Search results

The purpose of this paper is to develop a high-performance composite emulsion cement waterproof coating. The coating has excellent durability and is effective in protecting cement mortar substrates from harmful ions.

The polymer cement waterproof coatings with different emulsion compounding ratios were tested for mechanical properties and water resistance after alkali immersion, water immersion, thermal aging and UV aging, and the coatings were analyzed by infrared spectroscopy after aging to evaluate its durability. Meanwhile, the coating that presents favorable durability was applied to cement mortar test blocks. The protective effect of the coating on the test blocks was tested by immersion method, and X-ray diffraction analysis was performed on the eroded test blocks.

The coating with neoprene latex/acrylate latex weight ratio of 90/10 presents favorable durability and has superior overall performance. Besides, when it is applied to cement mortar blocks, the coatings effectively reduced the erosive effect of harmful ions on cement mortar blocks, resulting in much lower mass change ratios and less internal structural damage of the blocks significantly.

The obtained coating will be of great application potential for use in building waterproofing construction. Moreover, the coating can practically prevent chloride ions and sulfate ions from penetrating cement-based materials.

This study aims to analyze the factors, evaluation techniques of the durability of existing railway engineering.

China has built a railway network of over 150,000 km. Ensuring the safety of the existing railway engineering is of great significance for maintaining normal railway operation order. However, railway engineering is a strip structure that crosses multiple complex environments. And railway engineering will withstand high-frequency impact loads from trains. The above factors have led to differences in the deterioration characteristics and maintenance strategies of railway engineering compared to conventional concrete structures. Therefore, it is very important to analyze the key factors that affect the durability of railway structures and propose technologies for durability evaluation.

The factors that affect the durability and reliability of railway engineering are mainly divided into three categories: material factors, environmental factors and load factors. Among them, material factors also include influencing factors, such as raw materials, mix proportions and so on. Environmental factors vary depending on the service environment of railway engineering, and the durability and deterioration of concrete have different failure mechanisms. Load factors include static load and train dynamic load. The on-site rapid detection methods for five common diseases in railway engineering are also proposed in this paper. These methods can quickly evaluate the durability of existing railway engineering concrete.

The research can provide some new evaluation techniques and methods for the durability of existing railway engineering.

This study aims to investigate the influence of polyepoxysuccinic acid sodium (PESA), a green antiscalant, on the nucleation, crystallization and precipitation of magnesium phosphate.

The conductivity method was used to investigate the maximum relative supersaturation of magnesium phosphate across various PESA dosages. Subsequently, a magnesium phosphate scale was prepared using the static scale inhibition method (GB/T16632-1996) and then analyzed via scanning electron microscopy.

The findings showed that PESA extends the induction period of magnesium phosphate crystallization, reduces crystal growth rate and elevates the solution’s relative supersaturation. Notably, PESA exerts a low dosage effect on inhibition of the magnesium phosphate scale, with the optimal dosage identified at 10 mL. Scanning electron microscopy revealed that PESA dispenses a dispersing effect on the magnesium phosphate scale, generating numerous concave, convex and deeper pores on the scale particles’ surface, and thereby significantly enhancing the surface area, especially when using an antiscalant with variable dosages.

This study sheds new light on the impact of PESA, a green antiscalant, on the crystallization and precipitation of magnesium phosphate, thus paving the way for the development of enhanced and eco-friendly scale inhibition strategies in future applications.

The purpose of this study is to explore the interfacial adhesion between superhydrophobic coatings FC-X (X = 1%, 2%, 3%, 4% and 5%) and the concrete substrate, along with the impact of FC-X on the water repellency characteristics of the concrete substrate.

One synthetic step was adopted to prepare novel F-SiO₂ NP hybrid fluororesin coating. The impact of varying mass fractions of F-SiO₂ NPs on the superhydrophobicity of FC-X was analyzed and subsequently confirmed through water contact angle (WCA) measurements. Superhydrophobic coatings were simply applied to the concrete substrate using a one-step spraying method. The interfacial adhesion between FC-X and the concrete substrate was analyzed using tape pasting tests and abrasion resistance measurements. The influence of FC-X on the water repellency of the concrete substrate was investigated through measurements of water absorption, impermeability and electric flux.

FC-4% exhibits excellent superhydrophobicity, with a WCA of 157.5° and a sliding angle of 2.3°. Compared to control sample, FC-X exhibits better properties, including chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.

