Search results

The objective was to evaluate the effect of banana peel into cake (a bakery product that may add bananas) and panettone (a product that never is added to bananas) formulations on consumers' acceptance and perceived attributes and the effect on the technological properties of the product.

Bakery products were produced with banana peel in the formulation and control samples without residue. Volunteers scored their acceptance and checked all attributes applied to the four samples in the blind and informed tests. The texture, color, proximate composition and bake properties were measured.

The acceptance of both cakes, with and without banana peel, was not affected when consumers were informed that there was a residue in both cakes. Relative risk indicated that information had no influence on acceptance. Panettone with banana pulp showed a reduction in acceptance when volunteers were informed of the presence of banana peel. Risk analysis showed a significant relative risk of product rejection when consumers were aware of information. The addition of banana peel enhanced panettone chewiness and crumb hardness, reduced bake loss of cakes, reduced the volume of both products and changed some color parameters of both products.

Banana peel is a source of functional compounds, but it is not clear how consumers react when informed that the food presents it.

This paper aims to evaluate the effects of banana (Musa) peel and guava (Psidium guajava) leaves extract as mordants on jute–cotton union fabrics dyed with onion skin extract as a natural dye.

The dye was extracted from the outer skin of onions by boiling in water and later concentrated. The bio-mordants were prepared by maceration using methanol and ethanol. The fabrics were pre-mordanted, simultaneously mordanted and post-mordanted with various concentrations according to the weight of the fabric. The dyed and mordanted fabrics were later subjected to measurement of color coordinates, color strength and colorfastness to the washing test. Furthermore, the dyed samples were characterized by Fourier transform infrared, and different chemical bonds were analyzed by X-ray photoelectron spectroscopy analysis.

Significant improvement was obtained in colorfastness and color strength values in various instances using banana peel and guava leaves as bio mordants. Post-mordanted with banana peel provided the best results for wash fastness. Better color strength was achieved by fabric post-mordanted with guava leave extracts.

Sustainable dyeing methods of natural dyes using banana peel and guava leaves as bio mordants were explored on jute–cotton union fabrics. Improvement in colorfastness and color strength for various instances was observed. Thus, this paper provides a promising alternative to metallic salt mordants.

In this case study, we examine how a citrus peel valorising company based in the Netherlands was able to adopt a circular business model while navigating regulatory, managerial, and supply chain-related barriers.

In-depth, semi-structured interviews with key personnel in the company, notes from field observations, photographs of the production process, and documents from a legal judgement served as data for this single, qualitative case study. Data were coded inductively using the in vivo technique and were further developed into four themes and a case description.

Results from our study indicate that the regulatory and political contexts in the Netherlands were critical to the company’s success. Like in the case of most fruitful industrial symbioses, partnerships founded on mutual trust and economically appealing value propositions played a crucial role in ensuring commercial viability. Collaborating with larger corporations and maintaining transparent communication with stakeholders were also significant contributing factors. Lastly, employees’ outlook towards circularity combined with their willingness to learn new skills were important driving factors as well.

In addition to expanding the scholarship on the adoption of circular business models, this research offers novel insights to policymakers and practitioners. It provides empirical evidence regarding the importance of public awareness, adaptable legislation, and harmonised policy goals for supporting sustainable entrepreneurship in the circular economy.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard, walnut husk (WH) and oleaster peel (PO) are known as two important sources of tannin and are bulky wastes. Because of the high percentage of tannin, these materials can be used as a natural source for the preparation of bio-mordant in the dyeing process.

In this study, Reseda and Madder were used as natural dyes in the presence of a mixture of two bio-mordants. WH and PO were selected as bio-mordant. All natural resources are extracted to obtain the juice. The phenolic percentage of tannin-containing extracts was evaluated and then it was used for wool yarns by premordanting method. The results of evaluating the fastness properties using the ISO method.

