Search results

The noise and dust particles caused by the construction transport are by most stakeholders experienced as disturbing. The purpose of this study is to explore how sonification can support visualization in construction planning to decrease construction transport disturbances.

This paper presents an interdisciplinary research project, combining research on construction logistics, internet of things and sonification. First, a data recording device, including sound, particle, temperature and humidity sensors, was implemented and deployed in a development project. Second, the collected data were used in a sonification design, which was, third, evaluated with potential users.

The results showed that the low-cost sensors used could capture “good enough” data, and that the use of sonification for representing these data is interesting and a possible useful tool in urban and construction transport planning.

There is a need to further evolve the sonification design and better communicate the aim of the sounds used to potential users. Further testing is also needed.

This study introduces new ideas of how to support visualization with sonification planning the construction work and its impact on the vicinity of the site. Currently, urban planning and construction planning focus on visualizing the final result, with little focus on how to handle disturbances during the construction process.

Showing the potentials of using low-cost sensor data in sonification, and using sonification together with visualization, is the result of a novel interdisciplinary research area combination.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

To assess the introduction and performance of light electric freight vehicles (LEFVs), more specifically cargo cycles in major 3PL organizations in at least two Nordic countries.

Case studies. Interviews. Company data on performance before as well as after the introduction. Study of differing business models as well as operational setups.

The results from the studied cases show that LEFVs can compete with conventional vans in last mile delivery operations of e-commerce parcels. We account for when this might be the case, during which circumstances and why.

Inherent limitations of the case study approach, specifically on generalization. Future research to include more public–private partnership and multi-actor approach for scalability.

Adding to knowledge on the public sector facilitation necessary to succeed with implementation and identifying cases in which LEFVs might offer efficiency gains over more traditional delivery vehicles.

One novelty is the access to detailed data from before the implementation of new vehicles and the data after the implementation. A fair comparison is made possible by the operational structure, area of delivery, number of customers, customer density, type of packages, and to some extent, the number of packages being quite similar. Additionally, we provide data showing how city hubs can allow cargo cycles to work synergistically with delivery vans. This is valuable information for organizations thinking of trying LEFVs in operations as well as municipalities/local authorities that are interested.

Dust (particulate matters) is very dangerous to our health as it is not visible with our naked eyes. Emissions of dust concentrations in the natural environment can occur mainly by road traffic, constructions and dust generating working environments. The purpose of this paper is to assess the ambient dust pollution status and to find out the association between PM concentrations and other determinant factors such as wind speed, ambient temperature, relative humidity and traffic congestion.

A cross-sectional study was conducted for two consecutive months (June and July, 2016) at a residential site (Defence Services Liver Hospital, Mingaladon) and a commercial site (Htouk-kyant Junction, Mingaladon) based on WHO Air Quality Reference Guideline Value (24-hour average). Hourly monitoring of PM2.5 and PM10 concentration and determinant factors such as traffic congestion, wind speed, ambient temperature and relative humidity for 24 hours a day was performed in both study sites. CW-HAT200 handheld particulate matters monitoring device was used to assess PM concentrations, temperature and humidity while traffic congestion was monitored by CCTV cameras.

The baseline PM2.5 and PM10 concentrations of Mingaladon area were (28.50±11.49)µg/m³ and (52.69±23.53)µg/m³, means 61.48 percent of PM2.5 concentration and 54.92 percent of PM10 concentration exceeded than the WHO reference value during the study period. PM concentration usually reached a peak during early morning (within 3:00 a.m.-5:00 a.m.) and at night (after 9:00 p.m.). PM2.5 concentration mainly depends on traffic congestion and temperature (adjusted R²=0.286), while PM10 concentration depends on traffic congestion and relative humidity (adjusted R²=0.292). Wind speed played a negative role in both PM2.5 and PM10 concentration with r=−0.228 and r=−0.266.

The air quality of the study area did not reach the satisfiable condition. The main cause of increased dust pollution in the whole study area was high traffic congestion (R²=0.63 and 0.60 for PM2.5 and PM10 concentration).

