Search results

Personal Protective Equipment plays an inevitable part in the current scenario of pandemics in the world. A novel coronavirus, Severe Acute Respiratory Syndrome-Corona Virus-2 (SARS-Cov 2), began as an outbreak of pneumonia in Wuhan, China, in late December 2019, and quickly spread worldwide. It quickly escalated into an international public health crisis. This opened up the high demand for the innovation and research of new materials in the Personal Protective Equipment industry.

PubMed, Embase and Google Scholar were searched for relevant literature regarding personal protective equipment and the information was organized in a systematic way.

There are no adequate number of studies taken up in the field of use of textiles in medical applications especially with PPEs.

This structured review will generate a sense of the significance of using PPE for controlling pandemics and also awaken need for additional research and innovations in this area.

The authorities of the management should take timely intervention in choosing the right material for their PPE in their hospitals. Hence health care professionals teams have an inevitable role in preventing the adverse environmental impact due to the inadvertent disposal of PPEs.

There is a lack of systematic way of disposing contaminated single-use face masks in a safe, environmentally acceptable manner. The dumping of single-use PPE in domestic garbage has had an adverse effect on the environment. Mismanaged plastic waste endangers the health of ecosystems by polluting marine and terrestrial environments, posing a significant risk of ingestion or injury to animals and contaminating habitats.

This review article provides an in-depth review of the use of different materials in PPE and challenges regarding its long-term use and implications on the environment.

Nanotechnology (NT) advancements in personal protective textiles (PPT) or personal protective equipment (PPE) have alleviated spread and transmission of this highly contagious viral disease, and enabled enhancement of PPE, thereby fortifying antiviral behavior.

Review of a series of state of the art research papers on the subject matter.

This paper expounds on novel nanotechnological advancements in polymeric textile composites, emerging applications and fight against COVID-19 pandemic.

As a panacea to “public droplet prevention,” textiles have proven to be potentially effective as environmental droplet barriers (EDBs).

PPT in form of healthcare materials including surgical face masks (SFMs), gloves, goggles, respirators, gowns, uniforms, scrub-suits and other apparels play critical role in hindering the spreading of COVID-19 and other “oral-respiratory droplet contamination” both within and outside hospitals.

When used as double-layers, textiles display effectiveness as SFMs or surgical-fabrics, which reduces droplet transmission to <10 cm, within circumference of ∼0.3%.

NT advancements in textiles through nanoparticles, and sensor integration within textile materials have enhanced versatile sensory capabilities, robotics, flame retardancy, self-cleaning, electrical conductivity, flexibility and comfort, thereby availing it for health, medical, sporting, advanced engineering, pharmaceuticals, aerospace, military, automobile, food and agricultural applications, and more. Therefore, this paper expounds on recently emerging trends in nanotechnological influence in textiles for engineering and fight against COVID-19 pandemic.

The purpose of this study was to address a gap in the current literature by examining the integration of 3D digital prototyping technology in the co-creation process of new sustainable and multi-functional healthcare PPE clothing design in collaboration with real users.

Within the user-centered design framework, 35 participants from major hospitals, along with fashion college students in New York City, actively engaged in the co-creation innovation process for this research. Data collection and analysis were conducted through interview-based qualitative analysis, using the content analysis method.

The results highlight the effectiveness of integrating 3D digital prototyping technologies in the co-creation innovation process in achieving all research objectives, including fulfilling users’ health care PPE clothing needs.

This case study presents an example of co-creation innovation in collaboration with actual industry users, exploring the effectiveness of 3D digital prototyping for the co-creation process. The findings of this study can be used to formulate future research studies.

International outbreak of the SARS-CoV-2 infection has fostered the Italian government to impose the FFP2 protective facial masks in closed environments, including bar, restaurants and, more in general, in the food sector. Protective facial masks are rocketing, both in mass and in costs, in the food sector imposing efforts in fostering reuse strategies and in the achievement of sustainable development goals. The scope of the present paper is to depict possible strategies in manufacturing and reuse strategies that can reduce the carbon footprint (CF) of such devices.

To implement circular economy strategies in the protective facial masks supply chain, it was considered significant to move towards a study of the environmental impact of such devices, and therefore a CF study has been performed on an FFP2 facial mask used in the food sector. Different materials besides the mostly used polypropylene (PP) (polyethylene (PE), polycarbonate (PC), poly (lactic acid) (PLA), cotton, polyurethane (PUR), polystyrene (PS) and nylon 6,6) and different sanitisation alternatives as reuse strategies (both laboratory and homemade static oven, ultraviolet germicidal irradiation) readily implemented have been modelled to calculate the CF of a single use of an FFP2 mask.

