Search results

The purpose of this paper is to investigate thermal protection provided by the fire fighting fabric systems with different layer under high-level thermal hazards with a typical temperature range of 800-1,000°C. The purpose of these fabric systems was to provide actual protection against burn injuries using garments worn by industrial workers, fire fighters and military personnel, etc.

The fabric system was consist of glass with aluminum foil as an outer layer, non-woven basalt, non-woven glass fabric containing NaCl-MgCl₂ and Galactitol phase change materials (PCM) which simulate multilayer fire fighter protective clothing system. Thermal protective performance tests were applied for thermal analysis and used as an attempt to quantify the insulating characteristics of fabrics under conditions of flash over temperature. The surface of fire fighting multilayer protective fabric has been characterized using the UV-Vis-NIR (ultraviolet-visible-near infrared) spectrophotometer

The clothing shows good thermal insulation and high-temperature drop during flash over environment and avoid second degree burn. The current PCM obvious advantages such as the ability to work in high temperature, high efficiency a long period of practical performance.

Using this design of composite multilayer technology incorporating two stages of PCM may provide people with better protection against the fire exposure and increasing the duration time which was estimated to be more than five minutes to prevent burn injuries.

The purpose of this paper is to provide the details of developments to researchers in test apparatus and evaluation methods to rate the thermal protective performance (TPP) of firefighters’ clothing under high-temperature and high-humidity condition.

This review paper describes the influence laws of moisture on thermal protection and the moisture distribution in actual fire environment. Different evaluation methods used for assessing the effect of moisture on the TPP were investigated, with an emphasis on test devices, evaluation indexes as well as their relationship and limitations.

The moisture from the ambient, clothing and human perspiration plays an important role in determining the TPP of firefighter protective clothing. It is obvious that research on moisture-driven heat transfer in firefighter’s clothing system are comparatively little, primarily focussing on pre-wetted methods of multi-layer fabric. Further studies should be conducted to develop more standardized moistening systems and improve the current calculation methods for evaluating the performance of protective clothing. New explorations for heat and moisture transfer mechanism in protective clothing should be investigated.

Protective clothing is the efficient way to provide fire-fighting occupational safety. To accurately evaluate the TPP of protective clothing under high-temperature and high-humidity condition will help to optimize the clothing performance and choose the proper clothing for providing firefighters with the best protection under multiple thermal hazards.

This paper is offered as a concise reference for scientific community further research in the area of the TPP evaluation methods under high-temperature and high-humidity condition.

The purpose of this paper is to measure the thermal insulation of protective clothing with multilayer gaps in low-level heat exposures.

Nine different combinations of protective clothing systems with multiple air gaps are used to measure the thermal insulation by a self-designed bench-scale test apparatus in different levels of an external thermal radiation of 2-10 kW/m2. The outside and inside surface temperatures of each fabric layer are also measured to calculate the local thermal insulation of each fabric layer and each air gap.

The results show that the total thermal insulation of protective clothing under thermal radiation is less than that in normal environments, and the exposed thermal radiation will worsen the total thermal insulation of the multilayer fabric systems. Air gap plays a positive role in the total thermal insulation, and thus provides the enhanced thermal protection. It is also suggested that the local resistance of the air gap closer to the external thermal radiation is more easily affected by the thermal radiation, due to the different heat transfer ways in the fabric system and the external thermal radiation.

Effects of air gap on the thermal insulation of protective clothing, and contribution of the local thermal resistance of each fabric layer and each air gap to the total thermal insulation.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this paper is to provide the details of developments to research works in the distribution characteristics of the air gaps within firefighters’ clothing and research methods to evaluate the effect of air gaps on the thermal protective performance of firefighters’ clothing.

In this paper, the distribution of air gaps within firefighters’ clothing was first analyzed, and the air gaps characteristics were summarized as thickness, location, heterogeneity, orientation and dynamics. Then, the evaluation of the air gap on the thermal protective performance of fighters’ clothing was reviewed for both experimental and numerical studies.

The air gaps within clothing layers and between clothing and skin play an important role in determining the thermal protective performance of firefighters’ protective clothing. It is obvious that research works on the effects of actual air gaps entrapped in firefighters’ clothing on thermal protection are comparatively few in number, primarily focusing on static and uniform air gaps at the fabric level. Further studies should be conducted to define the characteristic of air gap, deepen the understand of mechanism of heat transfer and numerically simulate the 3D dynamic heat transfer in clothing to improve the evaluation of thermal protective performance provided by the firefighters’ clothing.

Air gaps within thermal protective clothing play a crucial role in the protective performance of clothing and provide an efficient way to provide fire-fighting occupational safety. To accurately characterize the distribution of air gaps in firefighters’ clothing under high heat exposure, the paper will provide guidelines for clothing engineers to design clothing for fighters and optimize the clothing performance.

This paper is offered as a concise reference for researchers’ further research in the area of the effect of air gaps within firefighters’ clothing under thermal exposure.

Examines the sixteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the twelfth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.