Search results

Aluminum alloy is considered an ideal material in aerospace, automobile and other fields because of its lightweight, high specific strength and easy processing. However, low hardness and strength of the surface of aluminum alloys are the main factors that limit their applications. The purpose of this study is to obtain a composite coating with high hardness and lubricating properties by applying GO–PVA over MAO coating.

A pulsed bipolar power supply was used as power supply to prepare the micro-arc oxidation (MAO) coating on 6061 aluminum sample. Then a graphene oxide-polyvinyl alcohol (GO–PVA) composite coating was prepared on MAO coating for subsequent experiments. Samples were characterized by Fourier infrared spectroscopy, X-ray diffraction, Raman spectroscopy and thermogravimetric analysis. The friction test is carried out by the relative movement of the copper ball and the aluminum disk on the friction tester.

Results showed that the friction coefficient of MAO samples was reduced by 80% after treated with GO–PVA composite film.

This research has made a certain contribution to the surface hardness and tribological issues involved in the lightweight design of aluminum alloys.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0427/

Due to the environmental issues caused by petroleum lubricants used in lubrication, the concept of creating various bio-lubricants requires research globally. Thus, this study aims to develop, characterize and test the base ficus carica oil (fig oil) for its ethylene vinyl acetate copolymer (EVA) and sodium dodecylbenzene sulfonate (SDBS) content.

The sample characterization was done using the Fourier transmission infrared spectrum, whereas the morphologies of the EVA, SDBS particles and lubricated surfaces were carried out under scanning electron microscope equipment. To ensure the homogeneity of the solution (base oil and additives), the formulations were subjected to the sonication process. The anti-friction and anti-wear properties of EVA and SDBS particles as lubricant additives were investigated using a ball on a flat high-frequency reciprocating rig tribo-tester.

According to the findings, the base oil’s anti-friction and anti-wear capabilities can be greatly enhanced by the additions. revealed that the best results were obtained when 1.2% EVA + 2% SDBS was applied for the examination of wear (597.8 µm) and friction coefficient (0.106). Commercial references were used, nevertheless, and the results were excellent. This is because the particles in the contact area during lubrication have strong solubility and quickly penetrate the contact zone. The lubricating mechanisms were explained by a tribological model of the EVA + SDBS and SDBS particles.

The coefficient of friction and wear reduction caused by the use of the additives will certainly enhance system performance and protect the machine components from excessive wear that could cause damage or failure.

The originality and uniqueness of this work are officially affirmed by the authors. The authors’ autonomous and original contribution to the development of sustainable lubrication is represented in this work. To the best of the authors’ knowledge, no other study has been published or made publicly available that duplicates the precise scope and goals of our research, and this conclusion is based on a thorough literature assessment.

This paper aims to solve the problems molybdenum disulfide (MoS₂) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.

MoS₂/C₆₀ nanocomposites were prepared by synthesizing molybdenum disulfide (MoS₂) nanosheets on the surface of hydrochloric acid-activated fullerenes (C₆₀) by in situ hydrothermal method. The composition, structure and morphology of MoS₂/C₆₀ nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.

MoS₂/C₆₀ nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS₂/C₆₀ was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.

MoS₂/C₆₀ composite nanoparticles were prepared by in-situ formation of MoS₂ nanosheets on the surface of C₆₀ activated by HCl through hydrothermal method and were used as potential lubricating oil additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/

Wire-arc-based additive manufacturing (WAAM) is a promising technology for the efficient and economical fabrication of medium-large components. However, the anisotropic behavior of the multilayered WAAM-fabricated components remains a challenging problem.

The purpose of this paper is to conduct a comprehensive study of the grain morphology, crystallographic orientation and texture in three regions of the WAAM printed component. Furthermore, the interdependence of the grain morphology in different regions of the fabricated component with their mechanical and tribological properties was established.

