Search results

The purpose of this study is to investigate and analyse the potential of existing buildings in the UK to contribute to the net-zero emissions target. Specifically, it aims to address the significant emissions from building fabrics which pose a threat to achieving these targets if not properly addressed.

The study, based on a literature review and ten (10) case studies, explored five investigative approaches for evaluating building fabric: thermal imaging, in situ U-value testing, airtightness testing, energy assessment and condensation risk analysis. Cross-case analysis was used to evaluate both case studies using each approach. These methodologies were pivotal in assessing buildings’ existing condition and energy consumption and contributing to the UK’s net-zero ambitions.

Findings reveal that incorporating the earlier approaches into the building fabric showed great benefits. Significant temperature regulation issues were identified, energy consumption decreased by 15% after improvements, poor insulation and artistry quality affected the U-values of buildings. Implementing retrofits such as solar panels, air vents, insulation, heat recovery and air-sourced heat pumps significantly improved thermal performance while reducing energy consumption. Pulse technology proved effective in measuring airtightness, even in extremely airtight houses, and high airflow and moisture management were essential in preserving historic building fabric.

The research stresses the need to understand investigative approaches’ strengths, limitations and synergies for cost-effective energy performance strategies. It emphasizes the urgency of eliminating carbon dioxide (CO₂) and greenhouse gas emissions to combat global warming and meet the 1.5° C threshold.

This study aims to establish a multi-physics-coupled model for an electrostatic particulate matter (PM) sensor. The focus lies on investigating the deposition patterns of particles within the sensor and the variation in the regeneration temperature field.

Computational simulations were initially conducted to analyse the distribution of particles under different temperature and airflow conditions. The study investigates how particles deposit within the sensor and explores methods to expedite the combustion of deposited particles for subsequent measurements.

The results indicate that a significant portion of the particles, approximately 61.8% of the total deposited particles, accumulates on the inside of the protective cover. To facilitate rapid combustion of these deposited particles, a ceramic heater was embedded within the metal shielding layer and tightly integrated with the high-voltage electrode. Silicon nitride ceramic, selected for its high strength, elevated temperature stability and excellent thermal conductivity, enables a relatively fast heating rate, ensuring a uniform temperature field distribution. Applying 27 W power to the silicon nitride heater rapidly raises the gas flow region's temperature within the sensor head to achieve a high-temperature regeneration state. Computational results demonstrate that within 200 s of heater operation, the sensor's internal temperature can exceed 600 °C, effectively ensuring thorough combustion of the deposited particles.

This study presents a novel approach to address the challenges associated with particle deposition in electrostatic PM sensors. By integrating a ceramic heater with specific material properties, the study proposes an effective method to expedite particle combustion for enhanced sensor performance.

The hybrid nanofluid flow due to a rotating disk has numerous applications, including centrifugal pumps, paper production, polymers dying, air filtration systems, automobile cooling and solar collectors. This study aims to investigate the convective heat transport and magnetohydrodynamics (MHD) hybrid nanofluid flow past a stretchable rotating surface using the Yamada-Ota and Xue models with the impacts of heat generation and thermal radiation.

The carbon nanotubes such as single-wall carbon nanotubes and multi-wall carbon nanotubes are suspended in a base fluid like water to make the hybrid nanofluid. The problem’s governing partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. Then, the numerical solutions are found with a bvp4c function in MATLAB software. The impacts of pertinent parameters on the flow and temperature fields are depicted in tables and graphs.

Two solution branches are discovered in a certain range of unsteadiness parameters. The fluid temperature and the rate of heat transport are enhanced when the thermal radiation and heat generation effects are increased. The Yamada-Ota model has a higher temperature than the Xue model. Furthermore, it is observed that only the first solution remains stable when the stability analysis is implemented.

To the best of the authors’ knowledge, the results stated are original and new with the investigation of MHD hybrid nanofluid flow with convective heat transfer using the extended version of Yamada-Ota and Xue models. Moreover, the novelty of the present study is improved by taking the impacts of heat generation and thermal radiation.

This study investigates the coupling effects between temperature, permeability and stress fields during the development of geothermal reservoirs, comparing the impacts of inter-well pressure differentials, reservoir temperature and heat extraction fluid on geothermal extraction.

This study employs theoretical analysis and numerical simulation to explore the coupling mechanisms of temperature, permeability and stress fields in a geothermal reservoir using a thermal-hydrological-mechanical (THM) three-field coupling model.

