surveyed are the numbers of proprietors or establishments involved in various sectors. The report did not record small firms that employed fewer than 10 people and did not use power-driven machinery. Two-Stage least squares (2SLS) regression analysis was performed to test the proposed hypotheses.

The results of this study indicate that three moderators (ownership composition, export intensity, and industry classification) interact with the hypothetical relationships between imported raw materials and performance. These findings enrich the knowledge of IFDI firms' operations in Ethiopia and in other least-developed countries (LDCs). The findings could provide information for IFDI firms that are looking to invest in LDCs.

Like all social science research, this study has some limitations. First, the research was conducted with the data found in the Report on Large- and Medium-Scale Manufacturing and Electricity Industries Survey In 2016. This was the first year of the second five-year Growth and Transformation Plan (GTP II), a national development plan for the 2016–2020 period. Continual research on IFDI in Ethiopia in the following years will be needed to get a full picture of the effects of the determinants on IFDIs.

To IFDI investors, the result of this thesis demonstrates several alternatives to overcoming hurdles in manufacturing operation. The results find that J.V. firms make better use of imported raw materials than W.O. subsidiaries in order to achieve better performance. Concerning the choice between focusing on export or domestic markets, the study suggests that domestic market—oriented companies require less imported raw materials to achieve better performance. Concerning the comparative advantage on different industries, this study found the performance of firms in Industry 12 depended on imported raw materials. These findings highlight the challenges and opportunities for potential foreign investors. Ownership composition, market factors, and industry factors should be well considered in making investment decisions.

This is one of few studies on IFDI in Ethiopia, the most populous LDC. Ownership composition, export intensity, and industry class are used as moderating variables to investigate the difference between imported raw materials and the level of expatriate deployment to IFDI performance. For IFDI investors, the results of this study demonstrate several alternatives to overcoming hurdles in manufacturing operation.

The paper aims to provide a decision-support model to ensure a proper use of the limited resources, financial and not, for the enhancement of the cultural heritage and comprehensive development of small towns from sustainable perspective.

The assessment model is set up using a multi-criteria method that combines elements of linear planning with a performance indicators system that may represent the complexity of the territory’s cultural identity as a result of existing cultural-historical assets.

The model reliability is tested in a case study in a Municipality in southern Italy. The case study’s findings highlight the advantages for the public/private operators, who can consciously choose which preservation and restoration projects to fund while taking into account the effects those decisions will have on the economic, social and environmental context of reference.

Due to the suggested operational approach and the selection of variables for accounting economic, social and environmental impacts by the renewal project, the research findings may not be generalizable. Therefore, it is recommended that researchers look into the suggested theories in more detail.

The study offers implications for designing a user-friendly tool to help decision-making processes from a private–public viewpoint in a reasonable allocation of financial resources among investments for cultural property asset enhancement.

The suggested operational approach provides a reliable information apparatus to depict the decision-making process under small-town development in accordance with sustainability dimensions.

Upon completion of this study, students will be able to define, explain and describe sustainability and its application in the business context; learn and demonstrate their understanding of current practices, processes and operations in companies that are aligned to business sustainability by identifying such in the case study to enable them to provide relevant examples; discuss and describe sustainable operations and practices across different industries; identify sustainable themes in manufacturing sectors and other related industries; and identify sustainable strategies for production and manufacturing processes.

This case study focused on Gunung Raja Paksi (GRP), a steel manufacturing company in Indonesia, with a portfolio in steel trading, cement plants and carbon markets. The case study covered the COVID-19 crisis period, especially the year 2020, which disrupted the normal operations of businesses and subjected the community to economic challenges. The emergence of GRP’s prominence in sustainable business attributed to the initiatives advanced by Kimin Tanoto, the chief executive officer (CEO) and chairperson of the Indonesia Iron and Steel Association (IISIA). Kimin Tanoto assumed leadership of GRP, a family-owned business, in 2018, despite being the second son. At the time of Kimin’s induction into the board of commissioners, two main challenges – the impacts of the COVID-19 pandemic, which disrupted the supply chains, and the company culture that resisted sustainable business approaches – acted as detriments to profit-making. Sustainable efforts, however, contributed to noticeable success during and after the COVID-19 crisis.

The case is suitable for instructions in undergraduate courses in Bachelor of Engineering (BEng) in Sustainable Resources, Engineering and Management, Bachelor in Sustainable Environmental Management, Bachelor of Culture and Arts in Smart and Sustainable Design, Bachelor in Sustainable Solutions and Bachelor of Science (BSc) in Sustainable Use of Natural Resources, and other instructions on sustainable practices.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The European Union’s Digital Markets Act (DMA) calls for far-reaching changes to the way economic activity will occur in EU digital markets. Before its remedies are imposed, it is critical to assess their impacts on individual markets, the digital sector, and the overall European economy. The European Commission (EC) released an Impact Assessment in support of the DMA that purports to evaluate it using cost/benefit analysis.

An economic evaluation of the DMA should consider its full impacts on dynamic competition. The Impact Assessment neither assesses the DMA's impact on dynamic competition in the digital economy nor evaluates the impacts of specific DMA prohibitions and obligations. Instead, it considers benefits in general and largely ignores costs. We study its benefit assessments and find they are based on highly inappropriate methodologies and assumptions. A cost/benefit study using inappropriate methodologies and largely ignoring costs cannot provide a sound policy assessment.

