Search results

A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body and quality evaluation. This paper aims to discuss the aforementioned idea.

First, the differential body is set on a rotation platform before measuring. Then one laser sensor called as “primary sensor”, is installed on the intern of the differential body. The spherical surface and four holes on the differential body are sampled by the primary sensor when the rotation platform rotates one revolution. Another sensor called as “secondary sensor”, is installed above to sample the external cylinder surface and the planar surface on the top of the differential body, and the external cylinder surface and the planar surface are high in manufacturing precision, which are used as datum surfaces to compute the errors caused by the motion of the rotation platform. Finally, the sampled points from the primary sensor are compensated to improve the measurement accuracy.

A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body. Based on the characteristics of the measurement data, a gradient image-based method is proposed to distinguish different objects from laser measurement data. A case study is presented to validate the measurement principle and data processing approach.

The study investigates the possibility of correction of sensor data by the measurement results of multiple sensors to improving measurement accuracy. The proposed technique enables the error analysis and compensation by the geometric correlation relationship of various features on the measurand.

The proposed error compensation principle by using multiple sensors proved to be useful for the design of new measurement device for special part inspection. The proposed approach to describe the measuring data by image also is proved to be useful to simplify the measurement data processing.

The relevance of this research is determined by the fact that the creation of innovative goods and services involves a set of marketing activities to assess the market situation. Intellectual leadership becomes the basis of strategic foresight. Understanding the horizon of opportunities for an industrial enterprise reflects the trends in the evolutionary development of industry markets and their respective competencies. The formation of key competencies contributes to the elimination of marketing myopia. In this regard, the authors identified changes in the main trends in consumer demand. The research aims to build a client-centric business model in the B2B market. The empirical basis of this research is the statistical data “Indicators of innovative activity: 2022” and the works of S. Yu. Glazyev, N. Nonaka, H. Takeuchi, K. Freeman, and F. Jansen. Based on the method of logical-structural analysis, the authors reveal the essence of the content of the category “innovative development of industry,” give a rationale for the main directions of innovative transformations of the industry based on the implementation of a competency-based approach in management, and determine the patterns of innovative development of industry in the context of building technological sovereignty. The practical significance of this research lies in the fact that strategic business thinking will create a condition for the formation of new functionality (a new product concept), which requires the development of new key competencies and the implementation of a strategy for advanced development.

An alliance portfolio can help latecomer firms to acquire the necessary knowledge and resources to catch up with market leaders. However, how latecomer firms construct an alliance portfolio in terms of the nature of windows of opportunity has not been fully analyzed. This paper aims to explore how latecomer firms can build appropriate coalitions according to the nature of the window of opportunity to achieve technological catch-up in different catch-up phases.

Based on a longitudinal case study from 1984 to 2018 of Sunny Group, now a leading manufacturer of integrated optical components and products, this paper explores the process of technological catch-up of latecomer firms building different types of alliance portfolio in different windows of opportunity.

This paper finds that there is a sequence when latecomers build an alliance portfolio in the process of catch-up. When the uncertainty of opportunity increases, the governance mechanism of the alliance portfolio will change from contractual to equity-based. Also, latecomer firms build market-dominated and technology-dominated alliance portfolios to overcome their market and technology disadvantages, respectively.

These conclusions not only enrich the theory of latecomer catch-up from the perspective of windows of opportunity but also expand research on alliance portfolio processes from a temporal perspective.

This chapter details a practice-based investigation of a 19th-century astronomical device known as ‘Janssen’s apparatus’. It questions traditional narratives of linear technological advancement and ‘sole inventor’ to reframe the historical artefact as a site which makes visible a network of technological knowledge interconnecting astronomy and visual culture. Approached from this perspective, the Janssen artefact is reframed as an ‘intersite of knowledge’, exploring how the various know-how contained within the device is located across disciplines rather than within a single field. Originally developed to calculate the Astronomical Unit during the 1874 Transit of Venus, Janssen’s apparatus failed in its endeavour as a measuring instrument, but its motion mechanism was successfully adapted into early cinema technologies. This chapter applies praxis through the development of a prototype artwork and the concept of ‘techne’ as speculative means of understanding how this mechanism was transferred from astronomy to the Western cultural realm. It proposes that the development of the apparatus was partially gleaned from moving image techniques already in use within 19th-century visual culture. The development of the prototype artwork is discussed in relation to the specific timing mechanism of the Janssen apparatus and how it establishes its own ‘intersite of knowledge’ relevant to its contemporary context. Finally, this chapter elaborates on how witnessing the Janssen mechanism in motion provided unique insight and how creating a dialogue between historical and contemporary apparatus facilitates a reconsideration of how galleries, libraries, archives, and museums [GLAM] and other host institutions that contain artefacts might share their hidden stories.

The purpose of this paper is to evaluate the dosimetric properties of N-(3-methoxypropyl) acrylamide (NMPA) polymer gel dosimeter using UV-vis spectrophotometry as a simple and low-cost method.

The gel samples have been irradiated to various doses using a medical linear accelerator with 6 MV beam energy. The optical density of un-irradiated and irradiated NMPA polymer gel dosimeters in terms of absorbance at 500 nm was investigated by UV-vis spectrophotometry.

The absorbance values of the gel samples were increased linearly with increasing dose in the dose range between 2 and 20 Gy. A remarkable improvement in the dose response was noticed after the addition of various concentrations of glycerol. The impact of dose rate, beam energy and the post-stability of the exposed gels was studied and found consistent with the previous study using nuclear magnetic resonance results (energy independent and dose rate independent, stable up to one week).

