Search results

This paper explores how financial technology (FinTech) organisations address poverty-related challenges when providing digital financial services. Employing the conceptual foundation of the liability of poorness (i.e. literacy gaps, a scarcity mindset, intense non-business pressures and a lack of financial slack), this paper explores the innovative strategies that FinTechs use to address these liabilities and promote entrepreneurship.

The paper uses detailed case data collected from three FinTech organisations operating in one South Asian country.

FinTech organisations' innovative strategies reflect a combination of “high touch” (human) vs “low touch” (digital) solutions. All the organisations simplified internal systems or procedures to accommodate customers. The degree to which the three organisations adopted each of the identified strategies shows an emerging typology of FinTechs; that is, innovators with high digital interactions, a mix of digital-human interactions and high human interactions.

The paper develops a typology which categorises FinTech innovative strategies. The typology highlights strategies pro-poor FinTechs use and explains the types of entrepreneurial support innovative organisations provide for their customers. Both the typology and the innovative strategies contribute to enhanced financial inclusion and entrepreneurial promotion amongst the poor.

The originality of the paper comes from its focus on FinTechs' innovative pro-poor strategies. Existing studies typically address the technology-side of innovations. In contrast, this paper combines innovative strategies with the liability of poorness to identify issues associated with financial inclusion.

The purpose of this paper is to design a modified version of the double sampling plan to handle the inspection processes requiring a minimum sample size to assure the median life for the products under the new Weibull–Pareto distribution. The economic design of the proposed plan is also considered to assure the product's lifetime with minimum cost.

The authors have developed an optimization model for obtaining the required plan parameters by solving simultaneously two non-linear inequalities and such inequalities have been formed based on the two points on the operating characteristic curve approach.

The results show that the average sample number, average total inspection and total inspection cost under the proposed plan are smaller than the same of a single sampling plan. This means that the proposed plan will be more efficient than a single sampling plan in reducing inspection effort and cost while providing the desired protection.

The proposed modified double sampling plan designed to assure the median life of the products under the new Weibull–Pareto distribution is not available in the literature. The proposed plan will be very useful in assuring the product median lifetime with minimum sample size as well as minimum cost in all the manufacturing industries.

The purpose of this study is to explore numerical scrutinization of micropolar and Walters-B non-Newtonian fluids motion under the influence of thermal radiation and chemical reaction.

The two fluids micropolar and Walters-B liquid are considered to start flowing from the slot to the stretching sheet. A magnetic field of constant strength is imposed on their flow transversely. The problems on heat and mass transport are set up with thermal, chemical reaction, heat generation, etc. to form partial differential equations. These equations were simplified into a dimensionless form and solved using spectral homotopy analysis method (SHAM). SHAM uses the basic concept of both Chebyshev pseudospectral method and homotopy analysis method to obtain numerical computations of the problem.

The outcomes for encountered flow parameters for temperature, velocity and concentration are presented with the aid of figures. It is observed that both the velocity and angular velocity of micropolar and Walters-B and thermal boundary layers increase with increase in the thermal radiation parameter. The decrease in velocity and decrease in angular velocity occurred are a result of increase in chemical reaction. It is hoped that the present study will enhance the understanding of boundary layer flow of micropolar and Walters-B non-Newtonian fluid under the influences of thermal radiation, thermal conductivity and chemical reaction as applied in various engineering processes.

All results are presented graphically and all physical quantities are computed and tabulated.

The United Nations Convention on the Rights of Persons with Disabilities (2006) recognizes the right of disabled people to access work. Against this legislative backdrop, this study explores the strengths and weaknesses of the Italian system of targeted placement for disabled people, based on Law 68/1999, which delegates to regional authorities the management of the labor market. The examination centers on the perspective of companies, the primary stakeholders in the inclusion of persons with disabilities within organizational structures.

The article discusses the results of focus groups conducted with 28 managers of large, medium and small enterprises in Lombardy (Italy). Qualitative analysis was employed, and the results were structured using a simplified strengths, weaknesses, opportunities and threats (SWOT) analysis, incorporating practical recommendations.

