Search results

Based on the conceptual design of seismic resistance in buildings, this study aims to put forward a new construction structure energy-saving block structure with invisible multiribbed frame.

The structure is composed of energy-saving block wall panels with invisible multiribbed frames, lightweight partition wall plates and cast-in-place reinforced concrete floor slabs. The structure design is simple and the construction is convenient and fast. The comprehensive economic index of the structure is better than that of brick-and-concrete composite construction. The self-weight of the energy-saving blocks that make up the wall is only about 25% of that of solid clay bricks. The thermal insulation and energy-saving effects of the structure can meet the national energy-saving requirements of buildings.

This new structure meets the requirements of national technology and economy, wall deformation, thermal insulation and energy-saving, and can be used mainly for multistory and mid- to high-rise residential buildings. For the core components of the new structure energy-saving block and invisible multiribbed frame composite wall, as the axial compression ratio increases in the test parameters range, the peak bearing capacity and ductility of the wall increase and the initial stiffness of the wall decreases. The axial compression ratio has a significant effect on the energy dissipation capacity of the wall. The displacement ductility coefficients ν are all greater than 2, indicating the optimal seismic performance of the wall.

This structure is a new, economical, lightweight, energy-saving, seismic resistant, multistory and mid- to high-rise structure that fully conforms to national conditions.

This study aims to explore and analyze the disparities in the distribution of housing types and characteristics among households in Saudi Arabia, taking into consideration the regional perspective.

This study uses quantitative data obtained from the General Authority for Statistics, specifically from the Saudi 2022 Statistical Census. The data were analyzed using descriptive statistics (percentages) as well as inferential statistics, including correlation analysis (Pearson correlation) and t-tests.

The study found a distinct preference among Saudis for villas, with 85.3% choosing this housing type, while only 14.7% of non-Saudis opted for villas. The statistical analysis confirmed the significance of housing type for Saudi citizens (t = 2.561, p = 0.037), while non-Saudis did not show a statistically significant preference (t = 1.703, p = 0.132). The Pearson correlation results revealed a moderate positive correlation (r = 0.641, p = 0.009) between regional landmass and the number of houses, and a very strong positive relationship (r = 0.984) between population and the number of houses across the 13 regions. As expected, with increasing population, there was a significant increase in the number of houses (p = 0.001).

This study fills a research gap by investigating regional disparities in housing characteristics in Saudi Arabia. The findings are valuable for policymakers, housing developers and the housing market in understanding these disparities. The insights from this research can inform decision-making to promote equitable access to housing types and foster social inclusivity in the housing sector.

This study aims to investigate the interrelationship between critical design criteria (CDC) that affect health, well-being and productivity (i.e. WELL) for residential buildings in developing countries, using Malaysia as a case study. To achieve the aim, the objectives are to identify CDC that affect WELL collectively; determine CDC that affect health, well-being, and productivity simultaneously; and analyze the interrelationship between the CDC.

Data from the semi-structured interviews and a systematic review of the existing literature were gathered for survey development. Next, survey data was collected from 114 professionals living in multistory buildings. Finally, normalized mean analysis, analytic hierarchy process (AHP), agreement analysis and Spearman correlation analysis were used to analyze the collected data.

Out of the 51 potential design criteria, 16 are critically affecting WELL collectively. Furthermore, six are critically affecting WELL collectively as well as health, well-being and productivity simultaneously: property price, water flow and supply, water treatment, pest management, management services and waste management. Finally, “water treatment” is highly correlated to “water management” and “water flow and supply.” In addition, “waste management” and “management services,” as well as “fire safety” and “emergency evacuation plans,” are highly correlated.

This study's originality includes investigating the CDC of residential buildings for the first time, to the best of the authors’ knowledge, in a developing country. As a result, this study uncovers holistic design criteria for policymakers to establish holistic building assessment tools for residential buildings.

This research proposes a viable method of slab and shore load computation for the partial striking technique utilized in high-rise construction projects to optimize the use of horizontal formwork. The proposed Partial Striking Simplified Method (PSSM) is designed to be utilized by industry practitioners to schedule the construction operations of casting floors in order to control the formwork costs incurred throughout the completion of a project.

The article presents the PSSM for calculating slab and shore loads in multi-story building construction. It introduces the concept of “clearing before striking,” where shore supports are partially removed after a few days of pouring fresh concrete. The PSSM procedure is validated through numerical analysis and compared to other simplified approaches. Additionally, a user-friendly Python program based on the PSSM procedure is developed to explore the capability of the PSSM procedure and is used to study the variations in slab load, shoring level, concrete grade and cycle time.

