Search results

To reduce the heat load of a gas turbine blade, its surface is covered with an outer layer of ceramics with high thermal resistance. The purpose of this paper is the selection of ceramics with such a low heat conduction coefficient and thickness, so that the permissible metal temperature is not exceeded on the metal-ceramics interface due to the loss ofmechanical properties.

Therefore, for given temperature changes over time on the metal-ceramics interface, temperature changes over time on the inner side of the blade and the assumed initial temperature, the temperature change over time on the outer surface of the ceramics should be determined. The problem presented in this way is a Cauchy type problem. When analyzing the problem, it is taken into account that thermophysical properties of metal and ceramics may depend on temperature. Due to the thin layer of ceramics in relation to the wall thickness, the problem is considered in the area in the flat layer. Thus, a one-dimensional non-stationary heat flow is considered.

The range of stability of the Cauchy problem as a function of time step, thickness of ceramics and thermophysical properties of metal and ceramics are examined. The numerical computations also involved the influence of disturbances in the temperature on metal-ceramics interface on the solution to the inverse problem.

The computational model can be used to analyze the heat flow in gas turbine blades with thermal barrier.

A number of inverse problems of the type considered in the paper are presented in the literature. Inverse problems, especially those Cauchy-type, are ill-conditioned numerically, which means that a small change in the inputs may result in significant errors of the solution. In such a case, regularization of the inverse problem is needed. However, the Cauchy problem presented in the paper does not require regularization.

The aim of this paper is to demonstrate the use of historical building performance data to identify potential issues with the build quality and operation of a building, as a means of narrowing the scope of in-depth further review.

The response of a room to the difference between internal and external temperatures is used to demonstrate patterns in thermal response across monitored rooms in a single building, to clearly show where rooms are under-performing in terms of their ability to retain heat during unconditioned hours. This procedure is applied to three buildings of different types, identifying the scope and limitation of this method and indicating areas of building performance deficiency.

The response of a single space to changing internal and external temperatures can be used to determine whether it responds differently to other monitored buildings. Spaces where thermal bridging and changes in use from design were encountered exhibit noticeably different responses.

Application of this methodology is limited to buildings where temperature monitoring is undertaken both internally for a variety of spaces, and externally, and where knowledge of the uses of monitored spaces is available. Naturally ventilated buildings would be more suitable for analysis using this method.

This paper contributes to the understanding of building energy performance from a data-driven perspective, to the knowledge on the disparity between building design intent and reality, and to the use of basic commonly recorded performance metrics for analysis of potentially detrimental building performance issues.

The electrical properties of piezoelectric vibrators have a crucial influence on the operating state of ultrasonic motors. In order to solve the problem that the current piezoelectric vibrator generates a large amount of heat during vibration to degrade its performance, which in turn affects the normal operation of ultrasonic motors, this paper prepares a novel piezoelectric vibrator and tests its maximum vibration velocity under the working condition, which is more than twice as much as that of the current commercial PZT-8.

The crystal structures of the samples were analyzed by using an X-ray diffractometer. For microstructure observation, samples were observed by scanning electron microscope (SEM). The quasi-static piezoelectric coefficient meter (ZJ-3AN) was used for piezoelectric measurement. Dielectric properties were measured by utilizing an impedance analyzer (Agilent 4294A) with a laboratory heating unit. Ferroelectric hysteresis loops were obtained using a ferroelectric analyzer (Radiant, Multiferroic 100). A Doppler laser vibrometer (Polytec PSV-300F, Germany) and a power amplifier were used for piezoelectric vibration measurements, during which the temperature rise was determined by an infrared radiation thermometer (Victor 303, China).

