Search results

Analysis of stability of slopes has been the subject of many research works in the past decades. Prediction of stability of slopes is of great importance in many civil engineering structures including earth dams, retaining walls and trenches. There are several parameters that contribute to the stability of slopes. This paper aims to present a new approach, based on evolutionary polynomial regression (EPR), for analysis of stability of soil and rock slopes.

EPR is a data‐driven method based on evolutionary computing, aimed to search for polynomial structures representing a system. In this technique, a combination of the genetic algorithm and the least square method is used to find feasible structures and the appropriate constants for those structures.

EPR models are developed and validated using results from sets of field data on the stability status of soil and rock slopes. The developed models are used to predict the factor of safety of slopes against failure for conditions not used in the model building process. The results show that the proposed approach is very effective and robust in modelling the behaviour of slopes and provides a unified approach to analysis of slope stability problems. It is also shown that the models can predict various aspects of behaviour of slopes correctly.

In this paper a new evolutionary data mining approach is presented for the analysis of stability of soil and rock slopes. The new approach overcomes the shortcomings of the traditional and artificial neural network‐based methods presented in the literature for the analysis of slopes. EPR provides a viable tool to find a structured representation of the system, which allows the user to gain additional information on how the system performs.

THE general theorems given in Sections 4 and 6 include, from the fundamental point of view, all that is required for the analysis of redundant structures. However, to facilitate practical calculations it is helpful to develop more explicit methods and formulae. To find these is the purpose of this Section.

Basically, connections are used to transfer the force supported by structural members to other parts of the structure. The flush end-plate bolted beam to column connection is one type that has been widely used because of its simplicity in fabrication and rapid site erection. The purpose of this study is to determine the moment-rotation curve, moment of resistance (MR) and mode of failure, and the results were compared with existing results for normal flat web connections.

In this study, the connection modeled was the flush end-plate welded with triangular web profile (TriWP) steel beam section and then bolted to a UKC column flange. The bolted flush end-plate semi-rigid beam to column connection was modeled using finite element software. The specimen was modeled using LUSAS 14.3 finite element software, with dimensions and parameters of the finite element model sizes being 200 × 200 × 49.9 UKC, 200 × 100 × 17.8 UKB and 200 × 100 with a thickness of 20 mm for the endplate.

It can be concluded that the MR obtained from the TriWP steel beam section is different from that of the normal flat web steel beam by 28%. The value of MR for the TriWP beam section is lower than that of the normal flat web beam section, but the moment ultimate is higher by 21% than the normal flat web. Therefore, it can be concluded that the TriWP section can resist more acting force than the normal flat web section and is suitable to be used as a new proposed shape to replace the normal flat web section for a certain steel structure based on the end-plate connection behavior.

As a result, the TriWP section has better performance than the flat web section in resisting MR behavior.

Structural engineering as a part of civil engineering has over 5,000 years of distinguished history, as documented in this paper. An attempt is made in this paper to define structural engineering as it exists at present, then some historical structures are identified.

The advances of structural engineering are discussed in chronological order, encompassing the development of the concept, analysis, the use of innovative construction materials, and construction. The developments which necessitated the change of design philosophies are presented, and the current status of structural engineering is discussed in terms of several specific topics. Opportunities and challenges in the new millennium in structural engineering are then presented in terms of education, service to society, and research.

In the past, structural engineering always met the challenges it faced. It helped to improve our quality of life, and its role in society is not expected to change in the near future.

The paper has provided an over‐view of this important profession – from ancient history to the present day. Based on research over several decades it offers a prediction of the direction in which this profession and the academic research that underpins it is likely to take in the future.

In literature, previous studies have focused on analyzing rienforced concrete (RC) columns with idealized end conditions when subjected to fire. In nature, full fixity or free rotation at column ends is not attained. Such ends may be considered partially restrained in rotation. This paper aims to shed a new light on the effect of different degrees of rotational restraint on the lateral deformation behavior of slender heated RC columns subjected to non-linear strain distributions produced by a time-dependent temperature history.

To find the strain distribution on the cross section, an iterative technique is adopted using Newton–Raphson method. By introducing a reliable calculation procedure, the lateral deformational behavior is expressed using numerical and searching techniques. A methodology is presented to calculate the effective length factor for RC columns at elevated temperature.

The results of the proposed model showed good agreement with available experimental test results. It was also found that the variation of rotational end restraint level has a considerable effect on the lateral deformation behavior of heated slender RC columns. In addition, the effectiveness and the validity of an analytical model should be verified by simultaneously validating the axial and lateral deformations. Moreover, the effective length factor for heated column is higher than that for the corresponding column at ambient temperature.

