Search results

The study aims to the distribution rule of lubricating oil film of full ceramic ball bearing and improve its performance and life.

The paper established an analysis model based on the fluid–solid conjugate heat transfer theory for full ceramic ball bearings. The distribution of flow, temperature and pressure field of bearings under variable working conditions is analyzed. Meanwhile, the mathematical model of elastohydrodynamic lubrication (EHL) of full ceramic ball bearings is established. The numerical analysis is used to study the influence of variable working conditions on the lubricant film thickness and pressure distribution of bearings. The temperature rise test of full ceramic ball bearing under oil lubrication was carried out to verify the correctness of simulation results.

As the speed increased, the oil volume fraction in full ceramic ball bearing decreased and the surface pressure of rolling element increased. The temperature rise of full ceramic ball bearings increases with increasing speed and load. The lubricant film thickness of full ceramic ball bearing is positively correlated with speed and negatively correlated with load. The pressure of lubricating film is positively correlated with speed and load. The test shows that the higher inner ring speed and radial load, the higher the steady-state temperature rise of full ceramic ball bearing. The test results are in high agreement with simulation results.

Based on the fluid–solid conjugate heat transfer theory and combined with Reynolds equation, lubricating oil film thickness formula, viscosity temperature and viscosity pressure formula. The thermal analysis model and EHL mathematical model of ceramic ball bearings are established. The flow field, temperature field and pressure field distribution of the full ceramic ball bearing are determined. And the thickness and pressure distribution of lubricating oil film in the contact area of full ceramic ball bearing were determined.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2023-0126/

The purpose of this paper is to establish a dynamic analysis model of composite cylindrical roller bearings, investigate the effects of different working conditions on the kinematic characteristics of composite bearings and compare the differences between them and solid roller bearings.

This paper establishes a dynamic analysis model for composite cylindrical roller bearings and proves the correctness of the established model by establishing dynamic vibration experiments and contact theory for composite roller bearings. Comparative analysis was conducted on the effects of coupling changes in rotational speed, load, number of rollers and filling ratio on parameters such as bearing static stiffness, contact stress and vibration acceleration.

The composite roller can enhance the bearing’s operational stability and minimize contact stress, but that a higher filling ratio is going to increase the bearing’s stiffness. The acceleration degree of bearing vibration, the load on the outer raceway nodes and the bearing stability all decrease as inner ring speed rises.

A dynamic calculation model of composite cylindrical roller bearings is established, and the influence of multiparameter coupling changes on bearing vibration and contact is studied, which lays a foundation for the structural improvement of the bearings.

Rotating machinery is a crucial component of large equipment, and detecting faults in it accurately is critical for reliable operation. Although fault diagnosis methods based on deep learning have been significantly developed, the existing methods model spatial and temporal features separately and then weigh them, resulting in the decoupling of spatiotemporal features.

The authors propose a spatiotemporal long short-term memory (ST-LSTM) method for fault diagnosis of rotating machinery. The authors collected vibration signals from real rolling bearing and gearing test rigs for verification.

Through these two experiments, the authors demonstrate that machine learning methods still have advantages on small-scale data sets, but our proposed method exhibits a significant advantage due to the simultaneous modeling of the time domain and space domain. These results indicate the potential of the interactive spatiotemporal modeling method for fault diagnosis of rotating machinery.

The authors propose a ST-LSTM method for fault diagnosis of rotating machinery. The authors collected vibration signals from real rolling bearing and gearing test rigs for verification.

In industry applications, polymer hybrid bearings have become widespread in recent years owing to the lack of lubricant requirements, particularly in areas requiring hygiene. The additive manufacturing method gives significant advantages to have complex machinery parts, and it has become popular in the industry in recent years. However, it has some inherent disadvantages caused by layered deposition/addition of the materials, and the probability of the localized defect is much higher than in the conventional manufacturing methods. This study aims to investigate the effect of the outer race defect on the characteristics of vibration and service lifetime of hybrid polymer ball bearings produced with the stereolithography (SLA) additive manufacturing method.

In this study, polymer bearings’ races were produced with the additive manufacturing SLA method, and the outer race defect was analyzed with measured vibrations.