The ceramics exhibit enhanced piezoelectric performance at 0.1–0.4 mol% of Yb doping contents. The ceramic of 0.4 mol% Yb reaches the maximal internal bias field and presents a larger mechanical quality factor of 1,692 compared with that of 0.2 mol% Yb-doped ceramic, in spite of a slightly decreased dielectric constant of 439 pC/N, the unit of the piezoelectric constant, which is the ratio of the local charge (pC) to the frontal force (N) and electromechanical coupling coefficient of 0.63. The vibrator with this large mechanical quality factor ceramic displays a vibration velocity of up to 0.81 m/s under the constraint of 20 °C temperature rising, which is much higher than commercial high-power piezoelectric ceramics PZT-8.

The enhanced high-power properties of the piezoelectric vibrator by Yb doping may provide a potential application for the high-performance USM and offer the possibility of long-term stable operation under high power for special equipment like USM. In the subsequent phase of research, the novel PZT-based high-power piezoelectric vibrator can be utilized in the USM, and the motor's performance will be evaluated under aerospace conditions to objectively assess the reliability of the piezoelectric vibrator.

Incineration has become increasingly important in many large cities around the world because of fast urbanization and population growth. The benefits of energy production and large reduction in the waste volume to landfills also contribute to its growing adaptation for solid waste management for these cities. At the same time, the environmental impact of the pollutant gases emitted from the incineration process is a common concern for various stakeholders which must be properly addressed. To minimize the pollutant gas emission levels, as well as maximize the energy efficiency, it is critically important to optimize the combustion performance of an incinerator freeboard which would require the development of reliable approaches based on computational fluid dynamics (CFD) modeling. A critical task in the CFD modeling of an incinerator furnace requires the specification of waste characteristics along the moving grate as boundary conditions, which is not available in standard CFD packages at present. This study aims to address this gap by developing a numerical incinerator waste bed model.

A one-dimensional Lagrangian model for the incineration waste bed has been developed, which can be coupled to the furnace CFD model. The changes in bed mass due to drying, pyrolysis, devolatilization and char oxidation are all included in the model. The mass and concentration of gases produced in these processes through reactions are also predicted. The one-dimensional unsteady energy equations of solid and gas phases, which account for the furnace radiation, conduction, convection and heat of reactions, are solved by the control volume method.

The Lagrangian model is validated by comparing its prediction with the experimental data in the literature. The predicted waste bed height reduction, temperature profile and gas concentration are in reasonable agreement with the observations.

The simplicity and efficiency of the model makes it ideally suitable to be used for coupling with the computational furnace model to be developed in future (so as to optimize incinerator designs).

The purpose of this paper is to investigate humanitarian supply chains in the context of the Ukrainian crisis as example of complex emergency. The paper focuses on a selection of support modes: in-kind donations, cash-based assistance and local procurement.

This paper adopts a case-study approach and interpretive paradigm. Findings are based on the analysis of primary sources including interviews with three Polish humanitarian organizations, internal documents, and secondary sources such as published reports.

Findings indicate that in a middle-income urbanized country such as Ukraine non-standard modes such as cash transfer programs and local procurement can be employed, since the necessary infrastructure and market are operational. However, each mode has limitations, so they should match the local context and the needs of diverse social groups.

The findings and recommendations are specific to the case analyzed, Ukraine, and its socio-economic context. The research contributes to discussions about mode selection, stressing the links between mode, stage of the disaster response and local context.

Applying cash transfers and local procurement can reduce supply chain costs, such as transport and warehousing. Shortened supply chains enable faster responses and increased agility.

Cash transfers and procurement involve the local community and beneficiaries, and can better fulfill needs maintaining people’s dignity. However, for vulnerable groups and those in conflict zones, in-kind goods are a better option.

The author argues that the much-discussed dichotomy of cash or goods does not reflect reality; local and regional procurement should be added as important support modes in middle-income countries in crisis.

Under the dual pressure of resources and environment, many countries have focused on the role of railways in promoting low-carbon development of integrated transportation and of even the whole society. This paper aims to provide a comprehensive study on methods to improve railway energy efficiency in other national railways and achievements made by China’s railways in the past practice, and then to propose ways in which in the future China’s railways could rationally select the path of improving energy efficiency regarding the needs of the nation's ever-shifting development and carry out the re-engineering for mechanism innovation in energy conservation and emission reduction process.