The electron back-scattered diffraction analysis of the top and bottom regions revealed fine recrystallized grains, whereas the middle regions acquired columnar grains with an average size of approximately 8.980 µm. The analysis revealed a higher misorientation angle and an intense crystallographic texture in the upper and lower regions. The investigations found a higher microhardness value of 168.93 ± 1.71 HV with superior wear resistance in the bottom region. The quantitative evaluation of the residual stress detected higher compressive stress in the upper regions. Evidence for comparable ultimate tensile strength and greater elongation (%) compared to its wrought counterpart has been observed.

The study found a good correlation between the grain morphology in different regions of the WAAM-fabricated component and their mechanical and wear properties. The Hall–Petch relationship also established good agreement between the grain morphology and tensile test results. Improved ductility compared to its wrought counterpart was observed. The anisotropy exists with improved mechanical properties along the longitudinal direction. Moreover, cylindrical components have superior tribological properties compared with cuboidal components.

The purpose of this study is to solve the issues of time-consuming and complicated computation of traditional measures, as well as the underutilization of two-dimensional (2D) phase-trajectory projection matrix, so a new set of features were proposed based on the projection of attractors trajectory to characterize the friction-induced attractors and to reveal the tribological behavior during the running-in process.

The frictional running-in experiments were conducted by sliding a ball against a static disk, and the friction coefficient was collected to reconstruct the friction-induced attractors. The projection of the attractors in 2D subspace was then mapped and the distribution of phase points was adapted to conduct the feature extraction.

The evolution of the proposed moment measures could be described as “initial rapid decrease/increase- midterm gradual decrease/increase- finally stable,” which could effectively reveal the convergence degree of the friction-induced attractors. Moreover, the measures could also describe the relative position of the attractors in phase–space domain, which reveal the amplitude evolution of signals to some extent.

The proposed measures could reveal the evolution of tribological behaviors during the running-in process and meet the more precise real-time running-in status identification.

This study aims to identify the primary research areas of modern methods of construction (MMC) along with its current trends and developments.

A combination of bibliometric and qualitative analysis is adopted to examine 1,957 MMC articles in the Scopus database. With the support of CiteSpace 6.1.R6, the clusters, leading authors, journals, institutions and countries in the field of MMC are examined.

Offsite construction, inter-modular connections, augmenting output, prefabricated concrete beams and earthquake-resilient prefabricated beam–column steel joints are the top five research areas in MMC. Among them, offsite construction and inter-modular connections are significantly focused, with many research articles. The potential for collaboration, among prominent authors such as Wang, J., Liu, Y. and Wang, Y., explains the recent rapid growth of the MMC field of research. With a total of 225 articles, Engineering Structures is the journal that has published the most articles on MMC. China is the leading country in this field, and the Ministry of Education China is the top institution in MMC.

The findings of this study bear significant implications for stakeholders in academia and industry alike. In academia, these insights allow researchers to identify research gaps and foster collaboration, steering efforts toward innovative and impactful outcomes. For industries using MMC practices, the clarity provided on MMC techniques facilitates the efficient adoption of best practices, thereby promoting collaboration, innovation and global problem-solving within the construction field.

This study aims to capture how the association between a multichannel relational communication strategy (MRCS) and customer performance is contingent upon such customer performance (low- versus high-performance customers) and to reconcile past contradictory results in this marketing-related topic. To this end, the authors propose and validate the method of quantile regression as an unconventional, yet effective, means to proceed to that reconciliation.

This study collected data from 4,934 customers of a private pension fund firm and accounted for both firm- and customer-initiated relational communication channels (RCCs) and for customer lifetime value (CLV). This study estimated a generalized linear model and then a quantile regression model was used to account for customer performance heterogeneity.

This study finds that specific RCCs present different levels of association with performance for low- versus high-performance customers, where outcome customer performance is the dependent variable. For example, the relation between firm-initiated communication (FIC) and performance is stronger for low-CLV customers, whereas the relation between customer-initiated communication (CIC) and performance is increasingly stronger for high-CLV customers but not for low-CLV ones. This study also finds that combining different forms of FIC can result in a negative association with customer performance, especially for low-CLV customers.

