Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This paper aims to investigate the formation of an inter-organizational collaboration network that made it possible to repair 2,516 mechanical respirators that were inoperative in Brazil during the first wave of the COVID-19 pandemic.

A qualitative approach was used in a single case study with semi-structured interviews. The interviewee selection process was non-probabilistic through snowball sampling.

The results suggest that society, through different social groups with their different roles, can organize itself quickly through the formation of collaborative networks, and this organizational configuration can be an alternative for facing crises where actions isolated would be insufficient or slow to urgently address complex situations.

This paper aims to (1) demonstrate that society, through different social groups with their different roles, can organize itself quickly through the formation of collaborative networks; (2) favor the understanding and dynamics of the formation of a network; and (3) contribute to a possible replication of this initiative in future contexts.

The case portrays an unprecedented formation of a collaboration network involving more than 144 organizations that mobilized quickly in a complex context of a pandemic and that generated remarkable results through the reintroduction of equipment that were responsible for the preservation of thousands of lives during the year from 2020.

This paper aims to answer the questions of what clothing practices related to sustainable fashion can be observed in young consumers' daily lives in Finland’s capital region and what prevents their further proliferation.

This is qualitative research that draws from 22 semi-structured interviews with high school students in the capital area of Finland. The data were analyzed with the use of thematic analysis, a flexible method of data analysis that allows for the extraction of categories from both theoretical concepts and data.

This paper contributes to studies of young people’s consumption with the practice theory approach, putting forward the category of following sustainable fashion as an integrative practice. The three-element model of the practice theory allows answering the question of challenges that prevent the practice from shaping. The paper further advances this approach by identifying a list of context-specific dispersed practices incorporated into sustainable fashion.

The study suggests practical ways of improving clothing consumption based on the practice theory approach and findings from empirical research. Sustainable practices require competences, knowledge and skills that the school, as an institution working closely with high school students, could help develop.

The study contributes to the current studies of sustainability and youth culture of consumption with a practice theory approach and findings, related to a particular context of a country from Northern Europe.

The purpose of this paper is to investigate how the pandemic affects tenants’ response to their lease obligations. This paper commences with examining the adopted tenant selection criteria during the COVID-19 pandemic. Then, this paper statistically tests if there is a relationship between selection criteria and response on whether the pandemic has effects or not. Then, this paper investigates the specific areas of impact on tenants’ ability to adequately keep to lease agreements in the Nigerian rental market. Finally, this paper proceeds to confirm if there is a relationship between selection criteria and the aspects of tenants’ deficiencies in rental obligations because of COVID-19.

Survey data, backed with interviews, is elicited from practicing estate surveyors and valuers and licensed property managers in Lagos, the largest property market in Nigeria and sub-Sahara Africa. Policy solutions and implications were solicited from personnel at the ministry of housing and senior professionals in the property sector. Data were analyzed using descriptive statistics, factor analysis and computer-aided qualitative data analysis, Atlas.ti.

Tenant’s health status is now accorded a priority together with others. Numbers of tenants are challenged with keeping to the prompt-rent-payment rule. Other areas of slight breaches included livestock rearing, subletting, alteration and repair covenants. Except for tenant reputation and tenant family size, there was no significant relationship between tenant’s health status consideration and the COVID-19 effect on tenant non-compliance with lease obligation. Tenants’ non-compliance with tenancy obligations has a connection with the tenants’ affordability, reputation, ability to sign an undertaking and health conditions during the pandemic. This paper recommends rental housing policy review.

It is recommended that the rental policy should be reviewed to give room for rental allowance or palliatives, private rental market regulation, exploration of the national housing fund and, if possible, social housing adoption policy in Nigeria.

This paper draws policymakers’ attention to the need to prepare for the future safety net that caters to citizenry welfare in challenging times.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Even if there is a wealth of research highlighting the key role of values and cultural significance for heritage management and, defining specific interventions on built heritage, seldom the relation to their leading values and values hierarchy have been researched. How do values and interventions relate? What values trigger most and least interventions on heritage? How do these values relate and characterize interventions? And what are the values hierarchy that make the interventions on built heritage differ?

This paper conducts a systematic content analysis of 69 international doctrinal documents – mainly adopted by Council of Europe, UNESCO, and ICOMOS, during 1877 and 2021. The main aim is to reveal and compare the intervention concepts and their definitions, in relation to values. The intensity of the relationship between intervention concepts and values is determined based on the frequency of mentioned values per intervention.

There were three key findings. First, historic, social, and aesthetical values were the most referenced values in international doctrinal documents. Second, while intervention concepts revealed similar definitions and shared common leading values, their secondary values and values hierarchy, e.g. aesthetical or social values, are the ones influencing the variation on their definitions. Third, certain values show contradictory roles in the same intervention concepts from different documents, e.g. political and age values.

This paper explores a novel comparison between different interventions concepts and definitions, and the role of values. The results can contribute to support further research and practice on clarifying the identified differences.

This article argues that truth recovery practices that take place against the backdrop of ongoing settler colonial erasure, as is the case when considering Zionist colonial violence in Palestine, must focus on combating state-sponsored attempts at erasure, rather than solely providing a platform for the expression of settler guilt.

The article analyses existing literature on truth recovery practices that take place in Palestine, including the work of a variety of local NGOs engaged in such praxis, with a view to considering how this form of transitional justice has germinated incrementally in the space. Critical reflection on the work of a variety of grassroots NGOs is situated alongside other forms of transitional justice intervention.