The production of textiles in PP, followed by disposal was the main contributor to CF of the single-use FFP2 mask, followed by packaging and transportations. PP and PE were the least impacting, PC, cotton and Nylon 6-6 of the same weight results the worst. PLA has an impact greater than PP and PE obtained from crude oil, followed by PUR and PS. Static laboratory oven obtained an 80.4% reduction of CF with respect to single use PP-made FFP2 mask, whereas homemade oven obtained a similar 82.2% reduction; UV cabinet is the best option, showing an 89.9% reduction.

The key strategies to reduce the environmental impacts of the masks (research for new materials and reuse with sanitisation) should ensure both the retention of filtering capacities and the sanitary sterility of the reused ones. Future developments should include evaluations of textile recycling impacts, using new materials and the evaluation of the life cycle costs of the reused masks.

This paper intends to provide to stakeholders (producers, consumers and policy makers) the tools to choose the best option for producing and reuse environmentally friendly protective facial masks to be used in the food sector, by using both different materials and easily implemented reuse strategies.

The reduction of the CF of protective facial masks in the food sector surely will have relevant positive effects on climate change contributing to reach the goals of reducing CO₂ emissions. The food sector may promote sustainable practices and attract a niche piece of clients particularly sensible to such themes.

The paper has two major novelties. The first one is the assessment of the CF of a single use of an FFP2 mask made with different materials of the non-woven filtering layers; as the major contribution to the CF of FFP2 masks is related to the non-woven textiles manufacturing, the authors test some other different materials, including PLA. The second is the assessment of the CF of one single use of a sanitised FFP2 mask, using different sanitation technologies as those allowed in bars or restaurants.

This article investigates how the healthcare sector can reorganize its procurement network to better balance its resilience and cost-minimization objectives.

A single case study was conducted on the procurement of personal protective equipment (PPE) during the first COVID-19 pandemic wave in the Quebec public healthcare network. Interviews were conducted with stakeholders from the supply chain management (SCM) departments at eight public healthcare institutions.

Two major challenges in the early months of the pandemic impacted the development of resilience in the healthcare network. First, peripheral actors’ decisions, which orient procurement objectives, limited the deployment of resilience measures in the supply chain (SC). Second, SC resilience included hundreds of products other than PPE that are critical to the delivery of care. The article illustrates the challenges of SCR, which will inevitably be accompanied by additional costs when purchasing in the public healthcare sector is often focused on the lowest price.

Drawing from the network perspective model, this article examines the actions of Quebec supply network stakeholders through the three phases of SCR: anticipation, response to disruption, and recovery. Finally, the article suggests that decision-makers remove the cost of resilience measures from the purchase price of products, in order to maintain these measures over the long term.

Assess the realistic impacts of implementing an Radio Frequency Identification (RFID)/Internet of Things (IoT) uniforms’ distribution system for managing medical personnel’s scrubs in operating rooms. The authors use a hybrid simulation framework to address the following objectives and challenges: a) reduce and control operating rooms’ level of inventory; b) stabilize scrubs’ demand and c) improve infection control and prevention of cross-contamination (through scrubs over manipulation and hoarding).

The authors adopt a Design Science approach. This methodological approach is used to design, develop, create and evaluate information technology “artifacts” (e.g. constructs, models, methods and instantiations) intended to solve organizational problems and make research contributions (Peffers et al., 2007). More specifically, the authors follow the Design Science Research Methodology process model which includes six steps: problem identification and motivation, definition of the objectives for a solution, design and development, demonstration, evaluation, and communication.

To assess the realistic impacts of implementing an RFID-IoT uniforms’ distribution system for managing medical personnel’s scrubs in operating rooms, the authors adopted a design science approach and initiated the research by documenting the business case and reviewed the existing literature to build a comparative analysis of existing uniforms’ distribution systems. The authors used a hybrid simulation model to assess the impact of three business cases: present mode of operation, implementing smart shelves or the smart distributors. The authors show that smart dispensers allow a greater control on scrubs’ utilization while eliminating the cross-contamination of the medical personnel.

