Search results

The purpose of current study deals with the development and wear testing of jute and cotton fiber reinforced with nano fly ash-based epoxy composites. Performance of waste cotton fabric nano hybrid composites are compared with waste jute fabric nano hybrid composites.

Basic hand layup technique was used to develop composites. To optimize the parameters and design of experiments, Taguchi design was implemented to test wear rate and co-efficient of friction as per ASTM standards. Performance of waste cotton fabric nano hybrid composites is compared with waste jute fabric nano hybrid composites.

Result shows that nano fly ash lowers the wear rate and co-efficient of friction in developed composites. Findings reveals that hybrid composites of waste jute Fabric with 3 Wt.% of nano fly ash performed best amongst all composites developed. Morphology of nano composites worn out surfaces are also analyzed through SEM.

Practically, textile waste, i.e. jute, cotton and nano fly ash (thermal power plant) all wastes, is used to develop composites for multi-function application.

Wastes are reused and recycled to develop epoxy-based composites for sustainable structures in aviation.

To the best of the authors’ knowledge, nano fly ash and jute, cotton combination is used for the first time to develop and test for wear application.

To contribute to the identification of the parameters influencing the behavior of textile-reinforced concrete (TRC), the purpose of this paper is to investigate the flexural behavior of TRC-based plates under four-point bending notably designed in the context of sustainable development and the substitution of mortar components with natural and abundant materials.

An extensive experimental campaign was focused about two main parameters. The first one emphases the textile reinforcements, such as the number of layers, the nature and the textile mesh size. In the second step, the composition of the mortar matrix was explored through the use of dune sand as a substitute of the river one.

Test results in terms of load-displacement response and failure patterns were highlighted, discussed and confronted to literature ones. As key findings, an increase of the load-bearing capacity and ductility, comparable to the use of an industrially produced second textile layer was recorded with the use of dune sand in the mortar mix design. The designed ecofriendly samples with economic concerns denote the significance of obtained outcomes in this research study.

The novelty of the present work was to valorize the use of natural dune sand to design new TRC samples to respond to the environmental and economical requirements. The obtained values provide an improved textiles–matrix interface performance compared to classical TRC samples issued from the literature.

In the corporate world, there is no certainty of survival. This research aims to identify firm-level factors that increase or decrease a firm's probability of exit and survival.

The study examines 153 listed textile sector firms in Pakistan over a 10-year period from 2009 to 2018, comprising 1,413 observations. The semi-parametric Cox regression model is used to process the results.

The study finds that larger and exporting firms are more likely to survive, while those with a high ratio of fixed assets to total assets, high expenditure on advertising and variable costs are less likely to survive. The relationship between age and firm survival is inconclusive.

Adaptability to the external environment provides a competitive advantage that is crucial for textile firms to reduce their chances of exit. The research is valuable for strategic managers and policymakers to identify focus areas to prevent firm exit.

This study supports the active learning theory, which suggests that new entrants in the textile sector of Pakistan should focus on becoming active market players, increasing efficiency and reducing variable costs to survive.

The textile sector is one of the sectors where competition is intense and requires the production of high-value-added products. This study aims to conduct patent analysis to find the technology status, recent trends, applications and technological evaluations of protective textile technologies in practice.

More than 36,840 patent documents related to protective textile technologies are available for researchers, patent examiners and patent researchers. Patent analysis is conducted to report the technology status, recent trends and applications of protective textile technologies. This analysis provides insights into the possible future directions of protective textile technologies in practice. Additionally, association rule mining (ARM) is performed to find the hidden patterns among protective textile technologies.

The development of protective textile technologies is revealed by the technology evaluation in this study. In addition, the sub-technology classes affecting protective textile technologies are examined using the cooperative patent classification (CPC) codes of the patent documents. Technology status and recent trends of protective textile technologies are provided in detail. The results of this study show that (1) protective textile technologies are constantly being developed, (2) the working areas of medical protective textiles are increasing, (3) there are frequent studies on fabric structures for saving lives within the framework of human needs and (4) there are four technology classes, namely A41D, Y10T, B32B and A62B impacting the other technology classes related to textile technologies such as D10B, Y10T, F41H, A62D, D04H, Y10S and D10B.

To have a competitive advantage in the marketplace, evaluation of textile technologies is critical in developing “functionalized” and “technologized” textile products. In particular, evaluating technologies in developing protective textile products is extremely important to meet customer demands and present competitive products in the market. Examining these patents for technology developers, decision-makers and policymakers is an urgent and necessary job. However, studies examining the development of protective textile technologies with patent analysis are very limited in the literature. To fill this gap, technology status, recent trends and applications of protective textile technologies are reported based on patent analysis and ARM in this study.

Mycelium is an upcoming bio-based alternative material that has various applications in different industries. Mycelium materials used as composites, leather, construction materials and some are even available for commercial purposes. However, there was not much research found when it came to the application of mycelium as a textile alternative. The purpose of this paper is to examine the potential of mycelium in the textile industry and its possible applications.

This review consolidates literature that refers the two major methods used in fungal mycelium production namely; as a composite and as a pure self-grown mycelium sheet. The study compared the current research status in this respective field and reported the scope in the pure mycelium development.

The results of the review reported that several research works are performed in composite production with different feedstock. The production methods and product development steps were well established for several applications from home utilities to construction materials. Whereas, in the case of self-grown mycelium sheet production only limited research works were found. Though the possibilities of engineered composite sheets are developed with various properties, research on self-grown pure mycelium sheets are at infant stage. Sensitive production methods, lower tensile, tearing, poor handle properties with brittle structure and non-uniformity in thickness are noted as limitations. Sustainable nature, self-grown three-dimensional nano-fibril network with porous structure are found to be advantageous.

