Search results

This study aims to investigate the effects of organizational culture factors on the selection of software process development models and develops a conceptual model for selecting and adopting process development models with an organizational culture approach, using 12 criteria and their sub-criteria defined in Fey and Denison’s model (12 criteria).

The research hypotheses were investigated using statistical analysis, and then the criteria and sub-criteria were selected based on Fey and Denison’s model and the experts’ viewpoints. Afterward, the organizational culture of the selected company was measured using the data from 2016 and 2017, based on Fey and Denison’s questionnaire. Due to the correlation between the criteria, using the decision-making trial and evaluation technique, the correlation between sub-criteria were determined, and by analytical network process method and using Super-Decision software, the process development model was preferred to the 12 common models in information systems development.

Results indicated a significant and positive effect of organizational culture factors (except the core values factor) on the selection of development models. Also, by changing the value of organizational culture, the selected process development model changed either. Sensitivity analysis performed on the sub-criteria implied that by changing and improving some sub-criteria, the organization will be ready and willing to use the agile or risk-based models such as spiral and win-win models. Concerning units where the mentioned indicators were at moderate and low limits, models such as waterfall, V-shaped and incremental worked more appropriately.

While many studies were performed in comparing development models and investigating their strengths and weaknesses, and the impact of organizational culture on the success of information technology projects, literature indicated that the impact of organizational sub-culture prevailing in the selection of development process models has not been investigated. In this study, new factors and indicators were addressed affecting the selection of development models with a focus on organizational culture. Correlation among the factors and indicators was also investigated and, finally, a conceptual model was proposed for proper adoption of the models and methodologies of system development.

This study aims to understand how practitioners use their insights in software development models to share experiences within and between organizations.

This is a qualitative study of practitioners in software development projects, in large-, medium- or small-size businesses. It analyzes interview material in three-step iterations to understand reflexive practice when using software development models.

The study shows how work processes are based on team members’ experiences and common views. This study highlights the challenges of organizational learning in system development projects. Current practice is unreflective, habitual and lacks systematic ways to address recurring problems and share information within and between organizations. Learning is episodic and sporadic. Knowledge from previous experience is individual not organizational.

Software development teams and organizations tend to learn about, and adopt, software development models episodically. This research expands understanding of how organizational learning takes place within and between organizations with practitioners who participate in teams. Learnings show the potential for further research to determine how new curriculums might be formed for teaching software development model improvements.

Security assurance evaluation (SAE) is a well-established approach for assessing the effectiveness of security measures in systems. However, one aspect that is often overlooked in these evaluations is the assurance context in which they are conducted. This paper aims to explore the role of assurance context in system SAEs and proposes a conceptual model to integrate the assurance context into the evaluation process.

The conceptual model highlights the interrelationships between the various elements of the assurance context, including system boundaries, stakeholders, security concerns, regulatory compliance and assurance assumptions and regulatory compliance.

By introducing the proposed conceptual model, this research provides a framework for incorporating the assurance context into SAEs and offers insights into how it can influence the evaluation outcomes.

By delving into the concept of assurance context, this research seeks to shed light on how it influences the scope, methodologies and outcomes of assurance evaluations, ultimately enabling organizations to strengthen their system security postures and mitigate risks effectively.

Additive manufacturing also known as 3D printing is an evolving advanced manufacturing technology critical for the new era of complex machinery and operating systems. Manufacturing systems are increasingly faced with risk of attacks not only by traditional malicious actors such as hackers and cyber-criminals but also by some competitors and organizations engaged in corporate espionage. This paper aims to elaborate a plausible risk practice of designing and demonstrate a case study for the compromised-based malicious for polymer 3D printing system.

This study assumes conditions when a machine was compromised and evaluates the effect of post compromised attack by studying its effects on tensile dog bone specimens as the printed object. The designed algorithm removed predetermined specific number of layers from the tensile samples. The samples were visually identical in terms of external physical dimensions even after removal of the layers. Samples were examined nondestructively for density. Additionally, destructive uniaxial tensile tests were carried out on the modified samples and compared to the unmodified sample as a control for various mechanical properties. It is worth noting that the current approach was adapted for illustrating the impact of cyber altercations on properties of additively produced parts in a quantitative manner. It concurrently pointed towards the vulnerabilities of advanced manufacturing systems and a need for designing robust mitigation/defense mechanism against the cyber altercations.

Density, Young’s modulus and maximum strength steadily decreased with an increase in the number of missing layers, whereas a no clear trend was observed in the case of % elongation. Post tensile test observations of the sample cross-sections confirmed the successful removal of the layers from the samples by the designed method. As a result, the current work presented a cyber-attack model and its quantitative implications on the mechanical properties of 3D printed objects.

To the best of the authors’ knowledge, this is the original work from the team. It is currently not under consideration for publication in any other avenue. The paper provides quantitative approach of realizing impact of cyber intrusions on deteriorated performance of additively manufactured products. It also enlists important intrusion mechanisms relevant to additive manufacturing.

The future increase of chronic diseases in the world requires new challenges in the health domain to improve patients' care from the point of view of the organizational processes, clinical pathways and technological solutions of digital health. For this reason, the present paper aims to focus on the study and application of well-known clinical practices and efficient organizational approaches through an innovative model (TALIsMAn) to support new care process redesign and digitalization for chronic patients.

In addition to specific clinical models employed to manage chronic conditions such as the Population Health Management and Chronic Care Model, we introduce a Business Process Management methodology implementation supported by a set of e-health technologies, in order to manage Care Pathways (CPs) digitalization and procedures improvement.