The study successfully developed a more efficient and reliable method for estimating the loads on shores and slabs using partial striking techniques for multi-story building construction. Compared to other simplified approaches, the PSSM procedure is simpler and more precise, as demonstrated through numerical analysis. The mean of shore and slab load ratios are 1.08 and 1.07, respectively, which seems to have a slight standard deviation of 0.29 and 0.21 with 3D numerical analysis. The Python program developed for load estimation is effective in exploring the capability of the proposed PSSM procedure. The Python program's ability to identify the floor under maximum load and determine the specific construction stage provides valuable insights for multi-story construction, enabling informed decision-making and optimization of construction methods.

High-rise construction in Indian cities is booming, though this trend is not shared by all the country's major metropolitan areas. The growing construction sector in urban cities demands rapid construction for efficient utilization of formwork to control the construction costs of project. The proposed procedure is the best option to optimize the formwork construction cost, construction cycle time, the suitable formwork system with optimum cost, concrete grade for the adopted level of shoring in partaking and many more.

The proposed PSSM reduces the calculation complexity of the existing simplified method. This is done by considering the identical slab stiffness and identical shore layout for uniform load distribution throughout the structure. This procedure utilizes a two-step load distribution calculation for clearing phase. Initially, the 66% prop load of highest floor level is distributed uniformly over the lower interconnected slabs. In the second step, the total prop load is removed equally from all slabs below it. This makes the load distribution user-friendly for the industry expert.

Cross-laminated timber (CLT) is an innovative construction material that provides a balanced mix of structural stiffness, fabrication flexibility and sustainability. CLT development and innovation diffusion require close collaborations between its supply chain architectural, engineering, construction and manufacturing (AECM) stakeholders. As such, the purpose of this study is to provide a preliminary understanding of the knowledge diffusion and innovation process of CLT construction.

The study implemented a longitudinal social network analysis of the AECM companies involved in 100 CLT projects in the UK. The project data were acquired from an industry publication and decoded in the form of a multimode project-company network, which was projected into a single-mode company collaborative network. This complete network was filtered into a four-phase network to allow the longitudinal analysis of the CLT collaborations over time. A set of network and node social network analysis metrics was used to characterize the topology patters of the network and the centrality of the companies.

The study highlighted the scale-free structure of the CLT collaborative network that depends on the influential hubs of timber manufacturers, engineers and contractors to accelerate the innovation diffusion. However, such CLT supply collaborative network structure is more vulnerable to disruptions due to its dependence on these few prominent hubs. Also, the industry collaborative network’s decreased modularity confirms the maturity of the CLT technology and the formation of cohesive clusters of innovation partners. The macro analysis approach of the study highlighted the critical role of supply chain upstream stakeholders due to their higher centralities in the collaborative network. Stronger collaborations were found between the supply chain upstream stakeholders (timber manufacturers) and downstream stakeholders (architects and main contractors).

The study contributes to the field of industrialized and CLT construction by characterizing the collaborative networks between CLT supply chain stakeholders that are critical to propose governmental policies and industry initiatives to advance this sustainable construction material.

This study aims to explore occupants’ perceived importance and satisfaction with high-rise students’ housing facilities’ fire safety considerations (FSCs). The specific objectives are to explore the FSCs for high-rise students’ housing facilities and assess the level of importance and satisfaction with the FSCs provided in high-rise students’ housing facilities in controlling fire outbreaks.

The study uses an exploratory sequential design with an initial qualitative phase followed by a quantitative data collection phase. Twenty FSCs were identified through the qualitative phase via semistructured interviews. Their importance and satisfaction were revealed through survey questionnaires with 168 respondents who stayed in or were involved in the operation of high-rise students’ housing facilities. Data from the qualitative phase were analyzed thematically, and those obtained from the quantitative phase were analyzed descriptively and inferentially.

The study’s findings revealed that all the 20 FSCs identified via the qualitative phase and confirmed through the quantitative phase were perceived to be very important in fighting fires in high-rise students’ housing facilities. However, only 9 out of the 20 FSCs received some satisfaction among the respondents in fighting fires in the facilities.

This study offers insight into a rare study area, especially in sub-Saharan Africa. In addition, it grants insight into the occupants’ perspective regarding which FSCs they consider essential and their level of satisfaction with such FSCs in fighting fires in high-rise students’ housing facilities.

Formwork design and construction for reinforced concrete buildings take significant time, effort and money. Construction procedures are time-consuming for designers and costly for the contractor. Poor engineering decisions have led to several workplace accidents in the construction industry. This paper aims to present an integrated building information modeling – genetic algorithm (BIM-GA) model to automate formwork design, 3D visualization and optimization.