The analysis leads to practical suggestions to improve the entire targeted placement process at the regional level, from selection and accompaniment to evaluation, such as improving the networking of local stakeholders who deal with the inclusion of disabled people, homogeneity of the procedures in different regions, making all employees aware of diversity management, etc. The territorial network and the welfare environment are particularly important in achieving a successful targeted placement and to promote an inclusive corporate culture.

This study is not representative of Italy as a whole, as it remains a qualitative investigation focused on a single region.

This contribution accomplishes an in-depth study of the law of labor inclusion of people with disabilities observed from the point of view of companies, which are still usually reluctant to integrate people with disabilities into their organizations or encounter difficulties in doing so.

In academics and industry, significant efforts have been made to lead planners and control teams in evaluating project performance and control. In this context, numerous control metrics have been devised and put into practice, often with little emphasis on analyzing their underlying concepts. To cover this gap, this research aims to identify and analyze a holistic list of control metrics and their functionalities in the construction industry.

A multi-step analytical approach was conducted to achieve the study’s objectives. First, a holistic list of control metrics and their functionalities in the construction industry was identified. Second, a quantitative analysis based on social network analysis (SNA) was implemented to discover the most important functionalities.

The results revealed that the most important control metrics' functionalities (CMF) could differ depending on the type of metrics (lagging and leading) and levels of control. However, in general, the most significant functionalities include managing project progress and performance, evaluating the look-ahead level’s performance, measuring the reliability and stability of workflow, measuring the make-ready process, constraint management and measuring the quality of construction flow.

This research will assist the project team in getting a comprehensive sensemaking of planning and control systems and their functionalities to plan and control different dynamic aspects of the project.

Every year, millions of consumers around the world become victims of credit card fraud. These individuals have to appeal to their credit card companies to reverse unauthorized charges. This study aims to profile the American consumers’ experience when complaints to their credit card companies about unauthorized charges fail to produce a resolution. Using a large database of consumer complaint filings with the Consumer Financial Protection Bureau (CFPB), the characteristics of these consumer complaints are identified, and the drivers of consumer financial hardship resulting from credit card fraud are determined.

A random sample of consumer complaints about their credit card companies’ perceived mishandling of cases, filed with the CFPB, is used to conduct content analysis. The resulting content analysis categories are used in a predictive model to determine the drivers of consumer hardship.

In nearly one-quarter of all complaint filings, the credit card company had blamed the complainant as the party responsible for the fraudulent charges or refused to open a fraud investigation altogether. Nearly 60% of complaint reports contain expressions of emotional distress and many mention financial hardship. Nearly half of all complainants consider the fraud department operations of their credit card company as lacking in service quality, many reporting inability to reach the department or to receive a returned call. Even after CFPB intermediation, only 15% of complainants receive some form of financial relief from their credit card company. The majority of the complainants report a lack of willingness by the credit card company to reverse unauathorized charges, leaving the complainant financially responsible for them.

This study focused on data collected from consumers. Future research can expand the scope of inquiry by surveying the staff and executives in the fraud investigation departments of credit card companies to determine the norms of fraud investigation used within the industry.

This study sheds light on the financial hardship and emotional pains that consumers victimized by credit card fraud experience in dealing with their credit card companies.

To the best of the authors’ knowledge, this is the first study to empirically examine American consumers’ complaints about the fraud investigation operations of their credit card companies. Using data captured through the complaint filing system of a federal bureau (CFPB), the findings have implications for policymakers, regulators and credit card companies.

This study aims to investigate how companies’ understanding of the business network influences the creation of value in business-to-business relationships. The authors do this by analysing dimensions in actors’ “network pictures” and illustrating how value perception and network understanding influence actors’ mutual effort to create value. Approaching relationship value from the point of actors’ cognitive understanding of their business network has so far been largely overlooked in relationship value research.

This study applies a qualitative case study methodology whereby dyadic data from a well-established business-to-business relationship is collected from 18 company representatives through personal interviews and group interviews supplemented by participant observations and company data.

The findings contribute with new insight into how companies’ understanding of their surrounding network influence (facilitates or limits) relationship value creation. The authors find that companies continuously reflect on changes in their networks and the related changes in partners’ value perceptions. Through value articulations, companies seek to explicitly express their value perception. Value reflections and value articulations create a dynamic process formed not only by the individual actor but also through their relationship and engagement in their network environment. This requires companies to develop their networking capabilities.

