Search results

The purpose of this study is to scrutinize the influence of individual learning styles on the effectiveness of augmented reality (AR)-based learning in structural engineering. There has been a lack of research examining the correlation between learning efficiency and learning style, particularly in the context of quantitatively assessing the efficacy of AR in structural engineering education.

Using Kolb’s experiential learning theory (ELT), a model that emphasizes learning through experience, students from the construction management department are assigned four learning styles (converging, assimilating, diverging and accommodating). Performance data were gathered, appraised, and compared through the three dimensions from the Knowledge, Attitude and Practices (KAP) survey model across four categories of Kolb’s learning styles in both text-graph (TG)-based and AR-based learning settings.

The findings indicate that AR-based materials positively impact structural engineering education by enhancing overall learning performance more than TG-based materials. It is also found that the learning style has a profound influence on learning effectiveness, with AR technology markedly improving the information retrieval processes, particularly for converging and assimilating learners, then diverging learners, with a less significant impact on accommodating learners.

These results corroborate prior research analyzing learners' outcomes with hypermedia and informational learning systems. It was found that learners with an “abstract” approach (convergers and assimilators) outperform those with a “concrete” approach (divergers and accommodators). This research emphasizes the importance of considering learning styles before integrating technologies into civil engineering education, thereby assisting software developers and educational institutions in creating more effective teaching materials tailored to specific learning styles.

Considering the ongoing debate regarding the roles of business in society, this paper aims to examine the managerial understanding of corporate social responsibility (CSR) in Nepal.

This study uses explanatory sequential design under mixed methods of research. First, the questionnaire survey method was used to collect data from 168 managers of listed companies in Nepal. Second, semistructured interviews were conducted with 20 senior-level managers of listed companies to verify the results obtained from the survey and to gain a deeper understanding of the phenomena.

The survey results show that managerial understanding of CSR is mainly guided by the notions of corporate philanthropy, stakeholder approach and political CSR, respectively. However, the managerial understanding vis-à-vis political CSR and corporate philanthropy were found to be remarkably positively influenced by the firm’s size, whereas the stakeholder perspective was widely held by the managers regardless of their firm’s size. The interview results largely substantiated questionnaire survey findings and further revealed vivid dimensions within the philanthropic approach, stakeholder approach and political CSR.

Given the recent legal provisions vis-à-vis mandatory CSR spending in Nepal, the policymakers may devise and update common core and firm-size-specific informational, fiscal-economic, legal and partnering instruments based on the findings of this study. Besides, companies may go for appropriate institutional arrangements for CSR as needed.

The reaffirmation of conventionally accepted roles and the approval of relatively nascent political roles of business in a distinct socio–political–legal–economic context of Nepal can be an important contribution to the literature.

This research aims to develop and validate a framework for eradicating women’s discrimination in architectural design firms (ADFs) in Egypt and propose strategies for prospective adoption in the Gulf Cooperation Council (GCC) countries to increase the transformational impact of women on the architectural and urban developments of the Gulf region.

A combined qualitative and quantitative research approach was designed to accomplish four objectives. Firstly, to investigate the nature of business in ADFs, women’s discrimination and policies for gender equity (PGE) in architecture. Secondly, to analyse three case studies to validate the identified causes and impacts of women’s discrimination and examine the role of PGE towards eradicating women’s discrimination in ADFs. Thirdly, to conduct a survey questionnaire with a representative sample of ADFs to investigate their perception of women’s discrimination and the correlation between PGE towards eradicating women’s discrimination in ADFs. Based on the above, the research developed and validated a framework to eradicate women’s discrimination in ADFs in Egypt and suggested strategies for potential application in the GCC countries to increase the transformational role of women in the architectural and urban developments of the Gulf region.

Through literature review and case studies, the research identified and validated the causes and impacts of women’s discrimination as well as PGE in Architecture. The findings of data analysis showed that the highest-ranked causes of women discrimination in ADFs were “customs and beliefs” followed by “Underestimating women’s work” and “Recruiting males more than females”. Moreover, the highest-ranked impacts of women’s discrimination were “career shift and leaving the profession” followed by “decrease in creativity and innovation” and “decrease in economic growth”. Furthermore, the Spearman correlation test showed that while some PGE were correlated, others were not. These findings helped in the development of the proposed framework and proposed strategies.

This research presents a practical framework to eliminate women’s discrimination in ADFs in Egypt based on the findings of literature review, case studies and survey questionnaire. The framework explained in a workable way the objectives of the framework functions; activities; tools and techniques; involved personnel and needed resources as well as enforcing mechanisms. It was validated by a representative sample of ADFs in Egypt to ensure its practicability and viability and suggested strategies for implementation in the GCC countries to increase women’s role in architectural and urban development.

