To read this content please select one of the options below:

Facile preparation of robust superhydrophobic coating on concrete surface through “all-covalent” strategy

Pingping Hou (School of Electronic Information, Nanjing Vocational College of Information Technology, Nanjing, China)
HongYan Huang (School of Electronic Information, Nanjing Vocational College of Information Technology, Nanjing, China)
Yong Wang (School of Electronic Information, Nanjing Vocational College of Information Technology, Nanjing, China)
Jun Zhang (School of Electronic Information, Nanjing Vocational College of Information Technology, Nanjing, China)
Dewen Sun (Department of Research and Development, State Key Laboratory of High Performance Civil Engineering Materials, Nanjing, China)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 23 February 2022

Issue publication date: 1 June 2023

165

Abstract

Purpose

The purpose of this study is to prepare a robust superhydrophobic coating on concrete substrate with remarkable chemical and mechanical durability through “all-covalent” strategy.

Design/methodology/approach

Amino-modified silica nano/micro-particles were prepared through two synthetic steps. “All-covalent” strategy was introduced to prepare a robust superhydrophobic coating on concrete surface via a “all-in-one” dispersion and a simple spraying method. The successful construction of the products was confirmed by Fourier transform infrared spectroscopy, water contact angles (WCA), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). The concrete protective properties were verified by solution immersion test, pull-off test and rapid chloride migration coefficient test. The mechanical durability was tested by falling sand impact.

Findings

Hierarchical structures combined with the low-surface-energy segments lead to typically superhydrophobic coating with a WCA of 156° and a sliding angle of 1.3°. The superhydrophobic coating prepared through “all-covalent” strategy not only improves chemical and mechanical durability but also achieves higher corrosion and wear resistance than the comparison sample prepared by physically blending strategy. More importantly, the robust superhydrophobic coating showed excellent adhesion and protective performance of concrete engineerings.

Practical implications

This new “all-covalent” superhydrophobic coating could be applied as a concrete protective layer with properties of self-cleaning, anti-graffiti, etc.

Originality/value

Introduction of both silica nanoparticles and silica microparticles to prepare a robust superhydrophobic coating on concrete surface through “all-covalent” strategy has not been systematically studied previously.

Keywords

Acknowledgements

This work was supported financially by The Natural Science Foundation of Jiangsu Province (BK20211370).

Citation

Hou, P., Huang, H., Wang, Y., Zhang, J. and Sun, D. (2023), "Facile preparation of robust superhydrophobic coating on concrete surface through “all-covalent” strategy", Pigment & Resin Technology, Vol. 52 No. 4, pp. 439-445. https://doi.org/10.1108/PRT-12-2021-0143

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles