Search results

Green roofs are strategies for the ecological intensification of cities and a measure of meeting some of the sustainable development goals (SDGs). They have widely been adopted as an adaptation strategy against an urban heat island (UHI). However, they are conventionally soil-based making it difficult and expensive to adopt as a strategy for greening existing buildings (GEB). This paper, therefore, develops a novel green roof system using climbers for thermal-radiative performance. The paper explores the vitality of climbing species as a nature-based strategy for GEB, and for the ecological improvement of the predominantly used cool roofs in sub-Saharan Africa (SSA).

Simulation for the same building Kejetia Central Market (KCM) Redevelopment; the existing aluminium roof (AL), soil-based extensive green roof (GR1) and the proposed green roof using climbing plants (GR2) were performed using ENVI-met. The AL and GR1 were developed as reference models to evaluate and compare thermal-radiative performance of the conceptual model (GR2). The long wave radiation emission (Q_lw), mean radiant temperature (MRT) and outdoor air temperature (T_a) of all three roofing systems were simulated under clear sky conditions to assess the performance and plant vitality considering water access, leaf temperature (T_f) and latent heat flux (LE₀) of GR1 and GR2.

There was no short wave radiation (Q_sw) absorption at the GR2 substrate since the climbers have no underlying soil mass, recording daily mean average Q_lw emission of 435.17 Wm⁻². The soil of GR1, however, absorbed Q_sw of 390.11 Wm⁻² and a Q_lw emission of 16.20 wm⁻² higher than the GR2. The AL recorded the lowest Q_lw value of 75.43 Wm⁻². Also, the stomatal resistance (r_s) was higher in GR1 while GR2 recorded a higher average mean transpiration flux of 0.03 g/sm³. This indicates a higher chance of survival of the climbers. The T_a of GR2 recording 0.45°C lower than the GR1 could be a good UHI adaptation strategy.

No previous research on climbers for green roof systems was found for comparison, so the KCM project provided a unique confluence of dynamic events including the opportunity for block-scale impact assessment of the proposed GEB strategy. Notwithstanding, the single case study allowed a focussed exploration of the novel theory of redefining green roof systems with climbers. Moreover, the simulation was computationally expensive, and engaging multiple case studies were found to be overly exhaustive to arrive at the same meaningful conclusion. As a novelty, therefore, this research provides an alternative theory to the soil-based green roof phenomenon.

The thermal-radiative performance of green roofs could be improved with the use of climbers. The reduction of the intensity of UHI would lead to improved thermal comfort and building energy savings. Also, very little dependence on the volume of soil would require little structural load consideration thereby leading not only to cheaper green roof construction but their higher demand, adoption and implementation in SSA and other low-income economies of the global south.

The reduction of the consumption of topsoil and water for irrigation could avoid the negative environmental impacts of land degradation and pollution which have a deleterious impact on human health. This fulfils SDG 12 which seeks to ensure responsible consumption of products. This requires the need to advance the research for improvement and training of local built environment practitioners with new skills for installation to ensure social inclusiveness in the combat against the intractable forces of negative climate impacts.

Climbers are mostly known for green walls, but their innovative use for green roof systems has not been attempted and adopted; it could present a cost-effective strategy for the GEB. The proposed green roof system with climbers apart from becoming a successful strategy for UHI adaptation was also able to record an estimated 568% savings on topsoil consumption with an impact on the reduction of pollution from excavation. The research provides an initial insight into design options, potentials and limitations on the use of climbers for green roofs to guide future research and experimental verification.

The purpose of this study is to adjust the electronic transport performance of zinc oxide–silicon dioxide (ZnO-SiO₂) film by the construction of a grain boundary barrier.

ZnO-SiO₂ thin films were prepared on glass substrates by a simple sol-gel method. The crystal structure of ZnO and ZnO-SiO₂ powders were tested by X-ray diffraction with copper (Cu) Kα radiation. The absorption spectra of ZnO and ZnO-SiO₂ films were recorded by a ultraviolet-visible spectrophotometer. The micro electrical transport performance of ZnO-SiO₂ thin films were investigated by conductive atomic force microscope and electrostatic force microscope.