The research identified and validated the causes and impacts of women’s discrimination as well as PGE in Architecture. Moreover, the research investigated the perception of women’s discrimination and the correlation between PGE through conducting a survey questionnaire with a representative of ADFs in Egypt. The research tackled a topic that received scant attention in construction literature, especially in Egypt and the GCC countries. The research developed and validated a framework to eradicate women’s discrimination in ADFs in Egypt. It represents a synthesis that is novel and creative in thought and adds value to the knowledge in a manner that has not previously occurred. The research suggested several strategies for the prospective implementation of the framework in the GCC countries as an approach to enhancing the transformational role of women in the architectural and urban developments of the Gulf region.

Rebar is the prime component of reinforced concrete structures, and rebar monitoring is a time-consuming and technical job. With the emergence of the fourth industrial revolution, the construction industry practices have evolved toward digitalization. Still, hesitation remains among stakeholders toward the adoption of advanced technologies and one of the significant reasons is the unavailability of knowledge frameworks and implementation guidelines. This study aims to investigate technical factors impacting automated monitoring of rebar for the understanding, confidence gain and effective implementation by construction industry stakeholders.

A structured study pipeline has been adopted, which includes a systematic literature collection, semistructured interviews, pilot survey, questionnaire survey and statistical analyses via merging two techniques, i.e. structural equation modeling and relative importance index.

The achieved model highlights “digital images” and “scanning” as two main categories being adopted for automated rebar monitoring. Moreover, “external influence”, “data-capturing”, “image quality”, and “environment” have been identified as the main factors under “digital images”. On the other hand, “object distance”, “rebar shape”, “occlusion” and “rebar spacing” have been highlighted as the main contributing factors under “scanning”.

The study provides a base guideline for the construction industry stakeholders to gain confidence in automated monitoring of rebar via vision-based technologies and effective implementation of the progress-monitoring processes. This study, via structured data collection, performed qualitative and quantitative analyses to investigate technical factors for effective rebar monitoring via vision-based technologies in the form of a mathematical model.

The purpose of this paper is to develop a framework to facilitate early supplier involvement (ESI) as an approach for reducing construction waste (CW) generated during the design process.

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, the literature review was used to investigate CW, CW generated during the design process, the design process and ESI. Second, two construction projects were analysed to investigate the role of ESI towards reducing CW generated during the design waste. Third, a survey questionnaire was carried out with a representative sample of architectural design firms (ADFs) in Egypt to examine their perception and application of ESI towards reducing CW generated during the design process. Based on the results of the above, the research developed a framework to facilitate ESI during the design process to reduce CW.

Through literature review, the research highlighted the causes of CW generated during the design process and identified the benefits and challenges that encounter ESI in ADFs. Results of data analysis showed that “last-minute changes due to client requirements” was ranked the highest challenges of ESI in ADFs in Egypt followed by “lack of design experience”. Moreover, “providing technical information about materials and equipment and their capabilities” was ranked by respondents as the highest contributions of suppliers during the design process which leads to waste reduction followed by “better estimation of materials and costs”. Finally, respondents stated that “resistance of ADFs to include suppliers in the design phase” was ranked the highest challenge of ESI in the design process followed by “no clear guidelines or policies that organise ESI”.

Because of the conceptual nature of the proposed framework, it has to be tested and validated to ensure its capability to overcome the challenges of ESI as an approach for reducing CW generated during the design process.

This research presents a practical solution to the problem of CW generated during the design process through ESI.

The research discussed the causes of CW originated from the design process and the benefits and challenges of ESI in ADFs. It investigated the perception and application of ESI in ADFs in Egypt. The proposed framework which was designed to facilitate the integration of suppliers in the early stages of the project life cycle represents a synthesis that is novel and creative in thought and adds value to the knowledge in a manner that has not previously occurred.

The purpose of this study is to assess the potential benefits of digital technologies (DTs) in bolstering the circular economy (CE) transition in the construction industry, to speed up the attainment of sustainable development objectives.

A detailed literature review was undertaken to identify DTs that could influence CE transition and the benefits of these DTs in the CE transitioning efforts of the construction industry. Based on these, a survey questionnaire was formulated and administered to construction professionals using convenient sampling techniques. With a response rate of 49.42% and data reliability of over 0.800, the gathered data were analysed using frequency and percentage, mean item score, normalisation value, coefficient of variation, Kendall’s coefficient of concordance, analysis of variance and factor analysis.

This study found that the construction experts agreed that building information modelling, blockchain technology, RFID, drone technology and cloud computing are the leading DTs that have the potential to influence and speed up CE transition in construction. Also, six clusters of benefits of DTs in bolstering EC are quicken CE transition, proactive waste management, recycling and zero waste, data management and decision-making, enhance productivity and performance and resource optimisation.

