Search results

The purpose of this paper is to provide insights into the current practice, challenges and future development trends of intelligent compaction (IC) technology from a bibliometric perspective.

A bibliometric analysis on IC-relevant studies is presented. Through this quantitative manner, insights into the current IC research practice and development trends have been derived from the perspectives of publications and citations, spatial distribution, knowledge construction, structural variations, existing problems, and conclusions and recommendations.

Currently, IC applications are confronted with the issues of intelligent compaction measurement values (ICMVs) applicability, autonomous control, specifications and applications. To address the issues, three potential research directions are identified: a comprehensive ICMV measurement system that is designated for single layer analysis; autonomous control mechanisms with integrated management capabilities that can efficiently collaborate all stakeholders; and a standardized application workflow and the cost-benefit evaluation of IC in the context of the full life cycle.

The literature used in this paper is collected from the Web of Science. Although the database covers almost all the important publications in IC field, studies not indexed by the database are not considered.

This research quantitatively analyzes the current IC practice and development trends from the perspectives of bibliometric analysis. It provides an overview of the knowledge construction and development of IC technology. The discussions about the problems and the suggested solutions can be useful for those interested in this field.

There is a lack of clarity about what constitutes Science, Technology, Engineering, Arts and Mathematics (STEAM) education and what the arts contribute. In this paper the authors discuss a distinct model, theorised from a five-year study of a particular, innovative STEAM education project (The Imagineerium), and developed by the researchers through working with primary school teachers in England within a second project (Teach-Make). The paper examines how teachers implemented this model, the Trowsdale art-making model for education (the TAME), and reflected on its value and positive impact on their planning and pedagogy.

The paper draws on two studies: firstly, a five-year, mixed methods, participative study of The Imagineerium and secondly a participative and collaborative qualitative study of Teach-Make.

Study of The Imagineerium showed strong positive educational outcomes for pupils and an appetite from teachers to translate the approach to the classroom. The Teach-Make project showed that with a clear curriculum model (the TAME) and professional development to improve teachers' planning and active pedagogical skills, they could design and deliver “imagineerium-like” schemes of work in their classrooms. Teachers reported a positive impact on both their own approach to supporting learning, as well as pupil progression and enjoyment.

The paper argues that the TAME, a consolidation of research evidence from The Imagineerium and developed through Teach-Make, offers both a distinctive and effective model for STEAM and broader education, one that is accessible to, valued by and manageable for teachers.

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.

In this study, AlCoCrFeNi–Cu (Cu-based) and AlCoCrFeNi–Ti (Ti-based) high entropy alloys (HEAs) were fabricated using a direct blown powder technique via laser additive manufacturing on an A301 steel baseplate for aerospace applications. The purpose of this research is to investigate the electrical resistivity and oxidation behavior of the as-built copper (Cu)- and titanium (Ti)-based alloys and to understand the alloying effect, the HEAs core effects and the influence of laser parameters on the physical properties of the alloys.

The as-received AlCoCrFeNiCu and AlCoCrFeNiTi powders were used to fabricate HEA clads on an A301 steel baseplate preheated at 400°C using a 3 kW Rofin Sinar dY044 continuous-wave laser-deposition system fitted with a KUKA robotic arm. The deposits were sectioned using an electric cutting machine and prepared by standard metallographic methods to investigate the electrical and oxidation properties of the alloys.

The results showed that the laser power had the most influence on the physical properties of the alloys. The Ti-based alloy had better resistivity than the Cu-based alloy, whereas the Cu-based alloy had better oxidation residence than the Ti-based alloy which attributed to the compositional alloying effect (Cu, aluminum and nickel) and the orderliness of the lattice, which is significantly associated with the electron transportation; consequently, the more distorted the lattice, the easier the transportation of electrons and the better the properties of the HEAs.

It is evident from the studies that the composition of HEAs and the laser processing parameters are two significant factors that influence the physical properties of laser deposited HEAs for aerospace applications.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Doctors' labour and medicines are special necessities for human survival and evolution. Since China launched the healthcare reform, the theoretical circles' discussions have not yet clarified the respective special properties of doctors' labour and medicines as goods and the internal relations between doctors' labour and medicines at the level of the theoretical basis.

Health is a prerequisite for people's all-round development, a precondition for economic and social development and the people's common aspiration. The all-round moderately prosperous society could not be achieved without people's all-round health.

The authors believe the socialist relation between doctors' labour and medicines with Chinese characteristics should be one that is people-oriented, and the corporatization of hospitals or the capitalization of doctors' labour should be avoided.

In this paper, the authors explore the particularity of doctors' labour, particularity of medicine production, circulation, consumption and the internal relations between doctors' labour and medicines by using the analytical approach of Marxist political economy while considering the special roles of doctor's labour and medicines in the reproduction of labour power and put forward the theoretical basis for the segregation of doctor's labour and medicines.

