Search results

A higher-order Reissner-Mindlin plate element method is presented based on the framework of assumed stress quasi-conforming method and Hellinger-Reissner variational principle. A novel six-node triangular plate element is proposed by utilizing this method for the static and free vibration analysis of Reissner-Mindlin plates.

First, the initial assumed stress field is derived by using the fundamental analytical solutions which satisfy all governing equations. Then the stress matrix is treated as the weighted function to weaken the strain-displacement equations after the strains are derived by using the constitutive equations. Finally, the arbitrary order Timoshenko beam function is adopted as the string-net functions along each side of the element for strain integration.

The proposed element can pass patch test and is free from shear locking and spurious zero energy modes. Numerical tests show that the element can give high-accurate solutions, good convergence and is a good competitor to other models.

This work gives new formulations to develop high-order Reissner-Mindlin plate element, and the new strategy exhibits advantages of both analytical and discrete methods.

An adaptive mesh refinement procedure is used in static plate bending finite element analysis to study the edge effects in Mindlin—Reissner plates.

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

A simple shape-free high-order hybrid displacement function element method is presented for precise bending analyses of Mindlin–Reissner plates. Three distortion-resistant and locking-free eight-node plate elements are proposed by utilizing this method.

This method is based on the principle of minimum complementary energy, in which the trial functions for resultant fields are derived from two displacement functions, F and f, and satisfy all governing equations. Meanwhile, the element boundary displacements are determined by the locking-free arbitrary order Timoshenko’s beam functions. Then, three locking-free eight-node, 24-DOF quadrilateral plate-bending elements are formulated: HDF-P8-23β for general cases, HDF-P8-SS1 for edge effects along soft simply supported (SS1) boundary and HDF-P8-FREE for edge effects along free boundary.

The proposed elements can pass all patch tests, exhibit excellent convergence and possess superior precision when compared to all other existing eight-node models, and can still provide good and stable results even when extremely coarse and distorted meshes are used. They can also effectively solve the edge effect by accurately capturing the peak value and the dramatical variations of resultants near the SS1 and free boundaries. The proposed eight-node models possess potential in engineering applications and can be easily integrated into commercial software.

This work presents a new scheme, which can take the advantages of both analytical and discrete methods, to develop high-order mesh distortion-resistant Mindlin–Reissner plate-bending elements.

This paper aims to develop a new isogeometric boundary element formulation based on non-uniform rational basis splines (NURBS) curves for solving Reissner’s shear-deformable plates.

The generalized displacements and tractions along the problem boundary are approximated as NURBS curves having the same rational B-spline basis functions used to describe the geometrical boundary of the problem. The source points positions are determined over the problem boundary by the well-known Greville abscissae definition. The singular integrals are accurately evaluated using the singularity subtraction technique.

Numerical examples are solved to demonstrate the validity and the accuracy of the developed formulation.

This formulation is considered to preserve the exact geometry of the problem and to reduce or cancel mesh generation time by using NURBS curves employed in computer aided designs as a tool for isogeometric analysis. The present formulation extends such curves to be implemented as a stress analysis tool.

‘Shear‐constraints’ can be used to produce efficient Mindlin/Reissner or ‘discrete Kirchhoff’ bending elements. The paper shows that ‘selective shear‐constraints’ can be used to produce an effective formulation for folded‐plated structures.

A method for controlling the quality of finite element analyses for plate structures is proposed herein. It is based on the concept of error in the constitutive relation as well as on associated techniques for constructing admissible displacement‐stress fields with respect to a reference model. In this study, the chosen model is either Reissner‐Mindlin’s or Kirchhoff‐Love’s model. The finite element used is the DKT element; these error estimators allow us to determine that this element converges for Kirchhoff‐Love’s model. Once these error estimators have been identified, techniques of adaptive meshing developed in 2D are applied and several examples are presented.

This paper aims to describe the formulation of a new finite element by assuming the strain field rather than the displacement field and by using the Reissner–Mindlin plate theory for the free vibration analysis of bending plates. This quadrilateral element consists of four-nodes and twelve degrees of freedom. The suggested element is based on assumed functions of the strain field that satisfy the compatibility equation.

After the proposition of the new element, several numerical tests for plates with regular and distorted meshes are presented to assess the performance of the new element. In addition, a parametric study is carried out to analyze the effects of biaxial loads on the natural frequencies of square plates with various boundary conditions. Detailed discussions are proposed after each benchmark problem.

The formulated element has verified the shear locking test and passes the patch test. The obtained results from the developed element show an excellent accuracy and fast convergence, and the natural frequencies are in excellent agreement when compared with analytical and other available numerical solutions.

The present element is simple in its formulation and has been proven to be applicable to thin or thick plate situations with sufficient accuracy. This element with full integration is free from shear locking, however, the numerical results provided by the standard four-node plate element R4 element show locking phenomena in thin plates. In addition to these features, the imposition of the compatibility conditions and the rigid body modes allow obtaining a finite element with higher-order terms for displacements field, which can increase the performance of the finite elements.

A bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view is given. The bibliography at the end of the paper contains 1,726 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1996‐1999.

A composite triangular equilibrium element for modelling thin plate behaviour is investigated when shear deformation, according to Reissner's theory, is included in addition to bending deformation. The element flexibility matrix is formed as the sum of two component matrices containing the contributions from piecewise linear moment fields and piecewise constant shear fields separately. Properties of the shear component matrix, including its rank, are determined, and the influence of load basis on the pattern of this matrix is studied. The way these properties affect the condition of a flexibility matrix is investigated when the element size/thickness ratio varies, and particularly when this ratio tends towards zero. Load bases are suggested which could avoid certain problems of ill‐conditioning. Condition parameters are evaluated for an equilateral element. Finally, the application of kinematic boundary conditions to the equilibrium is considered.