Search results

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Identification of the direction of the sound source is very important for human–machine interfacing in the applications such as target detection on military applications and wildlife conservation. Considering its vast applications, this study aims to design, simulate, fabricate and test a bidirectional acoustic sensor having two cantilever structures coated with piezoresistive material for sensing has been designed, simulated, fabricated and tested.

The structure is a piezoresistive acoustic pressure sensor, which consists of two Kapton diaphragms with four piezoresistors arranged in Wheatstone bridge arrangement. The applied acoustic pressure causes diaphragm deflection and stress in diaphragm hinge, which is sensed by the piezoresistors positioned on the diaphragm. The piezoresistive material such as carbon or graphene is deposited at maximum stress area. Furthermore, the Wheatstone bridge arrangement has been formed to sense the change in resistance resulting into imbalanced bridge and two cantilever structures add directional properties to the acoustic sensor. The structure is designed, fabricated and tested and the dimensions of the structure are chosen to enable ease of fabrication without clean room facilities. This structure is tested with static and dynamic calibration for variation in resistance leading to bridge output voltage variation and directional properties.

This paper provides the experimental results that indicate sensor output variation in terms of a Wheatstone bridge output voltage from 0.45 V to 1.618 V for a variation in pressure from 0.59 mbar to 100 mbar. The device is also tested for directionality using vibration source and was found to respond as per the design.

The fabricated devices could not be tested for practical acoustic sources due to lack of facilities. They have been tested for a vibration source in place of acoustic source.

The piezoresistive bidirectional sensor can be used for detection of direction of the sound source.

In defense applications, it is important to detect the direction of the acoustic signal. This sensor is suited for such applications.

The present paper discusses a novel yet simple design of a cantilever beam-based bidirectional acoustic pressure sensor. This sensor fabrication does not require sophisticated cleanroom for fabrication and characterization facility for testing. The fabricated device has good repeatability and is able to detect the direction of the acoustic source in external environment.

Due to land resource scarcity, sustainable urban development in high-density cities has long been challenging. As such, many cities are formulating plans to “dig deep”, resulting in more citizens working and/or staying underground for longer periods of time. However, owing to the particularities of underground space, the factors involved in the creation of a healthy environment are different from those involved in aboveground developments. This study thus aims to investigate the influences of various underground environment factors on users' health through a holistic approach.

To achieve this aim, 12 underground sites and 12 corresponding aboveground sites are selected for a large-scale questionnaire survey, resulting in 651 survey samples. The survey covers post-occupancy evaluation of health (physical and psychosocial), underground environmental quality (visual, thermal, acoustic comfort, indoor air quality and ventilation), space design and greenery. Independent-sample T-test, Pearson correlation, multiple regression modelling and structural equation modelling are used to investigate whether significant differences exist between health of underground and aboveground users, and to develop an underground environment-health model for unveiling the significant associations between underground environment factors and users' health. To cross validate the results, an objective field measurement study is further conducted on six underground sites. The objective measurement results are used to cross validate the survey results.

The questionnaire results provide the following evidence: (1) health of underground users is significantly poorer than that of their aboveground counterparts; (2) underground development users' health is significantly affected by space design, greenery and environmental quality in terms of thermal comfort, indoor air quality, ventilation and acoustic comfort but not visual comfort; and (3) amongst the various identified factors, space design has the strongest predicting effects on human health. The field study echoes the survey findings and further unveils the relationships between different environmental factors and human health.

The results shed light on the importance of distinguishing between underground developments and aboveground ones in various guidelines and standards, especially those related to space management.

Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.

This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.

A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.

Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.

The purpose of this paper is to highlight the sources of noise generation in a library and suggest the implementation of a sound masking system to provide acoustic comfort, maintain speech privacy and create an environment more engaging for the users.

Analyzing the existing literature and exploring the existing practices as observed in different libraries, the study gives an overview of the sound masking initiatives in libraries.

With practical examples of libraries, the study demonstrates how a sound masking system has been implemented to invoke better acoustic design in the library. The expansion of various activities in the library and a gradual shift from individual attention to a collaborative approach necessitates a strong focus on the acoustic design architecture of the library. The study showcases how the libraries adopt sound masking with the introduction of acoustic panels, dual panel partitions, sound-absorbent false ceilings, sound insulation, sound isolation and noise-dampening measures, installing furniture with sound containment features, adopting vibration control mechanism, mounting of white noise machines, etc., keeping the aesthetic quotient of the library alive.

The study attempts to show the current practices of the adoption of the sound masking system in libraries and promotes collaborative reading with the creation of an acoustic design-influenced library environment to control noise and reverberation and provide a comfortable reading environment.

Human-induced marine environmental noise, such as commercial shipping and seismic exploration, is concentrated in the low-frequency range. Meanwhile, low-frequency sound signals can achieve long-distance propagation in water. To meet the requirements of long-distance underwater detection and communication, this paper aims to propose an micro-electro-mechanical system (MEMS) flexible conformal hydrophone for low-frequency underwater acoustic signals. The substrate of the proposed hydrophone is polyimide, with silicon as the piezoresistive unit.

