Search results

The purpose of this study is to propose a simplifying approach for modelling a reliability test. Modelling the reliability tests of printed circuit board (PCB)/microelectronic component assemblies requires the adoption of several simplifying assumptions. This study introduces and validates simplified assumptions for modeling a four-point bend test on a PCB/wafer-level chip scale packaging assembly.

In this study, simplifying assumptions were used. These involved substituting dynamic imposed displacement loading with an equivalent static loading, replacing the spherical shape of the interconnections with simplified shapes (cylindrical and cubic) and transitioning from a three-dimensional modelling approach to an equivalent two-dimensional model. The validity of these simplifications was confirmed through both quantitative and qualitative comparisons of the numerical results obtained. The maximum principal plastic strain in the solder balls and copper pads served as the criteria for comparison.

The simplified hypotheses were validated through quantitative and qualitative comparisons of the results from various models. Consequently, it was determined that the replacement of dynamic loading with equivalent static loading had no significant impact on the results. Similarly, substituting the spherical shape of interconnections with an equivalent shape and transitioning from a three-dimensional approach to a two-dimensional one did not substantially affect the precision of the obtained results.

This study serves as a valuable resource for researchers seeking to model accelerated reliability tests, particularly in the context of four-point bending tests. The results obtained in this study will assist other researchers in streamlining their numerical models, thereby reducing calculation costs through the utilization of the simplified hypotheses introduced and validated herein.

This paper aims to systematically study the effects of reflow temperature and SAC0307 (SAC) content on the micromorphology and mechanical properties of Sn58Bi-xSAC0307 composite solder joints to meet the requirements of high integration and low-temperature packaging of devices and provide references for the application of composite solder joints.

Sn58Bi and SAC0307 solder paste was mechanically mixed in different proportions to prepare Sn58Bi-xSAC0307/ENIG solder joints. The thermal properties, microstructure and mechanical properties of the composite solder joints were studied.

As SAC content in the solder increases, the balling temperature of SnBi-SAC solder gradually increases. The addition of SAC alloy reduces the grain size of large Bi-rich phase, and there are small-sized dispersed Bi and Ag3Sn particles in the bulk solder. The intermetallic compounds composition of the SnBi-xSAC/ENIG solder joint changes from Ni3Sn4 to (Ni, Cu)3Sn4 and (Cu, Ni)6Sn5 with SAC increasing. As the soldering temperature increases, the strength of all solder joints shows a rising trend. Among them, the shear strength of SnBi-20SAC solder joints at a reflow temperature of 150°C is approximately 37 MPa. As the reflow temperature increases to 250°C, the shear strength of solder joints increases to approximately 67 MPa.

This study provides a reference for the optimization of low-temperature solder composition and soldering process under different package designs.

This paper aims to compare and evaluate the influence of package designs and characteristics on the mechanical reliability of electronic assemblies when subjected to harmonic vibrations.

Using finite element analysis (FEA), the effect of package design-related parameters, including the interconnect array configuration, i.e. full vs perimeter, and package size, on solder mechanical stresses are fully addressed.

The results of FEA simulations revealed that the number of solder rows or columns available in the array, could significantly affect solder stresses. In addition, smaller packages result in lower solder stresses and differing distributions.

In literature, there are no papers that discuss the effect of solder array layout on electronic packages vibration reliability. In addition, general rules for designing electronic assemblies subjected to harmonic vibration loadings are proposed in this paper.

The purpose of this paper is to illustrate the new technical demands and reliability challenges to printed circuit board (PCB) designs, materials and processes when the transmission frequency increases from Sub-6 GHz in previous generations to millimeter (mm) wave in fifth-generation (5G) communication technology.

The approach involves theoretical analysis and actual case study by various characterization techniques, such as a stereo microscope, metallographic microscope, scanning electron microscope, energy dispersive spectroscopy, focused ion beam, high-frequency structure simulator, stripline resonator and mechanical test.

To meet PCB signal integrity demands in mm-wave frequency bands, the improving proposals on copper profile, resin system, reinforcement fabric, filler, electromagnetic interference-reducing design, transmission line as well as via layout, surface treatment, drilling, desmear, laminating and electroplating were discussed. And the failure causes and effects of typical reliability issues, including complex permittivity fluctuation at different frequencies or environments, weakening of peel strength, conductive anodic filament, crack on microvias, the effect of solder joint void on signal transmission performance and soldering anomalies at ball grid array location on high-speed PCBs, were demonstrated.

The PCB reliability problem is the leading factor to cause failures of PCB assemblies concluded from statistical results on the failure cases sent to our laboratory. The PCB reliability level is very essential to guarantee the reliability of the entire equipment. In this paper, the summarized technical demands and reliability issues that are rarely reported in existing articles were discussed systematically with new perspectives, which will be very critical to identify potential reliability risks for PCB in 5G mm-wave applications and implement targeted improvements.

This paper aims to study the effect of different Ni content on the microstructure and properties of Sn-0.7Cu alloy. Then, the spreading area, wetting angle, interface layer thickness and microstructure of the soldering interface was observed and analyzed at different soldering temperatures and times.

