Search results

The purpose of this study is to develop an integrated model for the stochastic multiproject scheduling and material ordering problems, where some of the prominent features of offshore projects and their environmental-degrading effects have been embraced as well. The durations of activities are uncertain in this model. The developed formulation is tri-objective that seeks to minimize the expected time, total cost and CO₂ emission of all projects.

A new version of the multiobjective multiagent optimization (MOMAO) algorithm has been proposed to solve the amalgamated model. To empower the MOMAO, various procedures of this algorithm have been modified based on the multiattribute utility theory (MAUT) technique. Along with the MOMAO, this study has employed four other meta-heuristic methodologies to solve the model as well.

The outputs of the MOMAO have been put to test against four other optimizers in terms of convergence, diversity, uniformity and computation times. The results of the Mean Ideal Distance (MID) metric have revealed that the MOMAO has strongly prevailed its rival optimizers. In terms of diversity of the acquired solutions, the MOMAO has ranked the first among all employed optimizers since this algorithm has offered the best solutions in 56.66 and 63.33% of the test problems regarding the diversification metric and hyper-volume metrics. Regarding the uniformity of results, which is measured through the spacing metric (SP), the MOMAO has presented the best SP values in more than 96% of the test problems. The MOMAO has needed more computation times in comparison to its rivals.

A real case study comprising two concurrent offshore projects has been offered. The proposed formulation and the MOMAO have been implemented for this case study, and their effectiveness has been appraised.

Very few studies have focused on presenting an integrated formulation for the stochastic multiproject scheduling and material ordering problems. The model embraces some of the characteristics of the offshore projects which have not been adequately studied in the literature. Limited capacities of the offshore platforms and cargo vessels have been embedded in the proposed model. The offshore platforms have spatial limitations in storing the required materials. The vessels are also capacitated and they also have limited shipment capacities. Some of the required materials need to be transported from the base to the offshore platform via a fleet of cargo vessels. The workforces and equipment can become idle on the offshore platform due to material shortage. Various offshore-related costs have been integrated as a minimization objective function in the model. The cargo vessels release CO₂ detrimental emissions to the environment which are sought to be minimized in the developed formulation. To the best of the authors' knowledge, the MOMAO has not been sufficiently employed as a solution methodology for the stochastic multiproject scheduling and material ordering problems.

This study aims to focused on conducting a comprehensive assessment of the technology readiness level (TRL) of Iran’s oil field intelligence compared to other countries with similar oil reservoirs. The ultimate objective is to optimize oil extraction from this field by leveraging intelligent technology. Incorporating intelligent technology in oil fields can significantly simplify operations, especially in challenging-to-access areas and increase oil production, thereby generating higher income and profits for the field owner.

This study evaluates the level of maturity of present oil field technologies from the perspective of an intelligent oil field by using criteria for measuring the readiness of technologies. A questionnaire was designed and distributed to 18 competent oil industry professionals. Using weighted criteria, a mean estimate of oil field technical maturity was derived from the responses of respondents. Researchers evaluated the level of technological readiness for Brunei, Kuwait and Saudi Arabia’s oil fields using scientific studies.

None of the respondents believe that the intelligent oil field in Iran is highly developed and has a TRL 9 readiness level. The bulk of experts believed that intelligent technologies in the Iran oil industry have only reached TRL 2 and 1, or are merely in the transfer phase of fundamental and applied research. Clearly, Brunei, Kuwait and Saudi Arabia have the most developed oil fields in the world. In Iran, academics and executive and contracting firms in the field of intelligent oil fields are working to intelligently develop young oil fields.

This study explores the level of maturity of intelligent technology in one of Iran’s oil fields. It compares it to the level of maturity of intelligent technology in several other intelligent oil fields throughout the globe. Increasing intelligent oil fields TRL enables better reservoir management and causes more profit and oil recovery.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

Gas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF₆), to enable a higher dielectric strength compared to e.g. air. However, under high voltage direct current conditions, charge accumulation and electric field stress may occur, which may lead to partial discharge or system failure. Therefore, numerical simulations are used to design the system and determine the electric field and charge distribution. Although the gas conduction shows a more complex current–voltage characteristic compared to solid insulation, the electric conductivity of the SF₆ gas is set as constant in most works. The purpose of this study is to investigate different approaches to address the conduction in the gas properly for numerical simulations.

