Search results

Disaster management and humanitarian logistics (HT) play crucial roles in large-scale events such as earthquakes, floods, hurricanes and tsunamis. Well-organized disaster response is crucial for effectively managing medical centres, staff allocation and casualty distribution during emergencies. To address this issue, this study aims to introduce a multi-objective stochastic programming model to enhance disaster preparedness and response, focusing on the critical first 72 h after earthquakes. The purpose is to optimize the allocation of resources, temporary medical centres and medical staff to save lives effectively.

This study uses stochastic programming-based dynamic modelling and a discrete-time Markov Chain to address uncertainty. The model considers potential road and hospital damage and distance limits and introduces an a-reliability level for untreated casualties. It divides the initial 72 h into four periods to capture earthquake dynamics.

Using a real case study in Istanbul’s Kartal district, the model’s effectiveness is demonstrated for earthquake scenarios. Key insights include optimal medical centre locations, required capacities, necessary medical staff and casualty allocation strategies, all vital for efficient disaster response within the critical first 72 h.

This study innovates by integrating stochastic programming and dynamic modelling to tackle post-disaster medical response. The use of a Markov Chain for uncertain health conditions and focus on the immediate aftermath of earthquakes offer practical value. By optimizing resource allocation amid uncertainties, the study contributes significantly to disaster management and HT research.

The Middle East and North Africa (MENA) region is known for its extreme weather conditions during Summer. A major determinant of the sustainability of the design of a building is its fenestrations. The purpose of this paper is to explore the problem of designing and locating windows on building facades such that a number of relevant criteria to the MENA region are optimised, including solar heat gain, privacy, daylighting and cost of installation.

A multi-objective optimisation problem is proposed with the focus on capturing the requirements of residential dwellings in the MENA region. Since the problem contains conflicting objectives that need to be optimised, a lexicographic approach is adopted. In order to display the Pareto curve, a bi-objective analysis based on the ε-constraint method is utilised.

The conflicting nature of the proposed problem is indicated via the Pareto optimal solutions yielded. Depending on the preference of criteria adopted in lexicographic optimisation, the location of the windows on the building façade tends to change. The bi-objective analysis indicates the importance of balancing out the daylight factor against each of privacy, solar heat gain and installation cost criteria. Furthermore, an analysis conducted in three major cities in the MENA region highlights the discrepancy in design alternatives generated depending on the local climatic condition.

This work proposes a novel mathematical optimisation model which focuses on producing a sustainable design and layout for windows on the facades of residential dwellings located in the MENA region. The proposed model provides designers with guidance through an automated support tool that yields optimised window designs and layout to ensure the sustainability of their designed buildings.

The purpose of this paper is to show how the EStra-Many method works on optimization problems characterized by high-dimensionality of the objective space. Moreover, a comparison with a more classical approach (a constrained bi-objective problem solved by means of NSGA-II) is done.

The six reactances of a compensation network (CN) for a wireless power transfer system (WPTS) are synthesized by means of an automated optimal design. In particular, an evolutionary algorithm EStra-Many coupled with a sorting strategy has been applied to an optimization problem with four objective functions (OFs). To assess the obtained results, a classical genetic algorithm NSGA-II has been run on a bi-objective problem, constrained by two functions, and the solutions have been analyzed and compared with the ones obtained by EStra-Many.

The proposed EStra-Many method identified a solution (CN synthesis) that enhances the WPTS, considering all the four OFs. In particular, to assess the synthesized CN, the Bode diagram of the frequency response and a circuital simulation were evaluated a posteriori; they showed good performance of the CN, with smooth response and without unwanted oscillations when fed by a square wave signal with offset. The EStra-Many method has been able to find a good solution among all the feasible solutions, showing potentiality also for other fields of research, in fact, a solution nondominated with respect to the starting point has been identified. From the methodological viewpoint, the main finding is a new formulation of the many-objective optimization problem based on the concept of degree of conflict, which gives rise to an implementation free from hierarchical weights.

The new approach EStra-Many used in this paper showed to properly find an optimal solution, trading-off multiple objectives. The compensation network so synthesized by the proposed method showed good properties in terms of frequency response and robustness. The proposed method, able to deal effectively with four OFs, could be applied to solve problems with a higher number of OFs in a variety of applications because of its generality.

Throughout human history, the occurrence of disasters has been inevitable, leading to significant human, financial and emotional consequences. Therefore, it is crucial to establish a well-designed plan to efficiently manage such situations when disaster strikes. The purpose of this study is to develop a comprehensive program that encompasses multiple aspects of postdisaster relief.

A multiobjective model has been developed for postdisaster relief, with the aim of minimizing social dissatisfaction, economic costs and environmental damage. The model has been solved using exact methods for different scenarios. The objective is to achieve the most optimal outcomes in the context of postdisaster relief operations.

A real case study of an earthquake in Haiti has been conducted. The acquired results and subsequent management analysis have effectively assessed the logic of the model. As a result, the model’s performance has been validated and deemed reliable based on the findings and insights obtained.

Ultimately, the model provides the optimal quantities of each product to be shipped and determines the appropriate mode of transportation. Additionally, the application of the epsilon constraint method results in a set of Pareto optimal solutions. Through a comprehensive examination of the presented solutions, valuable insights and analyses can be obtained, contributing to a better understanding of the model’s effectiveness.

This study aims to investigate the feasibility of employing a multi-objectives integer-programming model for effective allocation of resources for cyberfraud mitigation. The formulated objectives are the minimisation of the total allocation cost of the anti-fraud capacities and the maximisation of the forensic accounting capacities in all cyberfraud incident prone spots.