The results of the independent experimental spectrophotometry and nuclear magnetic resonance analyses indicate that the NMPA polymer gel dosimeter has good and consistent dosimetric features for radiotherapy dosimetry.

The ionizing radiation-induced polymerization of gel samples leads to a change in the absorbance of the irradiated gel samples. This study introduces the first characterization of NMPA gel dosimeter by means of UV-vis spectrophotometer.

As Czech export is widely considered the key to the economic development of Czechia, this chapter explores the relationship between microeconomic profitability among companies in selected TOP10 export industries and the macroeconomic development of the export itself. An investigation was carried out to compare the differences caused by the COVID-19 pandemic. In addition, the comparison is developed according to the size and concentration of ownership among exporting companies. Annual data are obtained from the Bureau van Dijk Orbis database to analyse profitability among 4,283 companies in 10 NACE industries from 2012 to 2021. We have obtained encouraging results, demonstrating that not only those less profitable companies affected export development. However, in general, our results emphasise the importance of those less profitable medium-sized companies for Czech export, within the manufacture of machinery and equipment, and the manufacture of motor vehicles in particular.

This study aims to extend the known design guidelines for the polymer-based fused filament fabrication (FFF) 3D printing process with the focus on function-integrated components, specifically optomechanical parts. The potential of this approach is demonstrated by manufacturing function-integrated optomechanics for a low-power solid-state laser system.

For the production of function-integrated additively manufactured optomechanics using the FFF process, essential components and subsystems have been identified for which no design guidelines are available. This includes guidelines for integrating elements, particularly optics, into a polymer structure as well as guidelines for printing functional threads and ball joints. Based on these results, combined with prior research, a function-integrated low-power solid-state laser optomechanic was fabricated via the FFF process, using a commercial 3D printer of the type Ultimaker 3. The laser system's performance was assessed and compared to a reference system that employed commercial optomechanics, additionally confirming the design guidelines derived from the study.

Based on the design goal of function integration, the existing design guidelines for the FFF process are systematically extended. This success is demonstrated by the fabrication of an integrated optomechanic for a solid-state laser system.

Based on these results, scientists and engineers will be able to use the FFF process more extensively and benefit from the possibilities of function-integrated manufacturing.

Extensive research has been published on additive manufacturing of optomechanics. However, this research often emphasizes only cost reduction and short-term availability of components by reprinting existing parts. This paper aims to explore the capabilities of additive manufacturing in the production of function-integrated components to reduce the number of individual parts required, thereby decreasing the workload for system assembly and leading to an innovative production process for optical systems. Consequently, where needed, it provides new design guidelines or extends existing ones and verifies them by means of test series.

Aluminium alloys can be used as lightweight and high-strength materials in combination with the technology of laser beam welding, an efficient joining method, in the manufacturing of automotive parts. The purposes of this paper are to conduct laser welding experiments with Al2024 in the lap joint configuration, model the laser welding process parameters of Al2024 alloys and use propounded models to optimize the process parameters.

Laser welding of Al2024 alloy has been conducted in the lap joint configuration. Then, the influences of explanatory variables (laser peak power, scanning speed and frequency) on outcome variables (weld width [WW], throat length [TL] and breaking load [BL]) have been investigated with Poisson regression analysis of the data set derived from experimentation. Thereafter, a multi-objective genetic algorithm (MOGA) has been used using MATLAB to find the optimum solutions. The effects of various input process parameters on the responses have also been analysed using response surface plots.

The promulgated statistical models, derived with Poisson regression analysis, are evinced to be well-fit ones using the analysis of deviance approach. Pareto fronts have been used to demonstrate the optimization results, and the maximized load-bearing capacity is computed to be 1,263 N, whereas the compromised WW and TL are 714 µm and 760 µm, respectively.

This work of conducting laser welding of lap joint of Al2024 alloy incorporating the Taguchi method and optimizing the input process parameters with the promulgated statistical models proffers a neoteric perspective that can be useful to the manufacturing industry.

Weak regional commercial and productive integration and monetary dependence on the economic poles are evidence of the consolidation of Latin America's peripheral position in the world economy. This research analyzes different monetary initiatives launched individually or collectively by countries in the region to alleviate this position, such as the petro, the SUCRE, or El Salvador's bet on the legal acceptance of bitcoin as a payment instrument. After identifying some of their limitations, we propose some basis for monetary coordination with which to advance in the dynamization of productivity and trade complementarity of the countries of the region.

The purpose of this paper is to examine the effect of the financial structure on innovation.

We utilize the matched firm-level data from two sources: the World Bank Enterprise Survey and the Innovation Follow-Up Survey. A total of 3,664 firms from 11 African countries are included.

The authors find a financially constrained and low technology-intensive firm that uses internal finance more than its peers is less likely to innovate. Our results also show that a firm that uses new equity and debt finance more than its peers is more likely to innovate. The results particularly suggest the significant effect of bank and trade credit finance on firms’ innovation. The extent and, in some cases, the direction of the effect of dependence on internal finance, new equity finance and debt finance on innovation vary due to the heterogeneity in firm size, age and ownership status. Corporate innovation is also associated with firm size, R&D, cooperation, staff training, public support, exportation and group membership.

The management of companies, particularly financially constrained firms, should reduce their dependence on internal finance, which negatively affects their innovation. As a remedy, they could improve their reliance on new equity finance and debt finance, especially bank finance and trade credit finance, which positively affect their innovativeness.

A pending policy task for African business leaders is to design and evaluate reforms that help create strong financial sectors willing to provide capital to a broad range of firms, particularly small and young firms.

This study adds new evidence to the recent surge of debate on the trade-off between going public, using debt or heavily using internal sources to finance innovative projects, and which of these is more important in promoting firm-level innovation.