Sn-0.7Cu-xNi solder alloy was prepared by a high-frequency induction melting furnace. Then Sn-0.7Cu-xNi alloy was soldered on a Cu substrate at different soldering temperatures and times.

It was found that Ni made the intermetallic compounds in the Sn-0.7Cu solder alloy gradually aggregate and coarsen, and the microstructure was refined. The phase compositions of the solder alloy are mainly composed of the ß-Sn phase and a few intermetallic compounds, Cu₆Sn₅ + (Cu, Ni)₆Sn₅. The maximum value of 12.1 HV is reached when the Ni content is 0.1 Wt.%. When the Ni content is 0.5 Wt.%, the wettability of the solder alloy increases by about 15%, the interface thickness increases by about 8.9% and the scallop-like structure is the most refined. When the soldering time is 10 min and the soldering temperature is 280 °C, the wettability of Sn-0.7Cu-0.2Ni is the best.

It is groundbreaking to combine the change in soldering interface with the soldering industry. The effects of different soldering temperatures and times on the Sn-0.7Cu-xNi alloy were studied. Under the same conditions, Sn-0.7Cu-0.2Ni exhibits better wettability and more stable solder joint stability.

The study aims to ascertain the influence of solder conductive particle types and substrate widths on the current carrying capability of flex-on-board (FOB) assemblies. By comparing Sn58Bi and SAC305 particles and varying substrate widths, the research sought to provide insights into the stability and performance of solder joints under different scenarios, particularly in high-power applications.

The study used a comprehensive design/methodology, encompassing the investigation of solder conductive particle types (Sn58Bi and SAC305) and substrate widths on the current carrying capability of FOB assembly. Stable solder joints were obtained by manipulating the curing speed of anisotropic conductive films for both particle types. Various tests were conducted, including current carrying capability assessments under differing conditions.

The study revealed that larger substrate widths yielded higher current carrying capability due to increased contact area and reduced contact resistance. Notably, solder joints remained stable beyond the solder melting temperature due to encapsulation by cured epoxy resin. SAC305 solder joints exhibited superior current carrying capability over Sn58Bi in continuous high-voltage conditions. The results emphasized the stability of SAC305 solder joints and their suitability for robust interconnections in high-power FOB assemblies.

This study contributes by offering a comprehensive assessment of the impact of solder particle types and substrate widths on solder joint performance in FOB assemblies. The finding that SAC305 joints outperform Sn58Bi under continuous high-voltage conditions adds significant value. Moreover, the observation of stable solder joints beyond solder melting temperature due to resin encapsulation introduces a novel aspect to solder joint reliability. These insights provide valuable guidance for designing robust and high-performance interconnections in demanding applications.

This study aims to address the problem of low-temperature wave soldering in industry production with Sn-9Zn-2.5 Bi-1.5In alloys and develop qualified process parameters. Sn–Zn eutectic alloys are lead-free solders applied in consumer electronics due to their low melting point, high strength, and low cost. In the electronic assembly industry, Sn–Zn eutectic alloys have great potential for use.

This paper explored developing and implementing process parameters for low-temperature wave soldering of Sn–Zn alloys (SN-9ZN-2.5BI-1.5 In). A two-factor, three-level design of the experiments experiment was designed to simulate various conditions parameters encountered in Sn–Zn soldering, developed the nitrogen protection device of waving soldering and proposed the optimal process parameters to realize mass production of low-temperature wave soldering on Sn–Zn alloys.

The Sn-9Zn-2.5 Bi-1.5In alloy can overcome the Zn oxidation problem, achieve low-temperature wave soldering and meet IPC standards, but requires the development of nitrogen protection devices and the optimization of a series of process parameters. The design experiment reveals that preheating temperature, soldering temperature and flux affect failure phenomena. Finally, combined with the process test results, an effective method to support mass production.

In term of overcome Zn’s oxidation characteristics, anti-oxidation wave welding device needs to be studied. Various process parameters need to be developed to achieve a welding process with lower temperature than that of lead solder(Sn–Pb) and lead-free SAC(Sn-0.3Ag-0.7Cu). The process window of Sn–Zn series alloy (Sn-9Zn-2.5 Bi-1.5In alloy) is narrow. A more stringent quality control chart is required to make mass production.

In this research, the soldering temperature of Sn-9Zn-2.5 Bi-1.5In is 5 °C and 25 °C lower than Sn–Pb and Sn-0.3Ag-0.7Cu(SAC0307). To the best of the authors’ knowledge, this work was the first time to apply Sn–Zn solder alloy under actual production conditions on wave soldering, which was of great significance for the study of wave soldering of the same kind of solder alloy.

Low-temperature wave soldering can supported green manufacturing widely, offering a new path to achieve carbon emissions for many factories and also combat to international climate change.

There are many research papers on Sn–Zn alloys, but methods of achieving low-temperature wave soldering to meet IPC standards are infrequent. Especially the process control method that can be mass-produced is more challenging. In addition, the metal storage is very high and the cost is relatively low, which is of great help to provide enterprise competitiveness and can also support the development of green manufacturing, which has a good role in promoting the broader development of the Sn–Zn series.

