Search results

The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain suggestions for the development of green packaging.

In this study, software Simapro was used to calculate and analyze the whole life cycle of pallets from the stage of raw materials and production to processing and waste disposal.

A total of 12 environmental categories were used to quantitatively analyze the environmental impact of the four different pallets. The results showed that, regardless of raw material, processing, or waste stage, the environmental impact of wooden pallet was lower than that of plastic pallet. Wooden pallet was better than plastic pallets.

This study compared and analyzed the pallet of 1 × 1.2m with different materials.

Green packaging is the development trend of the future packaging, which follows the principle of 3R1D. According to the calculation results, corresponding suggestions can be put forward from production, processing, using, wasting and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impact, such as global warming potential, water scarcity, can be reduced through different solutions such as the use of green materials, good processing techniques and higher recycling rates.

With the development of science and technology, more creators are trying to use new crafts to represent the cultural trends of the social media era, which makes cultural heritage innovative and new genres emerge. This compels the academic community to examine craft from a new perspective. It is very helpful to understand the hidden representational structure of craft more deeply and improve the craft innovation system of cultural and creative products that we deconstruct the craft based on Complex Network and discover its intrinsic connections.

The research crawled and cleaned the craft information of the top 20% products on the Forbidden City’s cultural and creative products online and then performed Complex Network modeling, constructed three craft representation networks among function, material and technique, quantified and analyzed the inner connections and network structure of the craft elements, and then analyzed the cultural inheritance and innovation embedded in the craft representation networks.

The three dichotomous craft representation networks constructed by combining function, material and technique: (1) the network density is low and none of them has small-world characteristics, indicating that the innovative heritage of the craft elements in the Forbidden City’s cultural and creative products is at the stage of continuous exploration and development, and multiple coupling innovation is still insufficient; (2) all have scale-free characteristics and there is still a certain degree of community structure within each network, indicating that the coupling innovation of craft elements of the Forbidden City’s cultural and creative products is seriously uneven, with some specific “grammatical combinations” and an Island Effect in the network structure; (3) the craft elements with high network centrality emphasize the characteristics of decorative culture and design for the masses, as well as the pursuit of production efficiency and economic benefits, which represent the aesthetic purport of contemporary Chinese society and the ideological trend of production and life.

The Forbidden City’s cultural and creative products should continue to develop and enrich the multi-coupling innovation of craft elements, clarify and continue their own brand unique craft genes, and make full use of the network important nodes role.

The objective of this work is to demonstrate how the use of a business process management (BPM) methodology reinforced with the use of lean manufacturing (LM) tools and practices enhances information and documentation flows.

For this purpose, a case study on a large wind blade manufacturing company is described, in which BPM and LM were combined to improve information and documentation flows associated to the process of quality inspections and quality controls.

The joint use of BPM and LM strongly contributed to the improvement of information and documentation flows. The BPM lifecycle can be used to guide the entire improvement process, while LM tools can be used to act at specific points with an emphasis in the process analysis and implementation phases. Thus, LM complements a BPM approach leading to significant process improvements.

The results show that LM can be used to support some phases of the BPM lifecycle. Furthermore, LM can contribute to identify lean waste in information and documentation flows associated to quality management processes and help in the selection of methods and tools to support process improvements.

This study is one of the first reporting the use of LM tools and practices as complementary to the BPM methodology to support the improvement of information and documentation flows associated to quality management in a large manufacturing company. This research enriches the literature by presenting empirical evidence that these two continuous improvement approaches are not incompatible in their objectives and visions and can complement each other.

This study aims to address sustainability challenges in construction by exploring the structural performance and environmental benefits of incorporating pozzolanic waste glass (WG) into ultra-high-performance reinforced concrete (UHPRC) beams.

A comprehensive evaluation of UHPRC beams was conducted, incorporating varying ratios (10%, 20% and 30%) of WG powder alongside a consistent 0.75% inclusion of basalt fiber. The investigation encompassed the entire UHPRC production process, including curing, casting and molding, while evaluating workability and physical properties. Furthermore, the environmental impact, particularly CO₂ emissions associated with UHPRC mixture components, was also assessed. Type K thermocouples were employed to analyze temperature dynamics during fabrication, providing valuable insights.

The findings demonstrate positive implications for using pozzolanic WG as a cement substitute in UHPRC beams.

This research stands out for its unique focus on the combined effects of incorporating recycled pozzolanic glass waste on the structural performance and environmental footprint of UHPRC beams.

The purpose of this paper is to investigate the effect of mullite on the mechanical properties and friction of carbon fiber (CF)-reinforced friction material.