The results show that the current of ZnO-SiO₂ film decrease, indicating that the mobility of ZnO-SiO₂ film is greatly decreased, owing to the formation of the grain boundary barrier between ZnO and SiO₂. The phase variation of ZnO-SiO₂ film increases due to the electron accumulation at grain boundaries.

ZnO and ZnO-5SiO₂ thin films prepared on glass substrates by a simple sol-gel method were first studied by CAFM and EFM. The band gaps of ZnO and ZnO-5SiO₂ is ∼3.05 eV and 3.15 eV, respectively. The barrier height of ZnO-5SiO₂ film increased by ∼0.015 eV after introducing SiO₂. The phase variation intensity increased to a certain extent after doping SiO₂, due to the increased GB barrier. ZnO-5SiO₂ film will be a promising ETL candidate in the application of QLEDs field.

Recent advancements in technology have led to the exploration of solar-based thermal radiation and nanotechnology in the field of fluid dynamics. Solar energy is captured through sunlight absorption, acting as the primary source of heat. Various solar technologies, such as solar water heating and photovoltaic cells, rely on solar energy for heat generation. This study focuses on investigating heat transfer mechanisms by utilizing a hybrid nanofluid within a parabolic trough solar collector (PTSC) to advance research in solar ship technology. The model incorporates multiple effects that are detailed in the formulation.

The mathematical model is transformed using suitable similarity transformations into a system of higher-order nonlinear differential equations. The model was solved by implementing a numerical procedure based on the Wavelets and Chebyshev wavelet method for simulating the outcome.

The velocity profile is reduced by Deborah's number and velocity slip parameter. The Ag-EG nanoparticles mixture demonstrates less smooth fluid flow compared to the significantly smoother fluid flow of the Ag-Fe3O4/EG hybrid nanofluids (HNFs). Additionally, the Ag-Ethylene Glycol nanofluids (NFs) exhibit higher radiative performance compared to the Ag-Fe3O4/Ethylene Glycol hybrid nanofluids (HNFs).

Additionally, the Oldroyd-B hybrid nanofluid demonstrates improved thermal conductivity compared to traditional fluids, making it suitable for use in cooling systems and energy applications in the maritime industry.

The originality of the study lies in the exploration of the thermal transport enhancement in sun-powered energy ships through the incorporation of silver-magnetite hybrid nanoparticles within the heat transfer fluid circulating in parabolic trough solar collectors. This particular aspect has not been thoroughly researched previously. The findings have been validated and provide a highly positive comparison with the research papers.

The paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create the reflection and absorption property.

TiO2 nanoparticles are used as fillers, and PPG has been blended at the proper ratio of 1PPG: 0.2TiO2. The prepared resin has been applied onto the glass substrate at different numbers of glass immersions during the dip-coating fabrication process. One-time glass immersion is labeled as T1 coating, two-time glass immersion is labeled as T2 coating and three-time glass immersion is labeled as T3 coating. All the prepared coating systems were left dry at ambient temperature.

T3 coating showed the lowest reading of WCA value at 40.50°, due to higher surface energy at 61.73 mN/m. The T3 coating also shows the greatest absorbance property among the prepared coating systems among the prepared coating. In terms of reflectance property, the T2 coating system has great reflectance in UV region and near-infrared region, which is 16.47% and 2.77 and 2.73%, respectively. The T2 coating also has great optical transmission about 75.00% at the visible region.

The development of thermal insulation coating by studying the relationship between convection heat and reflectance at different wavelengths of incident light.

The developed coating shows high potential for glass window application.

The application of the hydrophilic coating on light absorption, reflectance and transmission at different wavelengths.