This study offers a thorough investigation into the practical implications of enhancing the durability and water repellency of concrete substrates by using superhydrophobic coatings, particularly FC-4%, which demonstrates exceptional superhydrophobicity alongside remarkable chemical durability, wear resistance, adhesion strength, abrasion resistance, water resistance and impermeability.

Through the examination of the interfacial adhesion between FC-X and the concrete substrate, along with an assessment of FC-X’s impact on the water repellency of the concrete, this paper provides valuable insights into the practical application of superhydrophobic coatings in enhancing the durability and performance of concrete materials.

The restoration and strengthening of QT600 is an industry bottleneck challenge. The Co-12 cladding layer has great wear and corrosion resistance. The purpose of this paper is to quantitatively reveal the transient evolution law of the corrosion process of Co-12 cladding layer on QT600 surface.

In this paper, a three-dimensional numerical model of the corrosion process of Co-12 cladding layer by QT600 laser cladding is established. The interaction between pitting pits and corrosion medium is considered to reveal the transient evolution of ion concentration, electrode potential, pH and corrosion rate at different locations.

The calculation shows that the ion concentration in pitting pit changes Cl⁻>Co²⁺>Na⁺, pH value decreases from top to bottom and corrosion rate at bottom is greater than that at top. The electrochemical corrosion test of Co-12 cladding layer was carried out. It is shown that the current density of QT600 increases by an order of magnitude compared to the Co-12 cladding layer, and the corrosion rate is 4.862 times higher than that of the cladding layer.

The results show that Co-12 cladding layer has great corrosion resistance, which provides an effective way for QT600 protection.

The purpose of this study is to prepare a robust superhydrophobic coating on concrete substrate with remarkable chemical and mechanical durability through “all-covalent” strategy.

Amino-modified silica nano/micro-particles were prepared through two synthetic steps. “All-covalent” strategy was introduced to prepare a robust superhydrophobic coating on concrete surface via a “all-in-one” dispersion and a simple spraying method. The successful construction of the products was confirmed by Fourier transform infrared spectroscopy, water contact angles (WCA), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). The concrete protective properties were verified by solution immersion test, pull-off test and rapid chloride migration coefficient test. The mechanical durability was tested by falling sand impact.

Hierarchical structures combined with the low-surface-energy segments lead to typically superhydrophobic coating with a WCA of 156° and a sliding angle of 1.3°. The superhydrophobic coating prepared through “all-covalent” strategy not only improves chemical and mechanical durability but also achieves higher corrosion and wear resistance than the comparison sample prepared by physically blending strategy. More importantly, the robust superhydrophobic coating showed excellent adhesion and protective performance of concrete engineerings.

This new “all-covalent” superhydrophobic coating could be applied as a concrete protective layer with properties of self-cleaning, anti-graffiti, etc.

Introduction of both silica nanoparticles and silica microparticles to prepare a robust superhydrophobic coating on concrete surface through “all-covalent” strategy has not been systematically studied previously.

Money laundering (ML) is a major criminal offence stemming from unethical practices by personnel on the ground at Chattogram Port, an important import and export facility in Bangladesh. Because money can be more easily laundered through imports, it is necessary to investigate the dubious process in this sector. This study aims to identify the items most regularly used for easy ML and the factors contributing to their vulnerability.

This research uses a qualitative approach and analyses information from primary sources. Data is obtained from customs officials, port authority personnel, importers and customs brokers through semi-structured questionnaires. Although there are many techniques for ML, this study only found three most overwhelming: under-invoicing, over-invoicing and misdeclaration. A few case studies have been used based on newspaper reports and the internet to triangulate the qualitative data.

Four import items – food products, garments, capital machinery and chemicals – have a higher risk of ML. This study also revealed that money launderers prefer under-invoicing food and garment items. Misdeclaration is more commonly associated with capital machinery and chemical items. Over-invoicing, on the other hand, is only prevalent in government purchases. The port authorities need to pay particular attention to these issues.

As ML is an ongoing activity that changes over time, the findings of this research are circumscribed by the data collected at a single point in time. Additionally, this research did not consider alternative laundering methods.

The research results can provide a basis for creating effective anti-money laundering (AML) strategies to assist with sustainable economic growth.

Developing effective AML measures can help combat corruption and establish good governance in the country and support human well-being.