This paper shows the impact of different boundary conditions on the behavior of heated slender RC columns. It suggests powerful techniques to determine the lateral deflection and the effective length factor at high temperatures.

The design of cantilever pile walls (CPWs) presents several common challenges. These challenges include soil variability, groundwater conditions, complex loading conditions, construction considerations, structural integrity, uncertainties in design parameters and construction and monitoring costs. Accordingly, this paper is to provide a detailed literature review on the design criteria of CPWs, specifically in cohesionless soil. This study aims to present a comprehensive overview of the current state of knowledge in this area.

The paper uses a literature review approach to gather information on the design criteria of CPWs in cohesionless soil. It covers various aspects such as excavation support systems (ESSs), deformation behavior, design criteria, lateral earth pressure calculation theories, load distribution methods and conventional design approaches.

The review identifies and discusses common challenges associated with the design of CPWs in cohesionless soil. It highlights the uncertainties in determining load distribution and the potential for excessive wall deformations. The paper presents various approaches and methodologies proposed by researchers to address these challenges.

The paper contributes to the field of geotechnical engineering by providing a valuable resource for geotechnical engineers and researchers involved in the design and analysis of CPWs in cohesionless soil. It offers insights into the design criteria, challenges and potential solutions specific to CPWs in cohesionless soil, filling a gap in the existing knowledge base. The paper draws attention to the limitations of existing analytical methods that neglect the serviceability limit state and assume rigid plastic soil behavior, highlighting the need for improved design approaches in this context.

The purpose of this paper is to investigate an online monitoring strategy that incorporates fiber Bragg gratings (FBGs) for deformation displacement detection, with the background that slope deformation monitoring is crucial to engineering safety supervision and disaster prevention.

A “beam element” method has been proposed, introduced and experimentally verified in detail. The deformation displacement along a flexible bar can be obtained based on this method, using the distributed strain detected by the FBGs embedded in the bar. A novel sensor structure containing inclinometer casings and a series of connected flexible pipes with FBGs embedded has been proposed. Based on the features of this structure, two FBG deformation sensors have been manufactured and installed into a slope. A matched monitoring station which permits real-time supervision, warning and remote access across the Internet was established and operated.

Displacement data from September 2013 to August 2014 are obtained, which is basically consistent with the practical situation.

The FBG deformation sensors demonstrated a robust and reliable measurement performance, which is promising for real-time disaster warning in slope engineering.

ALL COURSES on strength of materials and theory of structures deal in detail with the methods of finding slopes and deflections for beams carrying a wide variety of forms of loading. Yet frequently in experimental work the subject is unnecessarily restricted to verification of deflections caused by some relatively simple system of concentrated loading.

This paper presents the problems using Laplace Adomian decomposition method (LADM) for investigating the deformation and nonlinear behavior of the large deflection problems on Euler-Bernoulli beam.

The governing equations will be converted to characteristic equations based on the LADM. The validity of the LADM has been confirmed by comparing the numerical results to different methods.

The results of the LADM are found to be better than the results of Adomian decomposition method (ADM), due to this method's rapid convergence and accuracy to obtain the solutions by using fewer iterative terms. LADM are presented for two examples for large deflection problems. The results obtained from example 1 shows the effects of the loading, horizontal parameters and moment parameters. Example 2 demonstrates the point loading and point angle influence on the Euler-Bernoulli beam.

The results of the LADM are found to be better than the results of ADM, due to this method's rapid convergence and accuracy to obtain the solutions by using fewer iterative terms.

This paper proposes a novel approach to impose the Neumann boundary condition for isogeometric analysis (IGA) of Euler–Bernoulli beam with 1-D formulation. The proposed method is for only IGA in which it is difficult to handle the Neumann boundary conditions. The control points of B-spline are equivalent to nodes in finite element method. With 1-D formulation, it is not possible to accommodate multiple degrees of freedom in IGA. This case arises in the analysis of beams. The paper aims to propose a way to work around this issue in a simple way.

Neumann boundary conditions, which are even-order derivatives (example: double derivative) of the primary variable, are inherently satisfied in the weak form. Boundary conditions with an odd number of derivatives (example: slope) are imposed with the introduction of a new penalty matrix.

The proposed method can impose a slope boundary condition for IGA of a beam using 1-D formulation.

From the literature, it can be observed that the beam is formulated in 1-D by considering it as either a rotation-free element or a 2-D formulation by considering shear strain along with the normal strain. The work represents 1-D formulation of a beam while considering the slope boundary condition, which is easy and effective to formulate, compared with the slope boundary conditions reported in previous works.