The article argues that in the context of enduring settler colonialism, the truth regarding past Zionist atrocities in historic Palestine must avoid being curated in the present day in such a way as to allow for damage limitation rather than the platforming of conversations around meaningful repair. Truth recovery for recovery's sake serves only to reinforce the settler colonial status quo rather than properly agitate for a full decolonisation, one that demands and facilitates indigenous Palestinian return.

The article challenges prevailing notions of the role of truth recovery practices in spaces of enduring settler colonial value. It makes clear that the role of truth recovery interventions in sites where colonial violence endures must be to actively and meaningfully support activities that reinforce native identity, history and presence on the land. Moreover, by reference to existing grassroots attempts at truth recovery in Palestine, the article provides an original and clear argument that states it is simply not enough to platform the revelation of uncomfortable truths or to provide opportunities for settler violence of the past to be “confessed” in public if it is disassociated from challenging the present-day structures of ongoing oppression.

This paper aims to propose a simulation-based performance evaluation model for the drone-based delivery of aid items to disaster-affected areas. The objective of the model is to perform analytical studies, evaluate the performance of drone delivery systems for humanitarian logistics and can support the decision-making on the operational design of the system – on where to locate drone take-off points and on assignment and scheduling of delivery tasks to drones.

This simulation model captures the dynamics and variabilities of the drone-based delivery system, including demand rates, location of demand points, time-dependent parameters and possible failures of drones’ operations. An optimization model integrated with the simulation system can update the optimality of drones’ schedules and delivery assignments.

An extensive set of experiments was performed to evaluate alternative strategies to demonstrate the effectiveness for the proposed optimization/simulation system. In the first set of experiments, the authors use the simulation-based evaluation tool for a case study for Central Florida. The goal of this set of experiments is to show how the proposed system can be used for decision-making and decision-support. The second set of experiments presents a series of numerical studies for a set of randomly generated instances.

The goal is to develop a simulation system that can allow one to evaluate performance of drone-based delivery systems, accounting for the uncertainties through simulations of real-life drone delivery flights. The proposed simulation model captures the variations in different system parameters, including interval of updating the system after receiving new information, demand parameters: the demand rate and their spatial distribution (i.e. their locations), service time parameters: travel times, setup and loading times, payload drop-off times and repair times and drone energy level: battery’s energy is impacted and requires battery change/recharging while flying.

New service businesses carry opportunities for industrial companies. The different cost management and management control implications of those service businesses deserve attention, which is a widely under-researched area in management accounting and control literature. Digital twins could hold potential in unveiling and supporting those new service business opportunities, as a unique approach of this paper. Thus, the purpose of this paper is to examine the possibility and potential for creating a digital twin of a service, especially to unveil the management accounting and control implications of the digital twin in developing new service businesses.

This paper investigates the potential of a digital twin in unveiling cost and control implications of new service businesses by examining the characteristics of a digital twin in the service business development context. The paper use an in-depth interventionist case study, where the designed animations illustrate the possibilities of a digital twin of a service. The animations showing the service process characteristics were first used as a communication tool and eventually those animations were actively used in customer cases for different purposes. This motivated the idea for examining the implications of such animations representing a digital twin of a service.

The paper provides empirical insights regarding the potential for developing and using a digital twin of a service for different cost management and management control purposes. The digital twin of a service may include all main details of a new service offering, simulating the functionality of a service, hence making the performance and the implications of the new service concept clear for all the stakeholders. The digital twin of the service enables defining the processes, setting targets and helps communication about the value generation. Thus, they represent a significant toolkit for the management accounting and control function of the manufacturers.

This paper is among the first attempts to understand the digital twin of the service. The paper is unique in providing financial and control implications of digital twins also in the context of service business development. The in-depth interventionist approach enabled an exceptional exploration process on the subject. The article paves the way toward further research on managing the digital twins of services in the future.

This study examines the osteoconductive and healing capabilities of locally implanted synthetic hydroxyapatite (sHAp) derived from eggshells in the central incisor sockets of rats.

Toxicity experiments were conducted in vitro and in vivo, to testify the safety dosage of sHAp. Around 24 mature male Sprague–Dawley (SD) rats had their upper central incisors extracted. The rats were placed into three groups of eight rats each: Group 1: the sockets of extracted central incisors were left unfilled (control), Group 2: filled up with commercially available hydroxyapatite (HAp) and Group 3: implanted with sHAp locally retrieved from eggshells. After extraction, four rats from each group were sacrificed at 2nd and 4th weeks. Maxillary tissue sections were obtained and stained with hematoxylin and eosin (H&E) and Masson’s trichome (MT) staining. Anti-osteocalcin (OCN) and proliferating cell nuclear antigen (PCNA) were used primary antibodies for immunohistochemistry (IHC) special labeling.

The results showed that the locally implanted sHAp was non-toxic and safe in cell lines (human osteoblast and fibroblast) and animals. Histological analysis of H&E, MT and IHC showed that the sockets treated with locally implanted sHAp from eggshells were filled with new bone tissue of comparable thickness to other groups.

This unique technique uses locally implanted eggshell-derived sHAp with osteoconductive characteristics. In an in vivo model, sHAps increased OCN and PCNA expression to improve bone repair.