Lateral deformation behavior of eccentrically loaded slender RC columns with different levels of rotational end restraint at elevated temperatures

Abstract

Purpose

In literature, previous studies have focused on analyzing rienforced concrete (RC) columns with idealized end conditions when subjected to fire. In nature, full fixity or free rotation at column ends is not attained. Such ends may be considered partially restrained in rotation. This paper aims to shed a new light on the effect of different degrees of rotational restraint on the lateral deformation behavior of slender heated RC columns subjected to non-linear strain distributions produced by a time-dependent temperature history.

Design/methodology/approach

To find the strain distribution on the cross section, an iterative technique is adopted using Newton–Raphson method. By introducing a reliable calculation procedure, the lateral deformational behavior is expressed using numerical and searching techniques. A methodology is presented to calculate the effective length factor for RC columns at elevated temperature.

Findings

The results of the proposed model showed good agreement with available experimental test results. It was also found that the variation of rotational end restraint level has a considerable effect on the lateral deformation behavior of heated slender RC columns. In addition, the effectiveness and the validity of an analytical model should be verified by simultaneously validating the axial and lateral deformations. Moreover, the effective length factor for heated column is higher than that for the corresponding column at ambient temperature.

Originality/value

This paper shows the impact of different boundary conditions on the behavior of heated slender RC columns. It suggests powerful techniques to determine the lateral deflection and the effective length factor at high temperatures.

Citation

Mahmoud, K.A. (2021), "Lateral deformation behavior of eccentrically loaded slender RC columns with different levels of rotational end restraint at elevated temperatures", Journal of Structural Fire Engineering, Vol. 12 No. 1, pp. 35-64. https://doi.org/10.1108/JSFE-04-2020-0014