Studies on the integration of DTs in CE transition are scarce and it is even lacking in the Nigerian context. To the best of the authors’ knowledge, this study is the first to assess the role of DTs in CE transitioning in the Nigerian construction industry.

The aim of this paper was to study current practices in FM work order processing to support and improve decision-making. Processing and prioritizing work orders constitute a critical part of facilities and maintenance management practices given the large amount of work orders submitted daily. User-driven approaches (UDAs) are currently more prevalent for processing and prioritizing work orders but have challenges including inconsistency and subjectivity. Data-driven approaches can provide an advantage over user-driven ones in work-order processing; however, specific data requirements need to be identified to collect and process the functional data needed while achieving more consistent and accurate results.

This paper presents the findings of an online survey conducted with facility management (FM) experts who are directly or indirectly involved in processing work orders in building maintenance.

The findings reflect the current practices of 71 survey participants on data requirements, criteria selection, rankings, with current shortcomings and challenges in prioritizing work orders. In addition, differences between criteria and their ranking within participants’ experience, facility types and facility sizes are investigated. The findings of the study provide a snapshot of the current practices in FM work order processing, which aids in developing a comprehensive framework to support data-driven decision-making and address the challenges with UDAs.

Although previous studies have explored the use of selected criteria for processing and prioritizing work orders, this paper investigated a comprehensive list of criteria used by various facilities for processing work orders. Furthermore, previous studies are focused on the processing and prioritization stage, whereas this paper explored the data collected following the completion of the maintenance tasks and the benefits it can provide for processing future work orders. In addition, previous studies have focused on one specific stage of work order processing, whereas this paper investigated the common data between different stages of work order processing for enhanced FM.

This paper aims to examine the perceptions of owners and accountants of small- and medium-sized entities (SMEs) on the users and their financial information needs of SME financial reporting.

Postal questionnaire surveys with owners and accountants of SMEs were used to identify users and their financial information needs. In total, 1,498 questionnaires were sent to SME owners and accountants. A total of 358 questionnaires were returned, generating 323 useable questionnaires. The management branch of stakeholder theory is used for the study which asserts that company management is expected to meet the expectations of those stakeholders who are more powerful than others.

The users of Sri Lanka SME financial information were limited to owners, banks and Department of Inland Revenue. Users and financial information needs of owners varied in relation to the size of the SME. Financial information are useful for making capital investment and planning decisions for owners regardless of the size of the SME. By sharing information with outside parties, disclosures can diminish information asymmetries between the firms and its stakeholders. The top three reasons for which owners use SME financial information are for planning purposes, estimating income tax liabilities, and taking marketing and pricing decisions.

Since the study focuses only on the views of owner-managers and accountants of SMEs, the holistic understanding of uses of SME financial information by other user groups cannot be achieved.

The results of this study provide international and local standard setters with an indication of future direction for SME financial reporting.

This paper extends existing knowledge on users and their financial information needs of SMEs in developing countries. Consequently, the findings of this paper make a valuable contribution to the work of practitioners such as local and international standards-setters and regulators who may be considering developing/revising financial reporting framework for SMEs either worldwide or in developing countries.

Although SME financial reporting has attracted enormous attention in the recent accounting literature, academic research into SME financial reporting is scant. This paper extends existing knowledge on users and their financial information needs of SMEs in developing countries. The general purpose financial reporting model and the accounting standard IFRS for SMEs in particular would not be applicable to Sri Lankan SMEs unless it modifies to reflect the financial information needs of users of Sri Lankan SME financial information.

This study aims to investigate the critical success factors of digital transformation in the construction industry and identify whether the respondents' profiles influence their perceptions of critical success factors for digital transformation.

To achieve the objectives, a literature review was first conducted based on technology-organization-environment (TOE) framework. Then a questionnaire survey was carried out. A total of 86 people were surveyed in this study, mainly from the construction industry. At the level of data processing, SPSS was used for analysis. Among the main tests used were the Shapiro–Wilk test, reliability analysis, mean rank analysis, Kruskal–Wallis test and Mann–Whitney U test.

The study identified 15 critical success factors of digital transformation and found the three most important factors of digital transformation. Furthermore, respondents with different years of experience, enterprises with different sizes and different years made no difference in the perception of factors. Respondents' different occupations and types of enterprises created a bias in the perception of factors for digital transformation.

Firstly, the small sample size of the questionnaire limits the reference value of data analysis for certain groups. In addition, this study focuses broadly on construction enterprises without specifically examining different types of enterprises, thus lacking depth in its findings.

This study establishes a connection between TOE theory and the construction industry through an extensive literature review, identifying relevant factors and providing a reference for future research.

The study's results would enrich the research on digital transformation in the construction industry and provide a reference for the digital transformation of construction enterprises.