Government-owned companies (GOCs), such as ports, have engaged in efforts to become more sustainable. Most of such efforts have been technological and policy ones and mainly focusing on the environment, with limited research on organisational change management. This paper aims to provide insights into how ports have been addressing sustainability change forces and pressures.

Twelve semi-structured interviews were conducted with top-level directors and sustainability managers, representing ports across Europe’s maritime regions and a range of port types and sizes. The interviews were analysed using grounded theory’s constant comparative analysis.

The findings highlighted that the ports’ success in their process to become more sustainable depends on how they take advantage of the thrust forces and reduce the drag ones. The findings serve to develop the “ports’ sustainability change management framework”, with five stages: reactive, proactive, transactive, interactive, and sustainable port.

Ports, and other GOCs, should capitalise on their private–public nature in their contribution to making societies more sustainable by adopting a holistic perspective and interactive changes.

This paper provides a dynamic perspective on corporate sustainability efforts, particularly on GOCs, through organisational change management complementing technocentric and managerial approaches.

The purpose of this work is to optimize the monitoring of vibrations on dynamometric test rigs for railway brakes. This is a quite demanding application considering the continuous increase of performances of high-speed trains that involve higher testing specifications for brake pads and disks.

In this work, authors propose a mixed approach in which relatively simple finite element models are used to support the optimization of a diagnostic system that is used to monitor vibration levels and rotor-dynamical behavior of the machine. The model is calibrated with experimental data recorded on the same rig that must be identified and monitored. The whole process is optimized to not interfere with normal operations of the rig, using common inertial sensor and tools and are available as standard instrumentation for this kind of applications. So at the end all the calibration activities can be performed normally without interrupting the activities of the rig introducing additional costs due to system unavailability.

Proposed approach was able to identify in a very simple and fast way the vibrational behavior of the investigated rig, also giving precious information concerning the anisotropic behavior of supports and their damping. All these data are quite difficult to be found in technical literature because they are quite sensitive to assembly tolerances and to many other factors. Dynamometric test rigs are an important application widely diffused for both road and rail vehicles. Also proposed procedure can be easily extended and generalized to a wide value of machine with horizontal rotors.

Most of the studies in literature are referred to electrical motors or turbomachines operating with relatively slow transients and constant inertial properties. For investigated machines both these conditions are not verified, making the proposed application quite unusual and original with respect to current application. At the same time, there is a wide variety of special machines that are usually marginally covered by standard testing methodologies to which the proposed approach can be successfully extended.

The purpose of this paper is to investigate the role of distinct types of heating technology and their price impact in German residential real estate markets, considering a wide range of other housing market determinants. The authors aim to test and to verify specifically, whether the obsolescence of heating technology leads to a significant price discount and whether higher technological standards (and environmental friendliness) come with a price premium on the market.

The authors create housing market models for rental and sales segments by constructing generalized additive models with explicit multi-layered spatial components. To elaborate a profound and contemporary answer using these models, the authors perform large-sample regression analyses based on more than 400,000 observations covering German residential properties in 2015.

First and foremost, the heating system indeed shows significant explanatory importance for measuring housing rents and purchasing price. Second, the authors find that it makes a difference whether clean “green” technologies are implemented or whether “brown” systems with obsolete technology or fossil energy sources is on hand. Ultimately, the authors conclude that while low energy consumption indeed comes with a price premium, this needs to be interpreted together with the property’s heating type, as housing markets seem to outweigh the “green premium” by “brown discounts” if low energy consumption figures are powered by a certain type of heating technology system.

Aside of a possible omitted variable bias, the main research limitation is constituted by the integration of asking prices in the analysis, as actual transaction prices are not systematically transparent on national level in Germany. Limitations are discussed at the end of the paper.

This work supports investors who face the challenge of making environmental- and energy-related decisions as well as appraisers who deliver financial fundamentals for such. Third, the paper supports both asset managers as well as investment strategists in argumentation pro-environmental investments beyond all ecological necessity.