The purpose of this paper is the study of the electro-vortex flow (EVF) as well as heating and melting processes for mini industrial direct current electric arc furnace (DC EAF).

A mini DC EAF was designed, manufactured and installed to study the industrial processes of heating and melting a small amount of melt, being 4.6 kg of steel in the case under study. Numerical modelling of metal melting was performed using the enthalpy and porosity approach at equal values and non-equal values of the solidus and liquidus temperatures of the metal. The EVF of the liquid phase of metal was computed using the large eddy simulation model of turbulence. Melt temperature measurements were made using an infrared camera and a probe with a thermocouple sensor. The melt speed was estimated by observing the movement of particles at the top surface of melt.

The thermal flux for metal heating and melting, which is supplied through an arc spot at the top surface of metal, is estimated using the thermal balance of the furnace at melting point. The melting time was estimated using numerical modelling of heating and melting of metal. The process started at room temperature and finished once whole volume of metal was molten. The evolution of the solid/melt phase boundary as well as evolution of EVF patterns of the melt was studied.

Numerical studies of heating and melting processes in metal were performed in the case of intensive liquid phase turbulent circulation due to the Lorentz force in the melt, which results from the interaction of electrical current with a self-magnetic field.

This study aims to explore the synthesis, characteristics and utilization of polymer composites integrated with cutting-edge pigments.

The incorporation of advanced pigments introduces functionalities such as enhanced mechanical strength, thermal stability, ultraviolet resistance and color stability, thus extending the range of applications in diverse fields including automotive, aerospace, electronics and construction.

This review discusses the mechanisms underlying the property enhancements achieved through the incorporation of advanced pigments and highlights recent developments in the field.

Polymer composites incorporating advanced pigments have garnered significant attention in recent years because of their potential to enhance various material properties and broaden their applications. This paper explores the fabrication methods of polymer composites reinforced with organic/inorganic advanced pigments in brief along with their characteristics and applications.

The primary aim of this study is to provide actionable guidance for augmenting profitability in photovoltaic power plant investments within Iran’s solar energy sector. By emphasizing prudent capital management and strategic investment decisions, our research seeks to assist emerging businesses in attaining sustained success in this domain.

This study presents a comprehensive approach to refined decision-making in Iran’s solar energy sector. Our methodology integrates the best-worst method, ArcGIS software for site selection, and the TOPSIS method for decision-making, aiming to enhance precision and reliability.

Our research has identified ten promising regions suitable for photovoltaic power plant installations in Iran. Leveraging the TOPSIS method, we have made optimal selections among these alternatives. Furthermore, our exhaustive cost analysis, incorporating factors like land prices, system maintenance, revenue estimation, and various financial scenarios, has yielded insights into project cost-effectiveness.

By filling a notable gap in the literature regarding optimal site selection and investment strategies for photovoltaic power plants in Iran, our research contributes to the sustainable development of solar energy infrastructure. Through a thorough literature review and the development of a novel methodology, we offer valuable guidance for businesses and investors seeking success in Iran’s solar energy sector. Our study represents a significant advancement by introducing a novel methodology that integrates the best-worst method, ArcGIS software, and the TOPSIS method for site selection and investment analysis. These findings furnish valuable guidance for businesses seeking success in the solar energy sector, thereby contributing to the sustainable development of renewable energy infrastructure in Iran and beyond.

This paper aims to investigate the effect of different beam distance by understanding laser beam influence on solder joint quality. The utilisation numerical-based simulations and experimental validation will help to minimise the formation of micro void in PTH that can lead to cracks and defects on passive devices.

The research uses a combination approach of numerical-based simulation using Finite Volume Method (FVM) and experimental validation to explore the impact of different laser beam distances on solder joint quality in PTH assemblies. The study visualises solder flow and identifies the optimal beam distance for placing a soldering workpiece and a suitable tolerance distance for inserting the solder wire.