In this work, two approaches are investigated to address the conduction in the insulating gas and are compared to each other. One method is an ion-drift-diffusion model, where the conduction in the gas is described by the ion motion in the SF₆ gas. However, this method is computationally expensive. Alternatively, a less complex approach is an electro-thermal model with the application of an electric conductivity model for the SF₆ gas. Measurements show that the electric conductivity in the SF₆ gas has a nonlinear dependency on temperature, electric field and gas pressure. From these measurements, an electric conductivity model was developed. Both methods are compared by simulation results, where different parameters and conditions are considered, to investigate the potential of the electric conductivity model as a computationally less expensive alternative.

The simulation results of both simulation approaches show similar results, proving the electric conductivity for the SF₆ gas as a valid alternative. Using the electro-thermal model approach with the application of the electric conductivity model enables a solution time up to six times faster compared to the ion-drift-diffusion model. The application of the model allows to examine the influence of different parameters such as temperature and gas pressure on the electric field distribution in the GIL, whereas the ion-drift-diffusion model enables to investigate the distribution of homo- and heteropolar charges in the insulation gas.

This work presents numerical simulation models for high voltage direct current GIL, where the conduction in the SF₆ gas is described more precisely compared to a definition of a constant electric conductivity value for the insulation gas. The electric conductivity model for the SF₆ gas allows for consideration of the current–voltage characteristics of the gas, is computationally less expensive compared to an ion-drift diffusion model and needs considerably less solution time.

The combination of an Engineered Cementitious Composite (ECC) layer and steel plate to reinforce RC beams (ESRB) is a new strengthening method. The ESRB was proposed based on the steel plate at the bottom of RC beams, aiming to solve the problem of over-reinforced RC beams and improve the bearing capacity of RC beams without affecting their ductility.

In this paper, the finite element model of ESRB was established by ABAQUS. The results were compared with the experimental results of ESRB in previous studies and the reliability of the finite element model was verified. On this basis, parameters such as the width of the steel plate, thickness of the ECC layer, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar were analyzed by the verified finite element model. Based on the load–deflection curve of ESRB, ESRB was discussed in terms of ultimate bearing capacity and ductility.

The results demonstrate that when the width of the steel plate increases, the ultimate load of ESRB increases to 133.22 kN by 11.58% as well as the ductility index increases to 2.39. With the increase of the damage degree of the original beam, the ultimate load of ESRB decreases by 23.7%–91.09 kN and the ductility index decreases to 1.90. With the enhancement of the cross-sectional area of longitudinal tensile rebar, the ultimate bearing capacity of ESRB increases to 126.75 kN by 6.2% and the ductility index elevates to 2.30. Finally, a calculation model for predicting the flexural capacity of ESRB is proposed. The calculated results of the model are in line with the experimental results.

Based on the comparative analysis of the test results and numerical simulation results of 11 test beams, this investigation verified the accuracy and reliability of the finite element simulation from the aspects of load–deflection curve, characteristic load and failure mode. Furthermore, based on load–deflection curve, the effects of steel plate width, ECC layer thickness, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar on the ultimate bearing capacity and ductility of ESRB were discussed. Finally, a simplified method was put forward to further verify the effectiveness of ESRB through analytical calculation.

The UAE is among the fastest-growing facilities management (FM) markets globally. Nevertheless, conclusive evidence on this market is scarce in the literature. Therefore, this paper aims to provide an in-depth insight into the FM market in the UAE.

Fourteen interviewees were purposively selected to provide insight into FM status through their field experiences. A SWOT analysis of their answers held place.

Interviewees revealed that the main trends of FM in the UAE include interests in sustainability, integration of technology, health and safety, outsourcing FM, switching to total facilities management (TFM), and performance management systems use. Besides, the quality of the service in the FM market is driven by the real-estate boom, services sophistication, the increasing awareness of FM and focus on the quality of services. Furthermore, the interviews found that the recruitment of poorly skilled labors can threaten the FM market to meet the allocated budget, misperception of FM, the value of money, the lack of continuous follow-up with recent advancements in technologies and the lack of performance measurement models.

This paper highlights the major trends, drivers and threats of the FM market in the UAE, and the implications of its findings can direct FM organizations and researchers in their practices.

Corrosion is a major concern for many industries that use metals as structural or functional materials, and the use of corrosion inhibitors is a widely accepted strategy to protect metals from deterioration in corrosive environments. Moreover, the toxic nature, non-biodegradability and price of most conventional corrosion inhibitors have encouraged the application of greener and more sustainable options, with natural and synthetic drugs being major actors. Hence, this paper aims to stress the capability of natural and synthetic drugs as manageable and sustainable, environmentally friendly solutions to the problem of metal corrosion.