This paper contributes to the current discussion on climate change and the eclectic role of real estate in this context. The authors deliver evidence on pricing effects as a measure of socioeconomic acceptance of progressive heating technology and environmental friendliness as an imperative of twenty-first century societies.

This is the first study on “green premiums” or “brown discounts” that includes heating technology as a potential and distinct driver of value and rents. It is a contemporary contribution and delivers original information on the quantitative impact of contemporary and anachronistic technology in heating to researchers as well as investors and appraisers.

Public authorities are required to organise new facilities to respond to changed user demands in terms of a public-owned school. The number of pupils attending the case study school will increase in the following years, as will the number of children attending a day nursery located on the present campus. In addition, the users of the campus have complained of building-related symptoms. This study aims to understand the municipal decision-making process in organising the school’s facilities, in particular, the factors used for decreasing uncertainty around a project.

This study is a case study undertaken through an action research approach. The researchers participated in the project planning meetings concerning the future activities to take place in the building.

Over a 13-month period, multiple stakeholders participated in the project planning meetings providing a deeper understanding of the space demands posed, current challenges and opportunities offered by the existing building. In addition, the alternative solutions generated were evaluated. The problem identification and information gathering periods lasted over nine months, which was far longer than predicted. Thus, generating alternative solutions and evaluation of the solutions also delayed. As the entire process was delayed substantially, the final decision on organising the facilities was not made during this research.

This research may be of practical value for a property owner and a project team for decision-making concerning changed facility demands.

This paper provides information about how public authorities are making decisions on facility organisation during conditions of uncertainty.

Simulation-based optimisation (SO) is a popular optimisation approach for building and civil engineering construction planning. However, in the framework of SO, the simulation is continuously invoked during the optimisation trajectory, which increases the computational loads to levels unrealistic for timely construction decisions. Modification on the optimisation settings such as reducing searching ability is a popular method to address this challenge, but the quality measurement of the obtained optimal decisions, also termed as optimisation quality, is also reduced by this setting. Therefore, this study aims to develop an optimisation approach for construction planning that reduces the high computational loads of SO and provides reliable optimisation quality simultaneously.

This study proposes the optimisation approach by modifying the SO framework through establishing an embedded connection between simulation and optimisation technologies. This approach reduces the computational loads and ensures the optimisation quality associated with the conventional SO approach by accurately learning the knowledge from construction simulations using embedded ensemble learning algorithms, which automatically provides efficient and reliable fitness evaluations for optimisation iterations.

A large-scale project application shows that the proposed approach was able to reduce computational loads of SO by approximately 90%. Meanwhile, the proposed approach outperformed SO in terms of optimisation quality when the optimisation has limited searching ability.

The core contribution of this research is to provide an innovative method that improves efficiency and ensures effectiveness, simultaneously, of the well-known SO approach in construction applications. The proposed method is an alternative approach to SO that can run on standard computing platforms and support nearly real-time construction on-site decision-making.

This study aims to investigate patterns in international travel behavior of scientific staff depending on the categories of gender, scientific field and scientific seniority level. The learning from salient differences possibly revealed may inform measures for reducing travel greenhouse gas (GHG) emissions, especially for high-emitting staff groups, and help strengthen the equality between scientists of different categories concerning their travel behavior.

The study collected and used novel empirical data on travel GHG emissions from University of Graz scientific staff for five consecutive years (2015–2019) and used statistical analysis and inference to test and answer three distinct research questions on patterns of travel behavior.

The travel footprint of scientific staff, in terms of annual GHG emissions per scientist, exhibits various highly significant differences across scientific fields, seniority and gender, such as male senior natural scientists showing ten times higher per-person emissions than female junior social scientists.

The five-year travel GHG emissions data set across all fields from natural sciences via social sciences to humanities at a large university (Uni Graz, Austria, about 2,000 scientific staff) and across seniority levels from predocs to professors, both for female and male scientists, enabled a robust empirical study revealing distinct differences in travel GHG footprints of academic staff. In this way, the study adds valuable insights for higher research institutions toward effective GHG reduction policies.