Through this research study, the authors provide hospitals’ managers a scientific support for uniforms’ (scrubs) distribution process improvement. The authors use a hybrid simulation model to compare innovative solutions for uniforms’ distribution systems in the form of “smart cabinets” supported by Radio Frequency Identification (RFID)/Internet of Things (IoT) technologies and choose the most appropriate design for the hospital to meet two main challenges: a) inefficiency of uniform replenishment-distribution system and b) noncompliancy with infection control regulations caused by the distribution system.

From a methodological perspective, this paper addresses concerns from researchers calling quantitative research methods and using case-based research strategy to address IoT issues and assess the system in practice. From a broader point of view, this work confirms the predominant interest of RFID-IoT research work in the arena of supply chain management and logistics as the technology is used for tracking purpose and for monitoring applications. It is also one response to the research community suggesting that “hospitals should evaluate the medical effectiveness of the new technologies as well as the cost before adoption”.

A direct correlation exists between waste disposal, disease spread and public health. This article systematically reviewed healthcare waste and its implication for public health. This review identified and described the associations and impact of waste disposal on public health.

This paper systematically reviewed the literature on waste disposal and its implications for public health by searching Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA), PubMed, Web of Science, Scopus and ScienceDirect databases. Of a total of 1,583 studies, 59 articles were selected and reviewed.

The review revealed the spread of infectious diseases and environmental degradation as the most typical implications of improper waste disposal to public health. The impact of waste includes infectious diseases such as cholera, Hepatitis B, respiratory problems, food and metal poisoning, skin infections, and bacteremia, and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife.

Infectious diseases such as cholera, hepatitis B, respiratory problems, food and metal poisoning, skin infections, bacteremia and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife are some of the public impacts of improper waste disposal.

Healthcare industry waste is a significant waste that can harm the environment and public health if not properly collected, stored, treated, managed and disposed of. There is a need for knowledge and skills applicable to proper healthcare waste disposal and management. Policies must be developed to implement appropriate waste management to prevent public health threats.

The purpose of this paper is to assess nurse’s knowledge and practice regarding basic life support (BLS) skills while working with SARS-CoV-2 patients in Jordanian hospitals.

A cross-sectional survey was conducted among 386 nurses with direct contact with SARS-CoV-2 patients at Jordanian hospitals. A self-administered structured questionnaire was used based on the American Heart Association (AHA) guidelines.

A total of 386 participants were recruited. The mean years of experience were 7.89 (SD = 5.97). About three quarters of participants revealed they deal with SARS-CoV-2 patients directly (n = 284, 73.6%). The total mean score of nurse’s knowledge was 4.44 (SD = 1.22), while the total mean score of practice was 8.44 (SD = 2.05). Independent t-test was used, which revealed a statistically significant difference between educational level and total score of nurse’s knowledge [t(386) = 0.215 and p = 0.001] and between training to deal with SARS-CoV-2 during BLS and total score of practice [t(386) = 2.66 and p = 0.008]. Pearson correlation discloses a positive correlation between the total score of knowledge and practice (r = 0.343 and p = 0.001).

In general, nurses revealed a moderate level of knowledge and practice of BLS skills. However, assessing nurse’s knowledge and practice during the outbreak of SARS-CoV-2 plays a key role in identifying the gap in nurse’s knowledge and practice, and therefore, it will have an impact on providing high-quality BLS to save infected patients while providing maximum safety according to AHA guidelines.

This study is the first study that examined the level of knowledge and practice of BLS skills during SARS-CoV-2 pandemic in Jordan.

Ultrasonic welding is an emerging apparel manufacturing technique. However, the applications are widely explored in the field of technical textiles, with less exploration in the apparel endues. The purpose of this study is to explore the application of ultrasonic welding in apparel by analyzing the impacts of different parameters.

This study analyzed the influence of ultrasonic welding parameters, including pressure, welding speed and ultrasonic power on the seam performances (seam strength, seam bursting strength, seam thickness and seam stiffness). The parameters are optimized using Box–Behnken experimental design to achieve better seam performances.

The properties of ultrasonic seams are influenced by welding and fabric properties. Ultrasonically welded seams showed better performances in the case of comfort properties of seams, whereas the functional properties are lesser compared to conventional seams.

The findings of the research clearly outline the level of influence of different parameters on the performance of the ultrasonically welded seams in knitted fabrics, which can greatly help in applying ultrasonic welding manufacturing methods in apparel manufacturing.