Search results

In the present study, the thermal performance of engine radiator using conventional coolant and nanofluid is determined experimentally for the different flow rates. Further, the study implemented the Integrated Taguchi-GRA-PCA for optimising the heat transfer performance.

Nanofluids were prepared by taking ethylene glycol and water (25:75 by volume) with volume fraction of 0.01, 0.03 and 0.05% of TiO₂ nanopowder. Experimental Data were collected based on the design of experiments (DOE) L9 orthogonal array using Taguchi method. Statistical analysis via Grey relation analysis (GRA) and principal component analysis (PCA) were done to determine the role of experimental parameters on heat transfer coefficient and rate of heat transfer. Impact of three control factors, vol. % of TiO₂ concentration (φ), flow rate (LPH), and sonication time (min) on the performance characteristics on heat transfer coefficient and ratio of heat transfer rate is analysed to get the best combination of the parameters involved.

Analysis revealed the importance of parameters on heat transfer coefficient and can be sorted in terms of contributions from higher to lower degree. Finally, ANOVA test has been conducted to validate the effect of process parameters. The major controllable parameter is φ (concentration), contributing about 32.74%, then flow rate contributing 32.5% and finally sonication time showing small contribution of 18.57%.

A grey relational analysis integrated with principal component analyses (PCA) are implemented to get the optimum heat transfer coefficient and ratio of heat transfer rate. The novelty of the work is to adopt and implement the Integrated Taguchi-GRA-PCA first time for the purpose of thermal performance analysis of engine nano-coolant for radiator.

With respect to two new subjects, i.e. nanofluids and microchannels, in heat transfer systems and modern techniques used for building them, this paper aims to study on effect of using aluminum oxide nanoparticles in non-Newtonian fluid of aqueous solution of carboxy-methyl cellulose in microtube and through application of different slip coefficients to achieve various qualities on surface of microtube.

Simultaneously, the effect of presence of nanoparticles and phenomenon of slip and temperature jump has been explored in non-Newtonian nanofluid in this essay. The assumption of homogeneity of nanofluid and fixed temperature of wall in microtube has been used in modeling processes.

The results have been presented as diagrams of velocity, temperature and Nusselt Number and the investigations have indicated that addition of nanoparticles to the base fluid and increase in microtube slip coefficient might improve rate of heat transfer in microtube.

The flow of non-Newtonian nanofluid of aqueous solution of carboxy methyl cellulose-aluminum oxide has been determined in a microtube for the first time.

The purpose of this paper is to analyze numerically the nanofluid natural convection inside a square enclosure with two L-shaped heaters using lattice Boltzmann method.

An environmentally friendly nanofluid, clove-treated graphene nanoplatelet (CGNP), is used to study the enhancement of heat transfer. Six various heaters configurations are considered and effects of nanoparticle concentration (0–0.1%) and Rayleigh number (10^3–10^6) on streamlines, isothermal lines and heat transfer parameters are studied. The developed computational code has been validated using mesh sensitivity analysis and numerical data of other authors.

It is observed that in contrast to distilled water, CGNP/water nanofluid is an efficient coolant and the Nusselt number is increased as the nanoparticle concentration and Rayleigh numbers increment. The nanoparticle concentration cannot change the flow pattern inside the enclosure. However, the Rayleigh number and heaters configuration can change the flow pattern significantly. Several heaters configurations (Cases 1–4) related to the symmetry of geometrical shape and corresponding boundary conditions, illustrate the symmetry of streamlines and isotherms about the vertical line (X = 0.5). The formation of vortices inside the enclosure is affected by the raising heat plume above the heaters. Moreover, at different Rayleigh numbers, the relative magnitude of average Nu for various cases is different. At Ra = 103, the energy transport characteristic depends on the relative location of heaters and cold walls, and the order of average Nusselt number is Case 3 ˜ Case 4 ˜ Case 6 > Case 1 ˜ Case 2 ˜ Case 5. However, at Ra = 106, an influence of thermal convection mechanism on heat transfer is significant and the ranking of average Nusselt number is Case 1 ˜ Case 4 > Case 5 > Case 6 > Case 2 > Case 3.

The originality of the research lies in both the study of thermogravitational convection in a closed chamber with two L-shaped heaters, and the analysis of the influence of control parameters for an environmentally friendly nanoliquid on electronics cooling process.

The purpose of this study is to provide a numerical investigation of Casson nanofluid along a vertical nonlinear stretching sheet with variable thermal conductivity and viscosity.

The boundary-layer equations are presented in the dimensionless form using proper non-similar transformations. The subsequent non-dimensional nonlinear partial differential equations are solved using the implicit finite difference technique. To linearize the nonlinear terms present in these equations, the quasilinearization technique is used.

The investigation showed graphically the temperature, velocity and nanoparticle volume fraction for particular included physical parameters. It is observed that the velocity profile decreases with an increase in the values of Casson fluid parameter while increases with an increase in the viscosity variation parameter. The temperature profile enhances for large values of velocity variation parameter and thermal conductivity parameter while it reduces for large values of thermal buoyancy parameter. Further, the Nusselt number and skin-friction coefficient are introduced which are helpful in determining the physical aspects of Casson nanofluid flow.

The immediate control of heat transfer in the industrial system is crucial because of increasing energy prices. Recently, nanotechnology is proposed to control the heat transfer phenomenon. Ongoing research in complex nanofluid has been fruitful in various applications such as solar thermal collectors, nuclear reactors, electronic equipment and diesel–electric conductor. A reasonable amount of nanoparticle when added to the base fluid in solar thermal collectors serves to deeper absorption of incident radiation, and hence it upgrades the efficiency of the solar thermal collectors.

The non-similar solution of Casson nanofluid due to a vertical nonlinear stretching sheet with variable viscosity and thermal conductivity is discussed in this work.