This paper presents findings, insights and contributions limited to a case study of a particular business relationship within an industrial setting. Although the findings and contributions are valid and in line with the criteria for rigorous qualitative research, the authors advocate and call for additional studies that investigate relationships value creation and address the interplay between actors’ network understanding and their actions and behaviour. One way to approach this would be to test the four propositions derived and presented as part of the present study.

The findings imply that management needs to be aware not only of the value created and delivered to a specific partner but also of how the partner’s understanding of the wider network will influence the value delivering and capturing process.

This study contributes to the growing literature on relationship value creation by outlining a dynamic process where relationship partners reflect upon and articulate value. Such activities are influenced by the partners’ network understanding and form the basis of the mutual relationship value creation effort. The findings also contribute to the network pictures literature by emphasizing insights into the formation of value perceptions through actors’ understanding of their surrounding networks.

The organizational digital transformation (ODT) in companies presents small and medium-sized enterprises (SMEs) – who remain at the beginning of this transformation – with the challenge of offering digital services based on sensor technologies. Against this backdrop, the present paper identifies ways SMEs can enable digital servitization through sensor technology and defines the possible scope of the organizational transformation process.

Around 21 semi-structured interviews were conducted with experts from different hierarchical levels across the German manufacturing SME ecosystem. Using the Gioia methodology, fields of action were identified by focusing on influencing factors and opportunities for developing these digital services to offer them successfully in the future.

The complexity of existing sensor offerings must be mastered, and employees' (data) understanding of the technology has increased. Knowledge gaps, which mainly relate to technical and organizational capabilities, must be overcome. The potential of sensor technology was considered on an individual, technical and organizational level. To enable the successful implementation of service offerings based on sensor technology, all relevant stakeholders in the ecosystem must network to facilitate shared value creation. This requires standardized technical and procedural adaptations and is an essential prerequisite for data mining.

Based on this study, current problem areas were analyzed, and potentials that create opportunities for offering digital sensor services to manufacturing SMEs were identified. The identified influencing factors form a conceptual framework that supports SMEs' future development of such services in a structured manner.

Because of the advantages of high deposition efficiency and low manufacturing cost compared with other additive technologies, robotic wire arc additive manufacturing (WAAM) technology has been widely applied for fabricating medium- to large-scale metallic components. The additive manufacturing (AM) method is a relatively complex process, which involves the workpiece modeling, conversion of the model file, slicing, path planning and so on. Then the structure is formed by the accumulated weld bead. However, the poor forming accuracy of WAAM usually leads to severe dimensional deviation between the as-built and the predesigned structures. This paper aims to propose a visual sensing technology and deep learning–assisted WAAM method for fabricating metallic structure, to simplify the complex WAAM process and improve the forming accuracy.

Instead of slicing of the workpiece modeling and generating all the welding torch paths in advance of the fabricating process, this method is carried out by adding the feature point regression branch into the Yolov5 algorithm, to detect the feature point from the images of the as-built structure. The coordinates of the feature points of each deposition layer can be calculated automatically. Then the welding torch trajectory for the next deposition layer is generated based on the position of feature point.

The mean average precision score of modified YOLOv5 detector is 99.5%. Two types of overhanging structures have been fabricated by the proposed method. The center contour error between the actual and theoretical is 0.56 and 0.27 mm in width direction, and 0.43 and 0.23 mm in height direction, respectively.

The fabrication of circular overhanging structures without using the complicate slicing strategy, turning table or other extra support verified the possibility of the robotic WAAM system with deep learning technology.

Demonstrate proof-of-concept for conducting NFL Draft trades on a blockchain network using smart contracts.

Using Ethereum smart contracts, the authors model several types of draft trades between teams. An example scenario is used to demonstrate contract interaction and draft results.

The authors show the feasibility of conducting draft-day trades using smart contracts. The entire negotiation process, including side deals, can be conducted digitally.

Further work is required to incorporate the full-scale depth required to integrate the draft trading process into a decentralized user platform and experience.

Cutting time for the trade negotiation process buys decision time for team decision-makers. Gains are also made with accuracy and cost.

Full-scale adoption may find resistance due to the level of fan involvement; the draft has evolved into an interactive experience for both fans and teams.

This research demonstrates the new application of smart contracts in the inter-section of sports management and blockchain technology.