The authors tested the conceptual model in one single firm in the specific context of financial services and with cross-sectional data, so there should be caution when extrapolating this study’s findings.

This study offers nuanced and precise managerial insights on recommended resource allocation along with relational communication efforts, showing how managers can benefit from adopting a differentiated-customer performance approach when designing their MRCS.

This study provides an overview of the state of the art of MRCS, proposes a contingency analysis of the relationship between MRCS and performance based on customer performance heterogeneity and suggests the quantile method to perform such analysis and help reconcile past contradictory findings. This study shows how the association between RCCs and CLV varies across the conditional quantiles of the distribution of customer performance. This study also addresses a recent call for a more holistic perspective on the relationships between independent and dependent variables.

The rock drill’s drill tail experiences high-frequency fretting simultaneously in the rotational and axial directions. Due to the complex working characteristics and the low viscosity of the water medium, the pure water seal is susceptible to damage and failure. The purpose of this paper is to enhance the water seal’s performance.

The Y-shaped seal ring is modeled and simulated using orthogonal testing. Through analysis of the impact of various seal section parameters on sealing performance, the maximum contact stress and maximum Von Mises stress are selected as indicators of sealing effectiveness.

The maximum contact stress is proportional to lip thickness and chamfer length but inversely proportional to lip length. Meanwhile, the maximum Von Mises stress is directly influenced by lip depth and the included angle of the lip and drill tail but is inversely proportional to the lip thickness. The enhanced Y-shaped water seal sees reductions of 15% and 45% in maximum contact stress and maximum Von Mises stress, respectively.

This paper used analytical method and model that is helpful for design of the water seal’s structure in complex working characteristics and the low viscosity of the water medium.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0366/

Supervisor consultation is conducive to promoting employee voice. This research examines an underlying mediating mechanism and a boundary condition that strengthens the influence of supervisor consultation.

Two-wave survey data were collected from 302 full-time employees. Path analysis was adopted to test the hypotheses.

Supervisor consultation is positively related to employee voice. Employee felt obligation for constructive change (FOCC) serves as a mediating mechanism. Supervisor consultation is more positively related to employee FOCC and subsequent voice when managerial openness is higher than lower.

This study highlights the incremental mediating effect of FOCC beyond that of two alternative mediators between supervisor consultation and employee voice and the moderating role of managerial openness in affecting the influence of supervisor consultation.

This research aims to investigate the relationship between employer branding and its antecedent organisational culture within the context of the private banking sector. The study also investigates the relationship between employer branding and employee brand equity as a consequential construct. Additionally, the mediating role of trust and the moderating role of gender in the relationship between employer branding and employee brand equity has been examined.

The present study’s findings result from data analysis collected from a sample of 454 employees working in private banks in India. The data analysis was conducted utilising the structural equation modelling technique with the assistance of analysis of moment structures (AMOS) software.

The study’s findings indicate that supportive and bureaucratic (formal) culture in private banks exhibit a significant relationship with employer branding. However, the relationship between innovative culture and employer branding was found to be insignificant. The research also reveals a significant positive association between employer branding and employee brand equity variables: brand consistent behaviour, brand endorsement and brand allegiance. Further, the study highlights the mediating role of employee trust in management in the relationship between employer branding and employee brand equity. Examining demographic variables suggests that gender moderates the relationship between employer branding and employee brand equity.

The originality of this study lies in its exploration of the critical role of organisational culture variables in shaping employer branding within the context of private banks. The findings highlight that cultivating supportive and bureaucratic cultures can effectively enhance the employer branding of private banks. The study emphasises the outcomes of employer branding initiatives, signifying that they contribute to developing brand equity among employees. This leads to long-term employee commitment and advocacy towards the organisation, as employees become brand advocates for the bank with which they are affiliated. The study contributes to a better understanding of the relationship between organisational culture, employer branding and employee brand equity, providing valuable implications for the private banking sector aiming to reinforce their employer brand and increase employee engagement.