This study aims to investigate the influence of different solder alloy materials on passive devices during laser soldering process. Solder alloy material has been found to significantly influence the solder joint’s quality, such as void formation that can lead to cracks, filling time that affects productivity and fillet shape that determines the solder joint’s reliability.

Finite volume method (FVM)-based simulation that was validated using real laser soldering experiment is used to evaluate the effect of various solder alloy materials, including SAC305, SAC387, SAC396 and SAC405 in laser soldering. These solders are commonly used to assemble the pin-through hole (PTH) capacitor onto the printed circuit board.

The simulation results show how the void ratio, filling time and flow characteristics of different solder alloy materials affect the quality of the solder joint. The optimal solder alloy is SAC396 due to its low void ratio of 1.95%, fastest filling time (1.3 s) to fill a 98% PTH barrel and excellent flow characteristics. The results give the ideal setting for the parameters that can increase the effectiveness of the laser soldering process, which include reducing filling time from 2.2 s to less than 1.5 s while maintaining a high-quality solder joint with a void ratio of less than 2%. Industries that emphasize reliable soldering and effective joint formation gain the advantage of minimal occurrence of void formation, quick filling time and exceptional flowability offered by this solution.

This research is expected not only to improve solder joint reliability but also to drive advancements in laser soldering technology, supporting the development of efficient and reliable microelectronics assembly processes for future electronic devices. The optimized laser soldering material will enable the production of superior passive devices, meeting the growing demands of the electronics market for smaller, high-performance electronic products.

The comparison of different solder alloy materials for PTH capacitor assembly during the laser soldering process has not been reported to date. Additionally, volume of fluid numerical analysis of the quality and reliability of different solder alloy joints has never been conducted on real PTH capacitor assemblies.

This study aims to investigate the possible defects and their root causes in a soft-termination multilayered ceramic capacitor (MLCC) when subjected to a thermal reflow process.

Specimens of the capacitor assembly were subjected to JEDEC level 1 preconditioning (85 °C/85%RH/168 h) with 5× reflow at 270°C peak temperature. Then, they were inspected using a 2 µm scanning electron microscope to investigate the evidence of defects. The reliability test was also numerically simulated and analyzed using the extended finite element method implemented in ABAQUS.

Excellent agreements were observed between the SEM inspections and the simulation results. The findings showed evidence of discontinuities along the Cu and the Cu-epoxy layers and interfacial delamination crack at the Cu/Cu-epoxy interface. The possible root causes are thermal mismatch between the Cu and Cu-epoxy layers, moisture contamination and weak Cu/Cu-epoxy interface. The maximum crack length observed in the experimentally reflowed capacitor was measured as 75 µm, a 2.59% difference compared to the numerical prediction of 77.2 µm.

This work's contribution is expected to reduce the additional manufacturing cost and lead time in investigating reliability issues in MLCCs.

Despite the significant number of works on the reliability assessment of surface mount capacitors, work on crack growth in soft-termination MLCC is limited. Also, the combined experimental and numerical investigation of reflow-induced reliability issues in soft-termination MLCC is limited. These cited gaps are the novelties of this study.

This trigger article explores established European gender-mainstreaming urban planning frameworks of urban parks to analyze and identify ways that could be applied or adapted for Arabian Gulf cities. It aims to accelerate the mainstreaming process, increasing women’s participation and inclusion in urban spaces, paving the way for future research.

Analytical frameworks are created by reviewing legal and policy evolution, city-issued guidelines and European cities’ case studies (Barcelona, Berlin, Paris and Vienna) engaged in gender mainstreaming in urban planning. These analytical tools are then applied to assess two Arabian Gulf parks (Al Azaiba Wadi Park, Muscat, Oman, and Dahl Al-Hamam Park, Doha, Qatar), suggesting a possible future research methodology.

Success factors in European cities include integrating female perspectives, detailed user analysis, specific planning solutions and political will. Despite differing social and cultural contexts, commonalities exist for female park users in Europe and the Arabian Gulf. This trigger article proposes a methodology for assessing the potential effective application or adaptation of European established frameworks in the Gulf context to accelerate gender mainstreaming.

The paper proposes a methodology for future research, noting limitations such as limited input on design preparation processes in Gulf City park case studies, a lack of feedback from park users and only a brief overview of sociocultural differences. Future research should explore nuanced cultural contexts, including historical processes and gender dynamics, thorough literature review, expanded case study analysis and participatory approaches. The proposed methodology aims to demonstrate how European frameworks can guide gender-mainstreaming efforts in diverse contexts, facilitating collaborative solutions for inclusive urban planning.

Drawing from decades of European gender-mainstreaming activities, the paper distills urban planning principles and best practices for application or adaptation in the Arab Gulf.

Enhancing the park experience for women through planning and design boosts gender equality in cities, benefiting their physical and social well-being.

An original methodology is suggested for adapting well-developed European gender-mainstreaming frameworks to Arabian Gulf parks. Authored by a male, this paper aims to advance gender issues in planning while exploring the role men can play in contributing to such.