Instead of promoting dynamic competition between platforms, the DMA will likely reinforce existing market structures, ossify market boundaries, and stunt European innovation. The DMA is likely to chill R&D by encouraging free riding on the investments of others, which discourages making those investments. Avoiding harm to innovation is critical because innovation delivers large, positive spillover benefits, driving increases in productivity, employment, wages, and prosperity.

The DMA prioritizes static over dynamic competition, with the potential to harm the European economy. Given this, the Impact Assessment does not demonstrate that the DMA will be beneficial overall, and its implementation must be carefully tailored to alleviate or lessen its potential to harm Europe’s economic performance.

This article analyzes the moderating role of investment opportunities, business risk and agency costs in shaping the nexus between excess cash and corporate performance.

This research uses dynamic regression models (two-step system generalized method of moments) to analyze the data related to 200 Turkish companies listed on Borsa Istanbul (BIST) for the years between 2009 and 2020.

The findings indicate that when excess cash increases, the financial performance deteriorates only for firms with lower investments compared to firms with more investments. In addition, investment contributes to better financial performance for firms that hold cash surplus, whereas the influence of investment is insignificant for firms that have insufficient cash. Agency costs of equity exacerbate the adverse impact of excess cash on financial performance while agency costs of debt mitigate this effect. Excess cash reduces the financial performance of highly leveraged firms. However, this impact becomes insignificant when debt ratio decreases. The findings also show that investment has more significant role than business risk in building the precautionary motive to hold cash.

The findings of this article are limited to the Turkish market. Future research is still needed in other emerging markets to compare the results and reveal more about the effect of excess cash on firm performance, and how other factors can change this effect.

The findings verify the increased significance of excess cash in the presence of investment opportunities and difficulties in accessing external funds. Nevertheless, the role of the equity related agency problem in reducing the benefits of cash surplus confirms the necessity of policies that support corporate governance, especially in emerging markets.

This article, according to the knowledge of author, is the first to examine the role of agency costs associated with debt and equity, and the compound effect of investment opportunities and business risk on the nexus between excess internal funds and corporate financial performance in emerging markets.

Existing theories on the determining factors of corporate investment decisions raise the importance of financial market imperfections in explaining investment behavior. Many factors have been proposed as drivers of investment, mainly in developed economies, while emerging countries have almost been neglected. The main purpose of this study is to examine the effect of financing constraints on the investment behavior of a small context, namely, Jordan, with an imperfect environment.

This study considers panel data regressions from the industrial companies traded at the Amman Stock Exchange with a total of 1,058 firm-year observations.

The results are able to demonstrate that business size, tangibility, market-to-book ratio, profitability, financial slack and leverage are major drivers of investment choices. The results support the importance of information asymmetry in explaining the investment behavior of firms. Nonetheless, the Q-theory is in place, as is firm agility.

Policies to reduce information asymmetry are immediately needed to help firms increase investments by providing them with access to training, technology and market information. They also should enhance the firms’ opportunities for growth. Moreover, they should make it easier for businesses to access financial slack, such as by improving access to credit and financial institutions. They also can work to improve the financial infrastructure to meet the financing needs of businesses. Finally, smaller businesses should be assisted by improving their ability to invest and grow.

To the best of the authors’ knowledge, this is one of the first studies, if any, to investigate this issue in a distinct environment. Despite the unique characteristics of Jordan, the findings are applicable to other countries that experience comparable political and economic circumstances because Jordan has traits common to many emerging nations.

We study the potential effects of pension underfunding on corporate investment, financial constraints and improved employee bonding using 10 Pacific-Basin countries (including the United States, Australia, and eight Asian countries) at heterogeneous economic development stages and different regulatory environments. We document that corporate pensions are significantly underfunded in most countries of our sample in the period of 2001–2017, when interest rates were ultralow in most countries. In addition, firms from countries with stronger employee protection and more generous retirement benefits tend to show higher levels of underfunding in their defined benefit (DB) pension plans. To the extent of pension underfunding imposing constraints on corporate investment, we find that firms in these countries can face more constraints on investment when their pension is underfunded.

This paper explores how the manufacturer’s strategic choice (acquisition or investment) impacts product quality in a supply chain comprising two complementary suppliers and a common manufacturer.

The manufacturer faces six strategic choices to improve product quality: acquiring or investing in the high-capable supplier, the low-capable supplier, or both. As the Stackelberg leader, the manufacturer determines which strategy is adopted, while suppliers are separately responsible for components’ quality and wholesale prices. The authors use game theory and calculate the model with Mathematica.

The authors develop analytical models to analyze how acquisition costs, investment proportions, component importance and quality improvement coefficients influence decision-makers. The results show that the highest quality may not benefit the manufacturer. Investing in or acquiring a low-capable supplier is better than a high-capable supplier under certain conditions. If the gaps between two suppliers’ quality improvement coefficients and the importance of two components are dramatic, the manufacturer should choose an investment strategy.

This study contributes to the complementary supply chain management by comparing two kinds of strategies-acquisition and investment, with a high-capable supplier and a low-capable supplier.