Search results

The wear of an abrasive single-crystal diamond (SCD) grit affects the machining quality of the sapphire wafer. This paper aims to investigate the influence of crystallographic orientation on the wear characteristics of SCD grit scratching on sapphire.

The wear characteristics of two SCD grits (SCD100 and SCD111) with different crystallographic orientations were systematically investigated. The wear mechanism involved in the scratching process was explored. The wear morphology, scratching forces and friction coefficient during the scratching process were measured and analyzed.

The experiment results show that the wear progress of the two SCD grits is obviously different. The wear resistance of SCD111 grit is greater than that of SCD100 grit in normal wear stage. However, the SCD100 grit could remove more sapphire material than SCD111 grit. The SCD grits mainly sustain extrusion stress and shear stress during scratching on sapphire. The crystallographic orientation of SCD grits plays a significant role in the wear progress during scratching on sapphire.

The results of the experimental studies could provide a theoretical foundation for improving the fabrication of abrasive diamond tools.

Mechanical wear is the main wear form of abrasive single crystal diamond (SCD) grit. The mechanical wear of SCD grit has a significant influence on the tool life and machining quality. This paper aims to investigate the influence of grit–workpiece contact form on the mechanical wear characteristics of SCD grit.

Three different grit–workpiece contact forms, which involved point/line/face contact forms, are investigated to reveal the wear mechanism of SCD grit scratching on Ta12W. The wear morphology, wear volume and scratching forces are measured, and the stress models of different contact forms are analyzed.

The results show that mechanical wear mainly occurs in the grit–workpiece contact area and increases gradually from contact area to entire SCD grit. The scratching forces vary with the mechanical wear progress of SCD grits. The SCD grit with point contact form is the most prone to produce wear. The SCD grit with face contact form can remove more material volume than the other two SCD grits, and it is the most wear resistant. The stress state is closely related with the mechanical wear of SCD grit. The contact form has a significant influence on the mechanical wear of SCD grit.

The results of this study can provide a theoretical basis for the fabrication of abrasive tools.

Molecular dynamics is an emerging simulation technique in the field of machining in recent years. Many researchers have tried to simulate different processing methods of various materials with the theory of molecular dynamics (MD), and some preliminary conclusions have been obtained. However, the application of MD simulation is more limited compared with traditional finite element model (FEM) simulation technique due to the complex modeling approach and long computation time. Therefore, more studies on the MD simulations are required to provide a reliable theoretical basis for the nanoscale interpretation of grinding process. This study investigates the crystal structures, dislocations, force, temperature and subsurface damage (SSD) in the grinding of iron-nickel alloy using MD analysis.

In this study the simulation model is established on the basis of the workpiece and single cubic boron nitride (CBN) grit with embedded atom method and Morse potentials describing the forces and energies between different atoms. The effects of grinding parameters on the material microstructure are studied based on the simulation results.

When CBN grit goes through one of the grains, the arrangement of atoms within the grain will be disordered, but other grains will not be easily deformed due to the protection of the grain boundaries. Higher grinding speed and larger cutting depth can cause greater impact of grit on the atoms, and more body-centered cubic (BCC) structures will be destroyed. The dislocations will appear in grain boundaries due to the rearrangement of atoms in grinding. The increase of grinding speed results in the more transformation from BCC to amorphous structures.

This study is aimed to study the grinding of Fe-Ni alloy (maraging steel) with single grit through MD simulation method, and to reveal the microstructure evolution within the affected range of SSD layer in the workpiece. The simulation model of polycrystalline structure of Fe-Ni maraging steel and grinding process of single CBN grit is constructed based on the Voronoi algorithm. The atomic accumulation, transformation of crystal structures, evolution of dislocations as well as the generation of SSD are discussed according to the simulation results.

This paper aims to investigate the effect and mechanism of O atom single doping, Ce and O atoms co-doping on the interfacial microscopic behavior of brazed Ni-Cr/diamond.

Using first-principles calculations, the embedding energy, work of separation, interfacial energy and electronic structures of Ni-Cr-O/diamond and Ni-Cr-O-Ce/diamond interface models were calculated. Then, the effect of Ce and O co-doping was experimentally verified through brazed diamond with CeO₂-added Ni-Cr filler alloy.