This study shows that telemedicine services with advanced devices and technologies are not enough to provide significant changes in the healthcare sector if other key aspects such as health processes, organizational systems, interactions between actors and responsibilities are not considered and improved. Therefore, new clinical models and organizational approaches are necessary together with a deep technological change, otherwise, theoretical benefits given by telemedicine services, which often employ advanced Information and Communication Technology (ICT) systems and devices, may not be translated into effective enhancements. They are obtained not only through the implementation of single telemedicine services, but integrating them in a wider digital ecosystem, where clinicians are supported in different clinical steps they have to perform.

The present work defines a novel methodological framework based on organizational, clinical and technological innovation, in order to redesign the territorial care for people with chronic diseases. This innovative ecosystem applied in the Italian research project TALIsMAn is based on the concept of a continuum of care and digitalization of CPs supported by Business Process Management System and telemedicine services. The main goal is to organize the different socio-medical activities in a unique and integrated IT system that should be sustainable, scalable and replicable.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

The purpose of this paper is to examine the contribution of big data in the transforming process of an IT firm to a learning organization.

The authors adopted a qualitative research approach to define and interpret the ideas and experiences of the IT firms’ employees and to present them to the readers directly. For this purpose, they followed a single-case study design. They researched on a small and medium enterprise operating in the IT sector in Düzce province, Turkey. This paper used a semi-structured interview and document analysis as data collecting methods. In all, eight interviews were conducted with employees. Brochures and website of the organization were used as data sources for the document analysis.

As a result of in-depth interviews and document analysis, the authors formed five main themes that describe perception of big data and learning organization concepts, methods and practices adopted in transforming process, usage areas of big data in organization and how the sample organization uses big data as a learning organization. The findings of this paper show that the sample organization is a learning IT firm that has used big data in transforming to learning organization and in maintaining the learning culture.

The findings contribute to literature as it is one of the first studies that examine the influence of big data on the transformation process of an IT firm to a learning organization. The findings reveal that IT firms benefit from the solutions of big data while learning. However, as the design of the research is single-case study, the findings may be specific to the sample organization. Future studies are required that examine the subject in different samples and by different research designs.

In literature, research on how IT firms’ managers and employees use big data in organizational learning process is limited. The authors expect that this paper will shed light on future research that examines the effect of big data on the learning process of the organization.

This study aims to examine the enablers of productivity of enterprise-level Agile development process using modified total interpretative structural modeling (TISM). The two main objectives of the current study are to determine the variables influencing enterprise-level agile development productivity and to develop modified TISM for the corresponding components.

To identify enablers of the productivity of enterprise-level agile software development process a literature review and opinions of domain experts were collected. A hierarchical relationship among variables that show direct and indirect influence is created using the modified TISM (M-TISM) technique with Cross Impact Matrix-Multiplication Applied to Classification analysis. This study examined and analyzed the relationships between the determinants within the enterprise using a M-TISM technique.

With the literature review, the study could identify ten enabling factors of the productivity of Agile development process at the enterprise level. Results depict that program increment (PI) planning and scalable backlog management, continuous integration and continuous delivery (CI/CD), agile release trains (ART), agile work culture, delivery excellence, lean and DevOps practices, value stream mapping (VMS), team skills and expertise, collaborative culture, agile coaching, customer engagement have an impact on the productivity of enterprise-level Agile development process. The results show that team collaboration, agile ways of working and customer engagement have a greater impact on productivity improvement for enterprise-level Agile development process.

The developed model is useful for organizations employing scaled Agile development processes in software development. This study provides a recommended listing of key enablers, that may enable productivity improvements in the Agile development process at the enterprise level. Strategists should focus on team collaboration and Agile project management. This study offers a modified TISM model to academicians to help them understand the effects of numerous variables on maintaining the productivity of an enterprise-level Agile. The identified characteristics and their hierarchical structure can help project managers during the execution of Agile projects at the enterprise level, more effectively, increasing their success and productivity.

The study addresses the gap in the literature by interpretative relationships between the identified enabling factors. The model validation is carried out by a panel of nine experts from several information technology organizations deploying Agile software development at the enterprise level. This unique method broadens the knowledge base in Agile software development at scale and provides project managers and practitioners with a practical foundation.

In recent years, the robotic process automation (RPA) technology has increasingly been used to automate business processes. While a lot of research has been published on the potential and benefits of the technology, only a few studies have conducted research on challenges related to RPA adoption. Hence, this study aims to identify and discuss challenges related to RPA implementation projects.

Following an inductive methodology, interviews have been conducted with consultants who were involved in multiple RPA implementation projects. Hence, their extensive experience and views contribute to a detailed and in-depth understanding of the phenomena under research.

The results suggest that there are various process-related, technical, resource-related, psychological and coordinative challenges that must be considered when conducting an RPA implementation project.

This paper contributes to knowledge by presenting a new typology of challenges, as well as providing an in-depth discussion of the individual challenges that organizations face.

The advancement of digital maturity at a business level has proven to be challenging, with limited time, resources and skills in extracting and mapping business processes. In order to advance digitalization, the mapping of all business activities is essential. To close this gap, this research is aimed at enabling the operational level extraction and classification of business activities using a graphical methodology. This objective is accomplished through the development of a digital tool that leverages Software Development Life Cycle (SDLC) principles.

This research is focused on facilitating rapid extraction of business activities with the adoption of a graphical methodology. Business activities are captured through a digital tool in a structured, interlinked and hierarchical manner.

Notably, this work is novel as it introduces a new graphical tool to replace traditional tools in the domain of Business Process Mapping (BPM). This graphical tool is distinguished by a unique feature; that is a self-configuring database with the flexibility to capture all process options, providing innovative solutions to the challenges faced in digitalizing business processes.

This work is original in that a new graphical interface is developed to replace traditional tools in the space of BP data gathering. The unique challenge of an auto configuring database with flexibility to capture all process options is presented.