The results reveal that the pressure differential between wells significantly impacts geothermal extraction capacity, with SC-CO2 achieving 1.83 times the capacity of water. Increasing the aperture of hydraulic and natural fractures effectively enhances geothermal production, with a notable enhancement for natural fractures.

The research provides a critical theoretical foundation for understanding THM coupling mechanisms in geothermal extraction, supporting the optimization of geothermal resource development and utilization.

The present work focuses on evaluating the physical and mechanical characteristics of geopolymer concrete (GPC) by replacing the sodium silicate waste (SSW) in place of traditional river sand. The aim is to create eco-friendly concrete that mitigates the depletion of conventional river sand and conserves natural resources. Additionally, the study seeks to explore how the moisture content of filler materials affects the performance of GPC.

SSW obtained from the sodium silicate industry was used as filler material in the production of GPC, which was cured at ambient temperature. Instead of the typical conventional river sand, SSW was substituted at 25 and 50% of its weight. Three distinct moisture conditions were applied to both river sand and SSW. These conditions were classified as oven dry (OD), air dry (AD) and saturated surface dry (SSD).

As the proportion of SSW increased, there was a decrease in the slump of the GPC. The setting time was significantly affected by the higher percentage of SSW. The presence of angular-shaped SSW particles notably improved the compressive strength of GPC when replacing a portion of the river sand with SSW. When exposed to elevated temperatures, the performance of the GPC with SSW exhibited similar behavior to that of the mix containing conventional river sand, but it demonstrated a lower residual strength following exposure to elevated temperatures.

Exploring the possible utilization of SSW as a substitute for river sand in GPC, and its effects on the performance of the proposed mix. Analyzing, how varying moisture conditions affect the performance of GPC containing SSW. Evaluating the response of the GPC with SSW exposed to elevated temperatures in contrast to conventional river sand.

The purpose of this paper is to investigate the thermoelastic interactions in a homogeneous, transversely isotropic infinite medium with a spherical cavity in the context of two temperature Lord-Shulman (2TLS) generalized theory of thermoelasticity considering Eringen’s nonlocal theory and memory dependent derivative (MDD). Memory-dependent derivative is found to be better than fractional calculus for reflecting the memory effect which leads us to the current investigation.

The governing field equations of the problem are solved analytically using the eigenvalue approach in the transformed domain of Laplace when the cavity’s boundary is being loaded thermomechanically. Using MATLAB software the numerical solution in real space-time domain is obtained by Stehfest method.

Numerical results for the different thermophysical quantities are presented in graphs and the effects of delay time parameter, non-local parameter and two temperature parameters are studied thereafter. The outcomes of this study convince that the displacement u, conductive temperature ϕ, thermodynamic temperature θ are concave upward whereas radial stress τ_rr is concave downward for every choice of delay time parameter ω, two temperature parameter η and non-local parameter “ζ”. As a specific instance of our findings, the conclusions of an equivalent problem involving integer order thermoelasticity theory can be obtained, and the corresponding results of this article can be readily inferred for isotropic materials.

The novelty of this research lies in the adoption of generalized thermoelastic theory with memory dependent derivative and Eringen’s nonlocality for analyzing the thermoelastic interactions in an infinite body with spherical cavity by employing eigenvalue approach. It has applications to many thermo-dynamical systems.

This paper presents a Monotonic Unbounded Schemes Transformer (MUST) approach to bound/monotonize (remove undershoots and overshoots) unbounded spatial differencing schemes automatically, and naturally. Automatically means the approach (1) captures the critical cell Peclet number when an unbounded scheme starts to produce physically unrealistic solution automatically, and (2) removes the undershoots and overshoots as part of the formulation without requiring human interventions. Naturally implies, all the terms in the discretization equation of the unbounded spatial differencing scheme are retained.

The authors do not formulate new higher-order scheme. MUST transforms an unbounded higher-order scheme into a bounded higher-order scheme.

The solutions obtained with MUST are identical to those without MUST when the cell Peclet number is smaller than the critical cell Peclet number. For cell Peclet numbers larger than the critical cell Peclet numbers, MUST sets the nodal values to the limiter value which can be derived for the problem at-hand. The authors propose a way to derive the limiter value. The authors tested MUST on the central differencing scheme, the second-order upwind differencing scheme and the QUICK differencing scheme. In all cases tested, MUST is able to (1) capture the critical cell Peclet numbers; the exact locations when overshoots and undershoots occur, and (2) limit the nodal value to the value of the limiter values. These are achieved by retaining all the discretization terms of the respective differencing schemes naturally and accomplished automatically as part of the discretization process. The authors demonstrated MUST using one-dimensional problems. Results for a two-dimensional convection–diffusion problem are shown in Appendix to show generality of MUST.