In this review, the recent developments in the use of natural and synthetic drugs as corrosion inhibitors are explored in detail to highlight the key advancements and drawbacks towards the advantageous utilization of drugs as corrosion inhibitors.

Corrosion is a critical issue in numerous modern applications, and conventional strategies of corrosion inhibition include the use of toxic and environmentally harmful chemicals. As greener alternatives, natural compounds like plant extracts, essential oils and biopolymers, as well as synthetic drugs, are highlighted in this review. In addition, the advantages and disadvantages of these compounds, as well as their effectiveness in preventing corrosion, are discussed in the review.

This survey stresses on the most recent abilities of natural and synthetic drugs as viable and sustainable, environmentally friendly solutions to the problem of metal corrosion, thus expanding the general knowledge of green corrosion inhibitors.

An interaction between emerging technologies (ETs) for facility management (FM) activities and stakeholder skills is necessary to promote the optimization of FM performance. Previous studies do not show strategies for the selection of ETs in FM considering the technological competencies of stakeholders. Thus, this study analyzes the interactions between ETs and FM from the perceptions of Brazilian professionals, identifying the most appropriate and effective technological solutions, based on a broad literature review.

The steps of the methodology are as follows: systematic literature review (SLR); detailing the ETs for FM; online questionnaire based on SLR findings; sample of Brazilian FM professionals; statistical treatment; and discussion.

Results indicate wireless sensor network, Internet of Thing, building information modeling and Big Data as ETs in FM with greater potential for optimization in the performance of FM activities, from survey respondents.

The scope of possible findings may have been biased, considering the small number of research participants and current transformations resulting from the COVID-19 pandemic (e.g. changes to standard operating procedures).

The results ensure greater security to facility managers in the effective implementation of ETs in FM activities.

The research explores the published studies and the consultation with Brazilian FM professionals in the selection of ETs.

This study aims to answer two questions: (a) what obstacles and opportunities do Chinese female entrepreneurs face when doing business? And (b) how do they negotiate their entrepreneurial careers and gender identities in different gender-segregated markets?

This study uses qualitative research methods of participant observation and in-depth interviews with 41 female entrepreneurs in China and the theoretical lenses of gender role theory and doing gender in entrepreneurship.

The study findings reveal that Chinese female entrepreneurs face different obstacles and opportunities in gender-segregated industries. Their experiences vary in industries that are mainly occupied by males and females. On the one hand, women in female-dominated industries may be supported by a feminine working environment that is coherent with their domestic roles. However, they may also be questioned on the cultural impurity implied in some industries, which harms their class-based feminine virtue. On the other hand, women in male-dominated industries may be challenged and marginalized due to their gender. However, some find ways to turn the disadvantaged feminine characters into favourable conditions and break out of the stereotypical gender constraints in doing business.

This study contributes to the literature on gender and entrepreneurship in general. More specifically, it contributes to the study of doing gender in gender-segregated markets, and it also illustrates women’s gendered opportunities and constraints in Chinese society that are affected by the long-lasting traditional gender norms.

This paper aims to propose a robust method for non-rigid point set registration, using the Gaussian mixture model and accommodating non-rigid transformations. The posterior probabilities of the mixture model are determined through the proposed integrated feature divergence.

The method involves an alternating two-step framework, comprising correspondence estimation and subsequent transformation updating. For correspondence estimation, integrated feature divergences including both global and local features, are coupled with deterministic annealing to address the non-convexity problem of registration. For transformation updating, the expectation-maximization iteration scheme is introduced to iteratively refine correspondence and transformation estimation until convergence.

The experiments confirm that the proposed registration approach exhibits remarkable robustness on deformation, noise, outliers and occlusion for both 2D and 3D point clouds. Furthermore, the proposed method outperforms existing analogous algorithms in terms of time complexity. Application of stabilizing and securing intermodal containers loaded on ships is performed. The results demonstrate that the proposed registration framework exhibits excellent adaptability for real-scan point clouds, and achieves comparatively superior alignments in a shorter time.

The integrated feature divergence, involving both global and local information of points, is proven to be an effective indicator for measuring the reliability of point correspondences. This inclusion prevents premature convergence, resulting in more robust registration results for our proposed method. Simultaneously, the total operating time is reduced due to a lower number of iterations.