Because of the anisotropy of the process and the variability in the quality of printed parts, finite element analysis is not directly applicable to recycled materials manufactured using fused filament fabrication. The purpose of this study is to investigate the numerical-experimental mechanical behavior modeling of the recycled polymer, that is, recyclable polyethylene terephthalate (rPET), manufactured by a deposition FFF process under compressive stresses for new sustainable designs.

In all, 42 test specimens were manufactured and analyzed according to the ASTM D695-15 standards. Eight numerical analyzes were performed on a real design manufactured with rPET using Young's compression modulus from the experimental tests. Finally, eight additional experimental tests under uniaxial compression loads were performed on the real sustainable design for validating its mechanical behavior versus computational numerical tests.

As a result of the experimental tests, rPET behaves linearly until it reaches the elastic limit, along each manufacturing axis. The results of this study confirmed the design's structural safety by the load scenario and operating boundary conditions. Experimental and numerical results show a difference of 0.001–0.024 mm, allowing for the rPET to be configured as isotropic in numerical simulation software without having to modify its material modeling equations.

The results obtained are of great help to industry, designers and researchers because they validate the use of recycled rPET for the ecological production of real-sustainable products using MEX technology under compressive stress and its configuration for numerical simulations. Major design companies are now using recycled plastic materials in their high-end designs.

Validation results have been presented on test specimens and real items, comparing experimental material configuration values with numerical results. Specifically, to the best of the authors’ knowledge, no industrial or scientific work has been conducted with rPET subjected to uniaxial compression loads for characterizing experimentally and numerically the material using these results for validating a real case of a sustainable industrial product.

Touch plays an important role in the evaluations of products. However, prior quantitative touch research does not present a holistic perspective of haptics. This study aims to provide a more comprehensive understanding of haptic information that consumers attain from touch.

Adopting a qualitative research approach, semi-structured, depth interviews were conducted with industry experts.

Based on the findings, this research proposes a conceptual model of consumer haptic perception consisting of seven key influences, namely, the effects of haptic sensation, haptic perception, the influence of individual factors, the influence of external environmental factors, the multi-dimensionality of haptics, haptic cue congruity and haptic dominance.

This study suggests firms to understand the importance of consumers’ haptic perception as an opportunity to engage an individual’s heart and mind through information attained through touch.

This is the first study in marketing to propose a conceptual model of haptics comprising several new haptic influences. This model contributes to the emerging literature of sensory marketing by providing directions for future touch research by capturing the dynamic nature of haptics.

El tacto desempeña un papel importante en nuestras evaluaciones de los productos. Sin embargo, las investigaciones cuantitativas anteriores sobre el tacto no presentan una perspectiva holística de la percepción táctil. Este artículo pretende ofrecer una comprensión más completa de la información táctil que los consumidores obtienen del contacto.

Adoptando un enfoque de investigación cualitativa, se realizaron entrevistas semiestructuradas en profundidad con expertos del sector.

A partir de los resultados, esta investigación propone un modelo conceptual de la percepción táctil del consumidor que consta de siete influencias clave: Los efectos de la sensación háptica, la percepción háptica, la influencia de los factores individuales, la influencia de los factores ambientales externos, la multidimensionalidad de la sensación táctil, la congruencia de las pistas táctiles y la dominancia de la sensación táctil.

Este estudio sugiere a las empresas que comprendan la importancia de la percepción táctil de los consumidores como una oportunidad para captar el corazón y la mente del individuo a través de la información obtenida mediante el tacto.

Este es el primer estudio en marketing que propone un modelo conceptual de la percepción táctil que incluye varias influencias táctiles nuevas. Este modelo contribuye a la literatura emergente del marketing sensorial proporcionando direcciones para la futura investigación táctil al capturar la naturaleza dinámica del sentido del tacto.

触摸在我们对产品的评价中起着重要作用。然而, 在先前定量的触觉研究中并未呈现触觉的整体视角。本文旨在更全面地了解消费者通过触摸获得的触觉信息。

本文采用定性研究方法, 与行业专家进行了半结构化的深度访谈。

本研究提出了一个消费者触觉感知的概念模型, 其中包括七个关键影响因素：触觉的影响、触觉感知、个人因素的影响、外部环境因素的影响、触觉的多维性、触觉线索的一致性和触觉的主导性。

这项研究建议企业了解消费者触觉感知的重要性, 并将触觉信息传达作为吸引消费者心灵的机会。

这是营销领域首次提出触觉概念模型的研究, 该模型包含几种新的触觉影响因素。这个触觉概念模型通过捕捉触觉的动态特性为未来的触觉研究提供方向, 从而为新兴的感官营销文献做出了贡献。