The results show that the additive manufacturing method suggests a practical solution for producing a polymer hybrid ball bearing. On the other hand, the hybrid three-dimensional-printed bearing, which has an outer race defect, worked for approximately 8 h without any problems under a 1 kg load and a shaft speed of around 1,000 rpm. In addition, when there is a defect in the outer and/or inner race of the ball bearing, the crest factor and kurtosis of the vibration are higher than faultless ball bearing, as expected.

This paper provides valuable information on the lifetime and vibration characteristics of polymer hybrid ball bearing produced by means of additive manufacturing.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2023-0183/

The purpose of this paper is to test and analyze the friction torque of double-row angular contact ball bearings under vacuum or ordinary pressure environment, horizontal or upright installation mode, and different rotational speeds, and to provide theoretical bases for the development of aerospace equipment.

The experiments were carried out to investigate the effects of vacuum or ordinary pressure environment, horizontal or upright installation mode and different rotational speeds on bearing friction torque. To explore the relationship between working conditions and bearing friction torque, firstly, based on the generation source of friction torque, the test principle was determined, a test system was developed and the reliability of data was verified. Secondly, the friction torque of bearing was tested, and the values under various working conditions were obtained. Finally, this paper compared and discussed the test results.

The test results show that the friction torque value of vacuum environment horizontal installation condition is the largest at different rotational speeds, and the rotational speed has the most significant influence on the friction torque.

The friction torque test system of double-row angular contact ball bearing under vacuum environment was designed and built. The influence rules of vacuum or ordinary pressure environment, horizontal or upright installation mode and different rotational speeds on bearing friction torque were obtained.

The peer review history for this article is available at: http://dx.doi.org/10.1108/ILT-08-2023-0259

Monitoring and diagnosis of fault cases for squirrel cage induction motors can be implemented using the multiple coupled circuit model. However, the identification of the associated model parameters for a specific machine is problematic. Up to now, the main options are measurement and test procedures or the use of finite element method analyses. However, these approaches are very costly and not suitable for use in an industrial application. The purpose of this paper is a practical parameter identification based on optimization methods and a comparison of different algorithms for this task.

Population-based metaheuristics are used to determine the parameters for the multiple coupled circuit model. For this purpose, a search space for the required parameters is defined without an elaborate analytical approach. Subsequently, a genetic algorithm, the differential evolution algorithm and particle swarm optimization are tested and compared. The algorithms use the weighted mean squared error (MSE) between the real measured data of stator currents as well as speed and the simulation results of the model as a fitness function.

The results of the parameter identification show that the applied methodology generally works and all three optimization algorithms fulfill the task. The differential evolution algorithm performs best, with a weighted MSE of 2.62, the lowest error after 1,000 simulations. In addition, this algorithm achieves the lowest overall error of all algorithms after only 740 simulations. The determined parameters do not completely match the parameters of the real machine, but still result in a very good reproduction of the dynamic behavior of the induction motor with squirrel cage.

The value of the presented method lies in the application of condition-based maintenance of electric drives in the industry, which is performed based on the multiple coupled circuit model. With a parameterized model, various healthy as well as faulty states can be calculated and thus, in the future, monitoring and diagnosis of faults of the respective motor can be performed. Essential for this, however, are the parameters adapted to the respective machine. With the described method, an automated parameter identification can be realized without great effort as a basis for an intelligent and condition-oriented maintenance.

This paper aims to propose a novel simple and efficient structure for line-start axial-flux permanent magnet (LSAFPM) synchronous motor, especially regarding the permanent magnets (PMs) demagnetization reduction.

At first, a primitive raw scheme of the new structure for the LSAFPM motor is introduced. Considering this raw scheme, the levels of irreversible demagnetization in various regions throughout the entire volume of each PM are evaluated using 3 dimensional (3D) finite elements analysis (3D FEA) in full loading condition during startup until reaching steady state. Based on the results of these analyses, the primitive structural scheme is then modified through segmenting (cutting into four pieces) each PM from where the worst irreversible demagnetization levels occurred.

As will be demonstrated by the results of 3D FEA, the proposed modified structure is not only capable of successful startup and synchronization of the motor but also it considerably reduces the PM demagnetization level. Thus, the performance of the motor is significantly improved.