This paper presents original research findings based on technical analysis. The Chattogram Port Authority and the National Board of Revenue have accepted and used the main findings in a collaborative action plan to tackle ML. The Bangladesh Bank, the country’s central bank, has also incorporated the necessary guidelines and regulations into the Money Laundering Prevention Act, 2012.

Replacing conventional mordants by benign mordants, rare earth (RE) salts have been used in the process of natural dyeing with annatto seed extract. The purpose was threefold – first, to increase the dye uptake through these new mordants; second, to have better fastness properties of dyed swatches and third, to have lesser effluent pollution, as the new RE mordants are used in one-tenth quantities only.

Sustainable natural dyeing was attained by using RE salts as mordant in one-tenth quantity, for natural dyeing, replacing the conventional mordants such as alum and ferrous sulphate. Annatto extract has been used as natural dye.

Through the study, it was inferred that the natural dyeing using annatto seed extract gives very good colour depth on the dyed swatches and also shows marked improvement in fastness properties.

Research implication is that often it is expected that any new chemical used in the textile processing adds on to the effluent load; however, contrary to that, this study found that the use of RE salt is very beneficial as it is used in smaller quantities, but gives far better dyeing results.

RE salts can be used in natural dyeing without causing any harm to the environment and dyers.

Use of RE salts in natural dyeing is a new concept. It is a very safe technology and can be used without causing any harm to the environment and the dyers.

This study is unique as it focuses on the use of RE salts in natural dyeing replacing the conventional mordants, which are used ten times more in quantity.

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve good dyeing depth, fastness and ultraviolet (UV) protection.

Firstly, single factor experiments were used to determine the basic dyeing conditions of Coreopsis tinctoria. The optimal process conditions for direct dyeing were determined through orthogonal experiments. After that, the dyeing with mordant was used. Based on the previously determined optimal process conditions, silk fabrics were dyed with different mordanting methods, with different mordants and mordant dosages. The dyeing results were compared, in terms of the K/S values of the dyed fabrics, to determine the most appropriate dyeing conditions with mordant.

The extract of Coreopsis tinctoria can dye silk fabrics satisfactorily. Good dyeing depth and fastness can be obtained by using suitable dyeing methods and dyeing conditions, especially when using the natural mordant pomegranate rind and the rare earth mordant neodymium oxide. The silk fabrics dyed with Coreopsis tinctoria have good UV resistance, which allows a desirable finishing effect to be achieved while dyeing, using a safe and environmentally friendly method.

The composition of Coreopsis tinctoria is complex, and the specific composition of colouring the silk fibre has not been determined. There are many factors that affect the dyeing experiment, which have an impact on the experimental results.

The results of this study may help expand the application of Coreopsis tinctoria beyond medicine.

To the best of the authors’ knowledge, this paper is the first report on dyeing silk with the extract of Coreopsis tinctoria achieving good dyeing results. Its depth of staining and staining fastness were satisfactory. Optimum dyeing method and dyeing conditions have been identified. The fabric dyed with Coreopsis tinctoria has good UV protection effect, which is conducive to improving the application value of the dyeing fabric. The findings help offer a new direction for the application of medicinal plants in the eco-friendly dyeing of silk.

This paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts.

The effects of temperature, the concentration of inorganic salts and Na₂CO₃ and the initial pH value on the degradation of RR24 were studied. Furthermore, the relationship between free radicals and RR24 degradation effect was investigated. Microscopic routes and mechanisms of dye degradation were further confirmed by testing the degradation karyoplasmic ratio of the product. The feasibility of the one-bath cyclic dyeing in the recycled dyeing wastewater was confirmed through the properties of dye utilization and color parameters.

The appropriate conditions were 0.3 g/L of sodium persulphate and treatment at 95°C for 30 min, which resulted in a decolorization rate of 98.4% for the dyeing wastewater. Acidic conditions are conducive to rapid degradation of dyes, while ·OH or SO₄⁻· have a destructive effect on dyes under alkaline conditions. In the early stage of degradation, ·OH played a major role in the degradation of dyes. For sustainable cyclic dyeing of RR24, inorganic salts were reused in this dyeing process and dye uptake increased with the times of cycles. After the fixation, some Na₂CO₃ may be converted to other salts, thereby increasing the dye uptake in subsequent cyclic staining. However, it has little impact on the dye exhaustion rate and color parameters of dyed fabrics.

The recommended technology not only reduces the quantity of dyeing wastewater but also enables the recycling of inorganic salts and water, which meets the requirements of sustainable development and clean production.