The simulation results show the formation of micro void that occurs in PTH region with low volume fraction and unbalance heat concentration profile observed. The experimental results indicate that the focus point of the laser beam at a 99.0 mm distance yields the smallest beam size. Simulation visualisation demonstrates that the laser beam’s converging area at +4.6 mm from the focus point which provides optimal tolerance distances for placing the solder wire. The high-power laser diode exhibits maximum tolerance distance at 103.6 mm from the focus point where suitable beam distance for positioning of the soldering workpiece with 50% laser power. The simulation results align with the IPC-A-610 standard, ensuring optimal filling height, fillet shape with a 90° contact angle and defect-free.

This research provides implications for the industry by demonstrating the capability of the simulation approach to produce high-quality solder joints. The parameters, such as beam distance and power levels, offer practical guidelines for improving laser soldering processes in the manufacturing industry.

This study contributes to the field by combining high-power laser diode technology with numerical-based simulations to optimise the beam distance parameters for minimising micro void formation in the PTH region.

This study seeks to develop an Environmental Sustainability Balanced Scorecard (ESBSC) articulated through a strategic map for collaborative implementation by municipalities by municipalities. In addition, it aims to elucidate the architecture of this tool.

The research uses qualitative methodology, initiating with document analysis, followed by municipal-level surveys and an interview with the Norte Portugal Regional Coordination and Development Commission (CCDR-N).

The study constructs an ESBSC that adopts an integrative approach to sustainability, focusing on municipal joint action. The tool fosters synergies and enhances cooperation. By incorporating a strategic mix, the tool contributes to improving the environmental management performance of the participating municipalities.

This study introduces a tool designed for municipalities that aspire to incorporate environmental sustainability into their strategies. This tool facilitates the implementation and management of a long-term environmental strategy, with potential implications for organization and its culture. In addition, it highlights critical environmental factors that should serve as a starting point in future studies or applications of this tool.

Involving both an academic institution and multiple municipalities, this research identifies critical environmental factors that enhance environmental awareness within municipalities and designs a tool that, when consciously adopted, can influence the culture dynamics of the population involved. Furthermore, it proposes a structured and systematic research method for creating an ESBSC for joint municipal action.

To the best of authors’ knowledge, this research constitutes the first exploratory attempt to devise an environmental strategy for joint municipal action. Although the tool emphasizes the environmental component, it promotes an integrated vision of sustainability. Despite the extensive application of balanced scorecards in various organizational contexts, their utilization in fostering environmental sustainability at a municipal level remains underexplored. This study addresses this gap by developing a tailored strategic tool that operationalizes environmental priorities within municipal governance frameworks.

This study aims to explore entropy evaluation in the bi-directional flow of Casson hybrid nanofluids within a stagnated domain, a topic of significant importance for optimizing thermal systems. The aim is to investigate the behavior of unsteady, magnetized and laminar flow using a parametric model based on the thermo-physical properties of alumina and copper nanoparticles.

The research uses boundary layer approximations and the Keller-box method to solve the derived ordinary differential equations, ensuring numerical accuracy through convergence and stability analysis. A comparison benchmark has been used to authenticate the accuracy of the numerical outcomes.

Results indicate that increasing the Casson fluid parameter (ranging from 0.1 to 1.0) reduces velocity, the Bejan number decreases with higher bidirectional flow parameter (ranging from 0.1 to 0.9) and the Nusselt number increases with higher nanoparticle concentrations (ranging from 1% to 4%).

This study has limitations, including the assumption of laminar flow and the neglect of possible turbulent effects, which could be significant in practical applications.

The findings offer insights for optimizing thermal management systems, particularly in industries where precise control of heat transfer is crucial. The Keller-box simulation method proves to be effective in accurately predicting the behavior of such complex systems, and the entropy evaluation aids in assessing thermodynamic irreversibilities, which can enhance the efficiency of engineering designs.

These findings provide valuable insights into the thermal management of hybrid nanofluid systems, marking a novel contribution to the field.