Data are precisely extracted from a 3D structural model and used to optimize formwork design based on available formwork components and prices. Optimization models are made using GA approach. A library of 3D formwork components was modeled and stored using Revit. The optimized design solution thereafter would be visualized automatically in Revit to readily acquire formwork quantities schedules and shop drawings.

A case study illustrating the proposed approach demonstrated that using BIM will reduce formwork design, quantification and drawing time by more than 50% of the traditional approach with safer design and accurate results due to process automation and optimize cost for the given data.

This research introduces an innovative integrated BIM and GA model for the optimization and automation of slab formwork design, which has significantly benefited the construction industry. The utilization of GA in the optimization process allows for the attainment of an optimal formwork design, ultimately leading to a reduction in construction cost and time.

This research explores the role of concrete 3D printing (C3DP) in the development of culturally appropriate housing in Indigenous Reserves in Canada through the design, building and evaluation of the Star Lodge project located in the Siksika Nation of Alberta, Canada. The project aims to assess the potential of C3DP in addressing the escalating housing demands in Indigenous communities in Canada.

The research involved a collaborative and multidisciplinary approach, engaging Blackfoot Elders, Knowledge Keepers from the Siksika Nation, Siksika Housing and Nidus3D. Central to this was the design, build and documentation of the Star Lodge project to analyse the advantages and challenges, guided by weekly meetings and site visits.

The project harnessed C3DP to streamline construction, enhance durability, reduce maintenance costs and enhance the energy performance of the homes. Notable time savings were achieved compared to conventional construction methods. Challenges included developing strategies to overcome extreme cold weather conditions, achieving a consistent concrete mix and integrating conventional construction elements such as drywall construction in interiors. The project served as a platform for collaboration and community participation, shaping the design and construction process while raising awareness of innovative construction techniques in the community.

This study provides an evidence-based framework for the evaluation of C3DP technology by analysing the Star Lodge Project, the first C3DP project in Alberta and the largest of its kind in Canada. By addressing housing challenges in Indigenous communities, the research holds broader implications for sustainable development and Indigenous empowerment across Canada.

The purpose of this study is to outline the process, procedures and techniques used for digitization and digital preservation of theses and dissertations (TDs) collection at the Central Library of Quaid-I-Azam University, Pakistan.

Since the phenomenon under investigation is exploratory in nature, a case study qualitative paradigm was used to conduct this study.

The findings of the study offer a brief overview of the cost-effective solution that leveraged in-house expertise for the digital preservation of TDs. This led to the establishment of a knowledge repository hosting a substantial collection of approximately 25,857 electronic theses and dissertations, accessible online since August 2023. This project digitally preserved approximately 9,387 TDs on CDs/DVDs, and scanned about 15,000 print TDs, comprising around 1,399,244 pages. The cost incurred per page, including labor and rent of a photocopy machine, was just Rs 0.548 making it a cost-effective technique. The total cost incurred for this process was just 0.768m Pakistani rupees (equivalent to $2,509.55). The findings revealed key challenges, including administrative, financial, technical and copyright issues, that impede the effective execution of the project.

This case study is limited to one Pakistani public sector university library. This case study holds significance in terms of practical insights and implications for academic institutions and library administrators in other developing countries like Pakistan, which have similar economic, social and technical circumstances.

To the best of the authors’ knowledge, this is the first-ever study conducted to elucidate the cost-effective strategy adopted for digitally preserved TDs without additional financial and human resources while creating a knowledge repository.

This study aims to examine the transaction costs (TCs) involved in searching for a business case to adopt specific walling innovations by housing developers and the influence of these TCs on their adoption outcomes. This is against the backdrop that innovation adoption, like any new venture, is failure-prone but necessary for countries to reap the full benefits of technological innovation in residential developments, especially when these innovations are also green. Moreover, this issue is understudied.

The study uses a qualitative design and focuses on the early adopting developers in Ghana. The original theoretical framework integrates theories on entrepreneurial opportunity discovery and TC economics. The authors interviewed 12 developers and 13 industry stakeholders purposively identified. The authors analysed and triangulated the resulting transcripts using thematic analysis techniques.

The authors identified two types of early adopters who attempted eight types of walling innovations. Most efforts (71%) were partially successful or failed. The range of TCs identified differed by the adopter type, technology and knowledge coordination strategy. Although the common TCs that were consequential were associated with monitoring and supervision, construction, additional learning, acquiring specialised skills, design change and dispute resolutions, their influence on adoption outcomes is very nuanced.

To the best of the authors’ knowledge, this paper is among the first to link TCs with innovation adoption outcomes by housing developers in discovering profitable opportunities to adopt specific walling innovations. The findings and theoretical framework lay a foundation for in-depth analyses of the entrepreneurship of innovation adoption in residential real estate. The exploratory work will generate further interest in this area.