The authors present an original approach to convert any unbounded scheme to bounded scheme while retaining all the terms in the original discretization equation.

Understanding the mechanical and thermal behavior of materials is the goal of the branch of study known as fractional thermoelasticity, which blends fractional calculus with thermoelasticity. It accounts for the fact that heat transfer and deformation are non-local processes that depend on long-term memory. The sphere is free of external stresses and rotates around one of its radial axes at a constant rate. The coupled system equations are solved using the Laplace transform. The outcomes showed that the viscoelastic deformation and thermal stresses increased with the value of the fractional order coefficients.

The results obtained are considered good because they indicate that the approach or model under examination shows robust performance and produces accurate or reliable results that are consistent with the corresponding literature.

This study introduces a proposed viscoelastic photoelastic heat transfer model based on the Moore-Gibson-Thompson framework, accompanied by the incorporation of a new fractional derivative operator. In deriving this model, the recently proposed Caputo proportional fractional derivative was considered. This work also sheds light on how thermoelastic materials transfer light energy and how plasmas interact with viscoelasticity. The derived model was used to consider the behavior of a solid semiconductor sphere immersed in a magnetic field and subjected to a sudden change in temperature.

This study introduces a proposed viscoelastic photoelastic heat transfer model based on the Moore-Gibson-Thompson framework, accompanied by the incorporation of a new fractional derivative operator. In deriving this model, the recently proposed Caputo proportional fractional derivative was considered. This work also sheds light on how thermoelastic materials transfer light energy and how plasmas interact with viscoelasticity. The derived model was used to consider the behavior of a solid semiconductor sphere immersed in a magnetic field and subjected to a sudden change in temperature.

This study aims to investigate numerically the impact of the three-dimensional convective nanoliquid flow on a rotating frame embedded in the non-Darcy porous medium in the presence of activation energy. The cross-diffusion effects, i.e. Soret and Dufour effects, and heat generation are included in the study. The convective heating condition is applied on the bounding surface.

The control model consisted of a system of partial differential equations (PDE) with boundary constraints. Using suitable similarity transformation, the PDE transformed into an ordinary differential equation and solved numerically by the Runge–Kutta–Fehlberg method. The obtained results of velocity, temperature and solute concentration characteristics plotted to show the impact of the pertinent parameters. The heat and mass transfer rate and skin friction are also calculated.

It is found that both Biot numbers enhance the heat and mass distribution inside the boundary layer region. The temperature increases by increasing the Dufour number, while concentration decreases by increasing the Dufour number. The heat transfer is increased up to 8.1% in the presence of activation energy parameter (E). But, mass transfer rate declines up to 16.6% in the presence of E.

The applications of combined Dufour and Soret effects are in separation of isotopes in mixture of gases, oil reservoirs and binary alloys solidification. The nanofluid with porous medium can be used in chemical engineering, heat exchangers and nuclear reactor.

This study is mainly useful for thermal sciences and chemical engineering.

The uniqueness in this research is the study of the impact of activation energy and cross-diffusion on rotating nanoliquid flow with heat generation and convective heating condition. The obtained results are unique and valuable, and it can be used in various fields of science and technology.

The purpose of this study is to analyze the free convection phenomena arising from a temperature disparity between a cold circular cylinder and a heated corrugated cylinder.

Numerical simulations were used to analyze the convection patterns. The inner cylinder, made of a thermally conductive solid material, was heated through its inner surface, while the space between the cylinders was filled with air. The governing equations for velocity, pressure and temperature were solved using a Galerkin finite element method-based solver for partial differential equations.

The study explored various parameters affecting the dynamic and thermal structure of the flow, including the Rayleigh number (10³ ≤ Ra ≤ 10⁶), the number of corrugations of the inner cylinder (3 ≤ N ≤ 18), the thermal conductivity of the hollow cylinder (1 ≤ K ≤ 200) and the angle of inclination of the inner cylinder (0° ≤ φ ≤ 90°). Results indicated a notable sensitivity of flow intensity to changes in the Rayleigh number and the inner cylinder’s inclination angle φ. Particularly, for Ra = 10⁶, the average heat transfer rate increased by 203% with a K ratio increment from 1 to 100 but decreased by 16.3% as the number of corrugations increased from 3 to 18.

This research contributes to understanding the complex interplay between geometry, thermal properties and flow dynamics in natural convection systems involving cylindrical geometries. The findings offer useful insights for improving the transfer of heat procedures in real-world situations.