The most important achievement of this research is the use of agricultural waste in the dyeing process to reduce environmental pollution and create added value. All compounds rich in tannin have some phenolic components, therefore the amount of phenolic content of these extracts was evaluated. The effect of mixing the mordant on the color characteristics of the yarns was investigated and the results showed that changing the ratio of the combination of two mordant is effective on the K/S values. The results of evaluating the fastness properties using the ISO method showed that the washing, rubbing and light fastness in the presence of mordant is good, good and moderate, respectively.

In this paper, to the best of the authors’ knowledge, for the first time, the combination of two natural extracts obtained from agricultural waste has been used to create a new bio-mordant on fibers and improve stability.

This paper aims to report the findings of a survey study exploring perceptions about cognitive impairment. These findings are relevant to public health campaigns and education programmes.

A survey exploring respondents’ views and knowledge about mild cognitive impairment (MCI) was circulated via UK networks. A total of 417 respondents completed the survey, including people living with cognitive impairment (n = 10), care partners (n = 23), older adults (n = 83), younger adults (n = 83), general health-care professionals (n = 96), dementia specialist health-care professionals (n = 48) and dementia specialists (n = 40).

Respondents were more confident in their knowledge about dementia than cognitive impairment but wanted more information about both conditions. Younger adults were uncertain about many aspects of MCI, and were the most likely to view MCI as a normal part of ageing. Diet (45.1%, n = 188) and personal behaviour (63.8%, n = 266) were the least endorsed possible causes of MCI, suggesting a lack of awareness of lifestyle choices as risk factors for MCI.

The results highlight the need to provide education and awareness raising about MCI to enable people to seek help in a timely manner and be able to make informed lifestyle choices that may reduce their risk of MCI and dementia. Implementing education about MCI and dementia in schools is a key target, as younger people were the most uncertain or misinformed about these topics. It is clear that further public health initiatives around MCI are both warranted and welcomed by the general public.

The paper aims to empirically test a framework to predict the desire and intention to engage with an elective health-care procedure and implement a methodology to test the anticipated positive and negative emotions in hedonic adaptation to an elective procedure.

Two studies in USA and Australia (N = 1,200) confirmed the psychometric properties of the key constructs under the chemical peel condition. Two further studies in the USA and Australia (N = 1,100) explored the research question and hypotheses in the adapted model of goal-directed behaviour under the Botox condition. A survey was self-administered to online panels who had previously engaged in such elective procedures.

The findings highlighted the pragmatic implications for communication and activation strategies to safeguard consumer interests and retain their loyalty.

From the authors’ best understanding, neither a methodology nor a theoretical framework exists to explore hedonic adaptation to recurring engagement with elective health care. A methodology and theoretical framework will highlight the mood states and factors that predict desire and intention to engage. This can advance the research on hedonic adaptation and decision-making and offer pragmatic suggestions for communication and activation strategies to safeguard consumer interests and retain their loyalty.

This study explores the causes of delayed mandatory annual report filings of private companies in Estonia.

The authors use an online survey targeting companies that had submitted annual reports for 2017 late (late-filers) or failed to submit these by July 2020 (non-filers). The responses of 492 late-filers and 122 non-filers are analysed with exploratory factor analysis, Mann–Whitney U-Test and logistic regression.

Annual report filing decisions of both, late-filers and non-filers, are strongly driven by administrative costs attached to the preparation and submission of reports with non-filers perceiving these to be significantly greater. The relevance of other disclosure-related costs and benefits remains similar for both late-filers and non-filers. While proprietary and privacy concerns remain rather unimportant, benefits of timely disclosure, in the form of access to financing and possibilities to continue ordinary business activities, remain important disclosure timing drivers.

Policy interventions should focus on preventive measures that hinder companies' ordinary business activities in case of non-compliance to reporting deadlines. Monetary sanctions can be used to strengthen the desired behaviour alongside broader clarification of the purpose of mandatory reporting and available exemptions.

The authors propose an empirically testable comprehensive one-period model of disclosure timing decisions of private companies differentiating late-filers and non-filers. The authors address the limitations of previous studies through a survey that allows the authors to draw direct inferences about the trade-offs between different decision drivers and the motivations behind managers' disclosure timing decisions.