The solid culture method was identified as a potential method to develop a sheet-like self-grown mycelium with different dimensions. The review results clearly show the lack of research in the direct application of self-grown pure mycelium area concerning feedstock material, fungal species selection and characterization of the developed product. Addressing the existing limitations will yield a sustainable textile material for fashion and textile industry with great potential.

This study aims to examine sustainability reporting through the lens of global reporting initiative (GRI) standards in developing economies, particularly in Pakistan, from the perspective of stakeholder theory, legitimacy theory, and system theory.

Qualitative and quantitative analyses on economic, social and environmental areas of sustainability reporting based on the GRI standards are applied across 57 organizations listed on the Pakistan stock exchange over the years 2016–2020.

The results from the content analysis and descriptive statistics show that overall sustainability reporting increased persistently over time and limited organizations disclose economic, social and environmental sustainability based on GRI standards. Moreover, the result from the two-tailed correlation analysis shows positive relations between economic, social and environmental sustainability reporting.

Following the GRI standards, the regulators, government and policymakers need to assess the sustainability reporting based on GRI standards to improve corporate operations' transparency, stakeholder trust and legitimacy. The organizations should move beyond the compliance of regulatory norms and adopt the globally accepted sustainability GRI standards to improve sustainability reporting. The same kind of sustainability reporting is also advised for other countries with similar backgrounds and sustainability challenges.

The integrated sustainability reporting framework based on GRI standards enables the organizations to work as a system of interconnected economic, social and environmental sustainability to resolve the issue of sustainability reporting, ensure the trust of multiple stakeholders and legitimize their business operations in society.

To the best of the authors' knowledge and thorough review of literature, this is the first study that examines the sustainability reporting based on GRI in the developing country of Pakistan to extend the findings of previous studies from conventional sustainability reporting to the globally accepted GRI based sustainability reporting. Using system theory, this study provides an additional contribution to the consideration concerning sustainability reporting based on GRI standards in the context of Pakistan.

This study aims to develop a four-dimensional (4D) textile composite that self-forms upon thermal stimulation while eliminating thermomechanical programming steps by using fused deposition modeling (FDM) 3D printing technology, and tries to refine the product development path for this composite.

Polylactic acid (PLA) printing filaments were deposited on prestretched Lycra-knitted fabric using desktop-level FDM 3D printing technology to construct a three-layer structure of thermally responsive 4D textiles. Subsequently, the effects of different PLA thicknesses and Lycra knit fabric relative elongation on the permanent shape of thermally responsive 4D textiles were studied. Finally, a simulation program was written, and a case in this study demonstrates the usage of thermally responsive 4D textiles and the simulation program to design a wrist support product.

The constructed three-layer structure of PLA and Lycra knitted fabric can self-form under thermal stimulation. The material can also achieve reversible transformation between a permanent shape and multiple temporary shapes. Thinner PLA deposition and higher relative elongation of the Lycra-knitted fabric result in the greater curvature of the permanent shape of the thermally responsive 4D textile. The simulation program accurately predicted the permanent form of multiple basic shapes.

The proposed method enables 4D textiles to directly self-form upon thermal, which helps to improve the manufacturing efficiency of 4D textiles. The thermal responsiveness of the composite also contributes to building an intelligent human–material–environment interaction system.

Conventional sportswear design does not take into account body size changes that many individuals experience (e.g. through pregnancy, puberty, menstruation, etc.). This paper aims to detail both the construction of a novel wearable shape-adaptive composite and a new meso-scale material design method, which enables the optimal creation of these structures.

This work reports the development of a predictive computational model and a corresponding design tool, including results of a tensile testing protocol to validate their outputs. A mathematical model was developed to explore the geometric parameter space of a bi-stable composite system, which then feeds into an optimization design tool.

The authors found that it is possible to fabricate shape-adaptive composites via 3D printing bi-stable structures, and adhering them to a base textile. Experimental mechanical tensile testing showed good agreement with the predictive model in mid-range unit cell amplitude designs. To illustrate how the optimization design tool works this paper details two design examples, one for expected shape change during pregnancy and one for targeted compression for high performance swimwear. The optimized design parameters are shown to replicate the target parameters, however there is potential for further improvement with a lower stiffness base textile.

Although there is a wealth of research on multi-stable mechanisms, there is a dearth of studies that apply these structures in the wearable composite space. Additionally, there is a need for design methods which leverage the structurally-programmable capabilities of multi-stable structures to create optimized, high-performance functional composites.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

The paper aims to investigate the comfort-related performances of an innovative solar shading solution based on a new composite patented material that consists of a cement-based matrix coupled with a stretchable three-dimensional textile. The paper’s aim is, through a performance-based generative design approach, to develop a high-performance static shading system able to guarantee adequate daylit spaces, a connection with the outdoors and a glare-free environment in the view of a holistic and occupant-centric daylight assessment.

The paper describes the design and simulation process of a complex static shading system for digital manufacturing purposes. Initially, the optical material properties were characterized to calibrate radiance-based simulations. The developed models were then implemented in a multi-objective genetic optimization algorithm to improve the shading geometries, and their performance was assessed and compared with traditional external louvres and overhangs.

The system developed demonstrates, for a reference office space located in Milan (Italy), the potential of increasing useful daylight illuminance by 35% with a reduced glare of up to 70%–80% while providing better uniformity and connection with the outdoors as a result of a topological optimization of the shape and position of the openings.

The paper presents the innovative nature of a new composite material that, coupled with the proposed performance-based optimization process, enables the fabrication of optimized shading/cladding surfaces with complex geometries whose formability does not require ad hoc formworks, making the process fast and economic.