This paper first studies other national railways that have tried to promote the improvement of railway energy efficiency by the ways of technology, management and structural reconstruction to reduce energy consumption and carbon emissions. Among them, the effect of structural energy conservation and emission reduction has become more prominent. It has become the main energy conservation and emission reduction measure adopted by foreign railway sectors. The practice of energy conservation and emission reduction of railways in various countries has tended to shift from a technical level to a structural one.

Key aspects in improving energy efficiency include re-optimization of energy structure, re-innovation of energy-saving technologies and optimization of transportation organization. Path selection includes continuing to promote electrified railway construction, increasing the use of new and renewable energy sources, and promoting the reform of railway transportation organizations.

This paper provides further challenges and research directions in the proposed area and has referential value for the methodologies, approaches for practice in a Chinese context. To achieve the expected goals, relevant supporting policies and measures need to be formulated, including actively guiding integrated transportation toward railway-oriented development, promoting innovation in energy-saving and emission reduction mechanisms and strengthening policy incentives, focusing on improving the energy efficiency of railways through market behavior. At the same time, it is necessary to pay attention to new phenomena in the railway industry for track and analysis.

This study aims to solve the problem of weld quality inspection, for the aluminum alloy profile welding structure of high-speed train body has complex internal shape and thin plate thickness (2–4 mm), the conventional nondestructive testing method of weld quality is difficult to implement.

In order to solve this problem, the ultrasonic creeping wave detection technology was proposed. The impact of the profile structure on the creeping wave detection was studied by designing profile structural test blocks and artificial simulation defect test blocks. The detection technology was used to test the actual welded test blocks, and compared with the results of X-ray test and destructive test (tensile test) to verify the accuracy of the ultrasonic creeping wave test results.

It is indicated that that X-ray has better effect on the inspection of porosities and incomplete penetration defects. However, due to special detection method and protection, the detection speed is slow, which cannot meet the requirements of field inspection of the welding structure of aluminum alloy thin-walled profile for high-speed train body. It can be used as an auxiliary detection method for a small number of sampling inspection. The ultrasonic creeping wave can be used to detect the incomplete penetration welds with the equivalent of 0.25 mm or more, the results of creeping wave detection correspond well with the actual incomplete penetration defects.

The results show that creeping wave detection results correspond well with the actual non-penetration defects and can be used for welding quality inspection of aluminum alloy thin-wall profile composite welding joints. It is recommended to use the echo amplitude of the 10 mm × 0.2 mm × 0.5 mm notch as the criterion for weld qualification.

We conduct a multidisciplinary systematic literature review on climate neutrality in the supply chain. While carbon neutrality has gained prominence, our study argues that achieving carbon neutrality alone is not enough to address climate change effectively, as non-CO₂ greenhouse gases (GHG) are potent contributors to global warming.

We used multiple databases, including EBSCO, ProQuest, Science Direct, Emerald and Google Scholar, to identify articles related to climate neutrality in the context of non-CO₂ gases. A total of 71 articles in environmental science, climate change, energy systems, agriculture and logistics are reviewed to provide insights into the climate neutrality of supply chains.

We find that, in addition to CO₂, other GHG such as methane, nitrous oxide, ozone and fluorinated gases also significantly contribute to climate change. Our literature review identified several key pillars for achieving net-zero GHG emissions, including end-use efficiency and electrification, clean electricity supply, clean fuel supply, “GHG capture, storage and utilization,” enhanced land sinks, reduced non-CO₂ emissions and improved feed and manure management.

We contribute to the literature on climate neutrality of supply chains by emphasizing the significance of non-CO₂ GHG along with CO₂ and highlighting the need for a comprehensive approach to climate neutrality in addressing climate change. This study advances the understanding of climate neutrality of supply chains and contributes to the discourse on effective climate change mitigation strategies. It provides clear future research directions.