The results show that O single-doping reduces the interfacial bonding strength between Ni-Cr filler alloy and diamond but enhances its interfacial stability to some extent. However, the Ce and O co-doping simultaneously enhances the interfacial bonding strength and stability between Ni-Cr filler alloy and diamond. The in-situ formed Ce-O oxide at interface impedes the direct contact between diamond and Ni-Cr filler alloy, which weakens the catalytic effect of Ni element on diamond graphitization. It is experimentally found that the fine rod-shaped Cr₃C₂ and Cr₇C₃ carbides are generated on diamond surface brazed with CeO₂-added Ni-Cr filler alloy. After grinding, the brazed diamond grits, brazed with CeO₂-added Ni-Cr filler alloy, present few fracture and the percentage of intact diamond reaches 67.8%. Compared to pure Ni-Cr filler alloy, the brazed diamond with CeO₂-added Ni-Cr filler alloy exhibit the better wear resistance and the slighter thermal damage.

Using first-principles calculations, the effect of Ce and O atoms co-doping on the brazed diamond with Ni-Cr filler alloy is investigated, and the calculation results are verified experimentally. Through the first-principles calculations, the interface behavior and reaction mechanism between diamond and filler alloy can be well disclosed, and the composition of filler alloy can be optimized, which will be beneficial for synergistically realizing the enhanced interface bonding and reduced thermal damage of brazed diamond.

Seeded Gel (SG) is a ceramic aluminium oxide manufactured by a sintering process. Each abrasive grit consists of sub‐micron size particles which under grinding force are separated from the grit. This keeps SG sharper than conventional abrasives which can dull as flats are worn on the working points. This wearing of small particles also reduces wheel wear rates and increases the G Ratio: volume of metal removed/wheel wear volume. Because sub‐micron particles are worn away, SG holds form and finish better than conventional abrasives especially at higher metal removal rates and forces. Therefore less dressing is needed, wheel life is increased and higher removal rates increase productivity. Moreover, unlike CBN which may require new truing and/or dressing methods, SG products are easily trued with single‐ or multi‐point diamonds or rotary diamond cutters nor do they require stiffer‐than‐usual machines or special equipment.

The granular structure of a grinding wheel determines its performance remarkably when grinding. Nowadays, grinding wheels are man-made porous conglomerates of hard abrasive grains bonded with a binder. As an engineered material, it would be interesting to foresee the behaviour of the wheel, but it is hindered under its complex heterogeneous nature. Recently, some models based on the discrete element method (DEM) have been presented to model the grinding wheel. This paper aims to identify and propose a framework that must comply with such models and to identify new applications for DEM models in grinding.

First, the characteristics of the grinding wheel are described. In this way, the framework of DEM models of a grinding wheel material is developed, reproducing both the granular morphology and stiffness.

The paper asserts a promising future that provides the DEM in the modelling of grinding.

The potential of DEM in grinding is analysed, proposing new applications. It can be used as topography model, which can also model the stiffness. In addition, DEM opens a new interesting research line: the modelling of the grit breakout. It draws up the development of essential dressing and wear models.

Manufacturing industry worldwide is at a turning point in seeking greater competitiveness. High precision manufacturing offers better quality and reliability for conventional products, but also makes possible entirely new products, especially where mechatronics, miniaturization and high performance are important. Describes the main ultra precision machining processes and illustrates how cutting and grinding have been stretched into the nanotechnology regime, especially for advanced ceramics, glasses and opto‐electronic materials.

INCREASING demand for stone products has led to numerous new quarries being opened up and worked all over the world. As a result of this expansion, the variety of stone types available has increased. This can present initial problems when determining the correct diamond and bond specifications for the diamond tools used to cut and drill these materials. It is difficult to make precise judgements without carrying out extensive machining trials to establish the sawability of a given stone type.

This review paper reveals the literature on ultrasonic, chemical-assisted ultrasonic and rotary ultrasonic machining (USM) of glass material. The purpose of this review paper is to understand and describe the working principle, mechanism of material removal, experimental investigation, applications and influence of input parameters on machining characteristics. The literature reveals that the ultrasonic machines have been generally preferred for the glass and brittle work materials. Some other non-traditional machining processes may thermally damage the work surface. Through these USM, neither thermal effects nor residual stresses have been generated on the machined surface.

Various input parameters have the significant role in machine performance characteristics. For the optimization of output response, several input parameters have been critically investigated by the various researcher.

Some advance types of glasses such as polycarbonate bulletproof glass, acrylic heat-resistant glass and glass-clad polycarbonate bulletproof glass still need some further investigation because these materials have vast applications in automobile, aerospace and space industries.

Review paper will be beneficial for industrial application and the various young researcher. Paper reveals the detail literature review on traditional ultrasonic, chemical assisted ultrasonic and rotary USM of glass and glass composite materials.

Fine diamond powders, in some cases composed of particles smaller than one micron, are assuming ever increasing importance, especially as the cost of conventional abrasives rises disproportionately. This article looks at the advancing technology behind natural and synthetic micron diamond powders and their significance in the automated industry of today