The demagnetization of PMs is an important effect in PM synchronous motors, which can greatly affect motor performance. Therefore, it is necessary to be considered in the motor design processes. This effect becomes much more significant in the line-start PM motors because the usual high-magnitude startup induction current produces a strong armature-reaction magnetic field, which may cause the PMs to be irreversibly demagnetized. The approach proposed in this paper provides a structural solution to mitigate the PM demagnetization effect and thereby improve the performance of an LSAFPM motor through modifying the structure of the LSAFPM motor according to an FEA-based PM demagnetization analysis. As a considerable contribution, in this analysis, the variation of demagnetization level between different areas inside each PM is computed and is considered as a basis for proposing an appropriate structural modification to mitigate the PM demagnetization effect as much as possible.

Bearing friction moments are important factors that affect the vibrations of rotor systems. The bearing friction moments are related to the dimension parameters, lubrication conditions and manufacturing errors of support bearings. This work studies the effects of the bearing friction moments on the vibrations of rotor systems.

The rotor is separated into several shaft elements for formulating a flexible rotor. The time-varying friction moment (TFM) is affected by the time-varying contact loads. The vibrations of FRS from the TFM and Palmgren's friction moment (PFM) calculation methods are compared. Moreover, the effects of the rotor offset and radial clearance on the frequency-amplitude characteristics of FRS are studied.

The TFM method is more consistent with the actual operation mechanisms. The rotor offset and radial clearance can significantly affect the nonlinear vibrations of FRS. This work provides a new reference and research method for the vibration analysis of rotor systems considering the friction effects.

The elastohydrodynamic lubrication (EHL), elastic hysteresis and differential sliding are considered. A flexible rotor system (FRS) dynamic model considering the TFM is proposed. The vibrations of FRS from the TFM calculation method and empirical calculation formula are compared. The effects of the rotor offset and radial clearance on the frequency–amplitude characteristics of FRS are studied.

Bearings are critical components used to support loads and facilitate motion for rotating and sliding parts of the machinery. Bearing malfunctions can cause catastrophic failures. Hence, failure analysis and endeavors to improve bearing performance are essential discussions for worldwide designers, manufacturers and end users of vital machinery. This study aims to investigate a type of roller bearing from the railway industry with premature failures. The task arises because locomotives’ maintenance and service life quality are vital to railway operations while providing transportation services for the nation. To assist in maintaining the designated locomotives, the present study scrutinizes the causes of failure of heavy-duty roller bearings from locomotive bogie axleboxes.

It is intended to inspect this bearing service life and statistically scrutinize its design parameters to reveal the failures’ shortcomings and origins. The significant measures include examinations of their failures’ primary and vital factors by comparing them with a real-life service history of 16 roller bearings of the same type. The bearings come from the axleboxes of a locomotive bogie with an axle load of 20 tons. The bearing loads are estimated using the EN13104 standard document and confirmed by the finite element method using ABAQUS engineering software. To validate the finite element modeling results, the bearings’ stress analysis is performed using the Hertzian contact theory that demonstrated perfect conformity. The said methods are also used to search for the areas susceptible to failures in these bearings. With the inclusion and exploitation of the bearing maintenance conditions and the logbook recordings of the locomotives for the past seven years, the critical cause for this type of bearing’s failures is surveyed and discussed.

With the inclusion and exploitation of the bearing maintenance conditions and the logbook recordings of the locomotives for the past seven years, the critical cause for this type of bearing’s failures is surveyed and discussed. As a crucial result, it is found that deprived maintenance and inadequate lubrication are the root causes of the loss of the selected bearings.

For the designated locomotives, the origins of the heavy-duty roller bearing failures and its design shortcomings are revealed by examining and comparing them with a real-life service history of many of the same types of bearings. The novelty of the research is in using the combination of the methods mentioned above and its decent outcome.

This paper aims to propose a semianalytical model of a squirrel-cage induction machine (SCIM), considering local magnetic saturation and eddy-currents induced in the rotor bars.

The regions of the rotor and stator are divided into elementary subdomains (E-SDs) characterized by general solutions at the first harmonic of the magneto-harmonic Maxwell’s equations. These E-SDs are connected in both directions (i.e., along the r- and θ-edges).

The calculation of the magnetic field has been validated for various values of slip and iron permeability. All electromagnetic quantities were compared with those obtained using a two-dimensional finite-element method. The semianalytical results are satisfactory compared with the numerical results, considering both the amplitude and waveform.

Expansion of the recent analytical model (E-SD technique) for the full prediction of the magnetic field in SCIMs, considering the local saturation effect and the eddy-currents induced in the rotor bars.