From the literature survey conducted and primary qualitative data gathered from the 17 licenced banks in South Africa on fraud investigators, the suggested fraud investigators are the organisation’s finance department, the internal audit committee, the external risk manager, accountants and forensic accountants. These five human resource capacities were considered for the formulation of the multi-objectives integer programming (MOIP) model. The MOIP model is employed for the optimisation of the employed capacities for cyberfraud mitigation to ensure the effective allocation and utilisation of human resources. Thus, the MOIP model is validated by a genetic algorithm (GA) solver to obtain the Pareto-optimum solution without the violation of the identified constraints.

The formulated objective functions are optimised simultaneously. The Pareto front for the two objectives of the MOIP model comprises the set of optimal solutions, which are not dominated by any other feasible solution. These are the feasible choices, which indicate the suitability of the MOIP to achieve the set objectives.

The results obtained indicate the feasibility of simultaneously achieving the minimisation of the total allocation cost of the anti-fraud capacities, or the maximisation of the forensic accounting capacities in all cyberfraud incident prone spots – or the trade-off between them, if they cannot be reached simultaneously. This study recommends the use of an iterative MOIP framework for decision-makers which may aid decision-making with respect to the allocation and utilisation of human resources.

The originality of this work lies in the development of multi-objectives integer-programming model for effective allocation of resources for cyberfraud mitigation.

The purpose of this paper is to present a Design for Additive Manufacturing (DfAM) methodology that connects several methods, from geometrical design to post-process selection, into a common optimisation framework.

A design methodology is formulated and tested in a case study. The outcome of the case study is analysed by comparing the obtained results with alternative designs achieved by using other design methods. The design process in the case study and the potential of the method to be used in different settings are also discussed. Finally, the work is concluded by stating the main contribution of the paper and highlighting where further research is needed.

The proposed method is implemented in a novel framework which is applied to a physical component in the case study. The component is a structural aircraft part that was designed to minimise weight while respecting several static and fatigue structural load cases. An addition goal is to minimise the manufacturing cost. Designs optimised for manufacturing by two different AM machines (EOS M400 and Arcam Q20+), with and without post-processing (centrifugal finishing) are considered. The designs achieved in this study show a significant reduction in both weight and cost compared to one AM manufactured geometry designed using more conventional methods and one design milled in aluminium.

The method in this paper allows for the holistic design and optimisation of components while considering manufacturability, cost and component functionality. Within the same framework, designs optimised for different setups of AM machines and post-processing can be automatically evaluated without any additional manual work.

Project-driven supply chain risks pose a significant threat to the success of complex development projects, in terms of achieving key performances such as quality, time and efficiency. The purpose of this paper is to adopt a supply chain quality perspective in order to explore and better understand the unique attributes of risks associated with project-driven supply chains for continuously improving the quality of both processes and products.

Theoretically grounded in the framework of Bayesian Belief Networks and Game theory, this paper develops a structured process for assessing and managing risks in project-driven supply chains. The application of the proposed approach is demonstrated through a simulation case study conducted on the development project of Boeing 787 aircraft.

The conflicting incentives amongst stakeholders in a supply chain can jeopardise the success of a project and therefore, assessment of this category of risks classified as “Game theoretic risks” needs special consideration. Project-driven supply chain risks pose a significant threat to the success of complex projects. The results of the study clearly revealed that without mitigating the game theoretic risks, the main objective of timely completion of the Boeing 787 project was not materialised. Further, the lack of management expertise was the major factor contributing to the overall project costs including cost of quality.

The proposed process and analyses present a significant and original insight in terms of capturing the key determinants of both product and service quality such as product performance, convenience and reliability of service, timeliness, ease of maintenance, flexibility, and customer satisfaction and comfort. Propositions are developed for ascertaining the significance of information sharing in a project-driven supply chain, and a fair sharing partnership is introduced to help supply chain managers in managing game theoretic risks in order to achieve the goals of quality, time and efficiency.

Optimisation of daylight admission through window is crucial for alleviating glare while maintaining useful daylight levels in order to enhance occupants' health, visual comfort and moderating lighting energy consumption. Amongst various solutions, fixed external shade is an affordable solution for housing spaces that need to be sophisticatedly designed, especially during the period of increasing home spaces as working environments. In the humid subtropical region, daylight control plays an important role in indoor comfort, particularly with areas with a high window to wall ratio (WWR). Due to the insufficient amount of such study on non-office spaces in Australia, shading-related standards are not addressed in Australian building codes.

The chosen methodology for the research is a quantitative data collection and analysis through field measurement and simulation simultaneously. The first step is a multi-objective optimisation of shading elements through a non-dominated sorting genetic algorithm (NSGA-II) on parametric modelling via Rhino3D CAD and simulation engines (DIVA and ClimateStudio). In the second phase, the Pareto front solutions are validated by experimental measurements within a room with a single north-facing window (the most probable for the daytime glare in Sydney) for the seven most common local window configurations.

Through the simulation of ten genes, 1,560 values and 2.4 × 1,019 of search space, this study found an optimum shade for each local common window layout, resulted in +22% in (UDI) and −16% in views with discomfort glare on average. Moreover, an all-purpose polygonal shade showed an average of 4.6% increase in UDI and a 5.83% decrease in the percentage of views with discomfort glare.

The findings are subject to the room dimensions, window dimensions and layouts, and orientation of windows for selected residential buildings in Sydney.

The study contributes to the development of highly accurate fixed external shading systems with rectangular and tapered-form external shapes. A real-time measurement by luminance-metre sensors and HQ cameras located at six eye levels is conducted to corroborate simulation results of the visual comfort.