This paper proposes a MEMS heterojunction integration process for preparing flexible conformal hydrophones. In addition, sensors prepared based on this process are non-contact flexible sensors that can detect weak signals or small deformations.

The experimental results indicate that making devices with this process cannot only achieve heterogeneous integration of silicon film, metal wire and polyimide, but also allow for customized positions of the silicon film as needed. The success rate of silicon film transfer printing is over 95%. When a stress of 1 Pa is applied on the x-axis or y-axis, the maximum stress on Si as a pie-zoresistive material is above, and the average stress on the Si film is around.

The flexible conformal vector hydrophone prepared by heterogeneous integration technology provides ideas for underwater acoustic communication and signal acquisition of biomimetic flexible robotic fish.

This paper aims to develop a comprehensive model on intra- and interpersonal emotion regulation (ER) in hospitality and tourism (H&T) service encounters.

A critical review and reflection of ER research from multiple disciplines was conducted. Methodologies appropriate for investigating ER were also reviewed.

A comprehensive framework was proposed to outline key influential factors, processes and consequences of intra- and interpersonal ER in service encounters in the H&T industry. Methodologies integrating advanced tools were suggested to measure complex and dynamic emotion generation and regulation processes in social interactions from a multimodal perspective.

The researchers developed a comprehensive conceptual model on both intra- and interpersonal ER based on a critical review of the most recent psychological research on ER. Various theoretical and methodological considerations are discussed, offering H&T scholars a solid starting point to explore dynamic emotion generation and regulation processes in complex social settings. Moreover, the model provides future directions for the expansion of ER theories, which have been mostly developed and tested based on laboratory research.

The proposed model addresses two critical issues identified in emotion research in the H&T field: the lack of a dynamic perspective and the neglect of the social nature of emotions. Moreover, the model provides a roadmap for future research.

Artificial fruit ripening is hazardous to mankind. In the recent past, artificial fruit ripening is increasing gradually due to its commercial benefits. To discriminate the type of fruit ripening involved at the vendors’ side, there is a great demand for on-sight ethylene detection in a nondestructive manner. Therefore, this study aims to deal with a comparison of various laboratory and portable methods developed so far with high-performance metrics to identify the ethylene detection at fruit ripening site.

This paper focuses on various types of technologies proposed up to date in ethylene detection, fabrication methods and signal conditioning circuits for ethylene detection in parts per million and parts per billion levels. The authors have already developed an infrared (IR) sensor to detect ethylene and also developed a lab-based setup belonging to the electrochemical sensing methods to detect ethylene for the fruit ripening application.

The authors have developed an electrochemical sensor based on multi-walled carbon nanotubes whose performance is relatively higher than the sensors that were previously reported in terms of material, sensitivity and selectivity. For identifying the best sensing technology for optimization of ethylene detection for fruit ripening discrimination process, authors have developed an IR-based ethylene sensor and also semiconducting metal-oxide ethylene sensor which are all compared with literature-based comparable parameters. This review paper mainly focuses on the potential possibilities for developing portable ethylene sensing devices for investigation applications.

The authors have elaborately discussed the new chemical and physical methods of ethylene detection and quantification from their own developed methods and also the key findings of the methods proposed by fellow researchers working on this field. The authors would like to declare that the extensive analysis carried out in this technical survey could be used for developing a cost-effective and high-performance portable ethylene sensing device for fruit ripening and discrimination applications.

This paper aims to disentangle Chinese-English-rich resources linguistic and speaker timbre features, achieving cross-lingual speaker transfer for Cambodian.

This study introduces a novel approach: the construction of a cross-lingual feature disentangler coupled with the integration of time-frequency attention adaptive normalization to proficiently convert Cambodian speaker timbre into Chinese-English without altering the underlying Cambodian speech content.

Considering the limited availability of multi-speaker corpora in Cambodia, conventional methods have demonstrated subpar performance in Cambodian speaker voice transfer.

The originality of this study lies in the effectiveness of the disentanglement process and precise control over speaker timbre feature transfer.

Indoor environmental quality (IEQ) in buildings has an impact on people’s health, productivity and comfort. Maintaining the highest possible IEQ level in complex buildings, such as health care, is difficult due to economic and organizational constraints. This study aims to categorize the vicinities in a typical health-care facility in terms of importance and criticality in relation to the various IEQ factors, as well as to develop an IEQ assessment procedure.

A comprehensive literature review, established standards and structured interviews with industrial hygiene professionals in health-care settings were used in this study. To test the applicability of the developed IEQ assessment procedure, a pilot study was conducted in an existing health-care facility.

This study categorized health-care facilities into various vicinities and discovered three respondents group had varying IEQ perceptions (facility managers, environmental health specialists and nurses). According to the findings, indoor air quality is the most important and dominant factor influencing overall IEQ in health-care facilities. The trial application of the framework shows that much work is needed to improve the level of response and readiness of facility management and occupants to allow for the effective use of the developed procedure.

Previous research did not include a detailed categorization of vicinities in health-care buildings based on IEQ requirements. The findings of this study will help to close this knowledge gap and guide facility managers and operators in recognizing the relative importance of different IEQ factors, maintaining functional requirements and identifying priorities when developing maintenance and operational procedures and allocating resources.