CF-reinforced friction materials with varying content of mullite were fabricated by hot press molding, and then the tribological properties were tested on the MRH-3-type tribometer under ambient conditions with the ring-on-block configuration.

The experimental results indicated that the addition of mullite increased the density and compressive strength of friction material. However, the flexural strength of friction material decreased by 16% with the addition of 15 Wt.% mullite. The friction coefficient was proportional to the mullite content. Friction material with 12.5 Wt.% mullite showed the highest friction stability under different loads, whereas friction material with 10 Wt.% mullite exhibited the highest friction stability under different sliding speeds.

By boosting the resistance to deformation under load and increasing the specific heat capacity, mullite contributed significantly to the friction stability of the friction material.

Integrating additive manufacturing (AM) tools in traditional mold-making provides complex yet affordable sand molds and cores. AM processes such as selective laser sintering (SLS) and Binder jetting three-dimensional printing (BJ3DP) are widely used for patternless sand mold and core production. This study aims to perform an in-depth literature review to understand the current status, determine research gaps and propose future research directions. In addition, obtain valuable insights into authors, organizations, countries, keywords, documents, sources and cited references, sources and authors.

This study followed the systematic literature review (SLR) to gather relevant rapid sand casting (RSC) documents via Scopus, Web of Science and EBSCO databases. Furthermore, bibliometrics was performed via the Visualization of Similarities (VOSviewer) software.

An evaluation of 116 documents focused primarily on commercial AM setups and process optimization of the SLS. Process optimization studies the effects of AM processes, their input parameters, scanning approaches, sand types and the integration of computer-aided design in AM on the properties of sample. The authors performed detailed bibliometrics of 80 out of 120 documents via VOSviewer software.

This review focuses primarily on the SLS AM process.

A SLR and bibliometrics using VOSviewer software for patternless sand mold and core production via the AM process.

This study aims to examine the effects on student motivation and perception of technological interventions within undergraduate mechanical engineering and product design and manufacture programs at a Sino-foreign international university. The authors use an augmented reality game application within a class on Design for Manufacturing and Assembly (DfMA) that was developed using the approaches of microlearning and digital game-based learning (DGBL).

Structured as design-based research, the study reports on developing innovative educational interventions and provides an empirical investigation of their effectiveness. Data were collected using a mixed methods approach, using pre- and post-tests and questionnaires, together with researcher observations and participant interviews.

Through two rounds of playtests, the game positively affected intrinsic motivation and encouraged higher-order cognitive learning, critical thinking, communication and collaboration. Collaborative learning plays a significant role, DGBL is preferred over traditional methods and microlearning reduces information density and cognitive overload.

The study contributes to our understanding of digital game-based interventions on students’ intrinsic motivation and provides insights into effective ways to design instructional materials in similar teaching and learning settings.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

This study aims to compare and analyze the impact of the commonly used takeout packing (Kraft paper bowl and plastic bowl) through life cycle assessment, then certain suggestions for the development of green packaging could be provided.

In this study, Simapro software was used to calculate and analyze the whole life cycle of takeout packaging from the stage of raw materials, production and processing and waste disposal.

Twelve environmental categories were used to quantitatively analyze the environmental impact of the two different bowls. The results showed that the impact of Kraft paper bowl on the environment was less than that of plastic bowl, regardless of raw material, processing or waste stage. Kraft paper bowl was better than plastic bowl.

This study compared and analyzed the progress of 750-mL bowls made with different materials and specific specifications.

Green packaging is the development trend of the future packaging and follows the principle of reduce, resue, recycle, degradable. According to the calculation results, corresponding suggestions can be put forward from production, processing, use, waste and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impacts, such as global warming potential and water scarcity, can be reduced through different solutions, such as the use of green materials, good processing techniques and higher recycling rates.

The purpose of this article is to investigate the variables affecting heat transfer from the surfaces of a tall building and also the extent of the impact of each of them. Another purpose of this paper is to provide a suitable model for estimating the heat transfer coefficient of the external surfaces of the building according to the impact of variables.

In this study, the Taguchi's approach in the design of the experiments was used to reduce the number of experiments. Percent contributions factors into the overall and surface-averaged Nu of a square prism were obtained by the (ANOVA). The change in Nu by changing either of T, P, angle of attack and V were investigated by the (ANOM). The most significant factors affecting the value Nu were also identified to facilitate the design of thermal systems by eliminating the factors imposing no significant effect on the response in the molding phase. The set of conditions under which the air properties remained unchanged was identified. Five correlations were formulated to predict Nu.

Models used in BES, in which the effects of T, P, A and geometrical effects are not accounted for, are not reliable. The air pressure was found to impose no significant effect on the overall Nu of the considered square prism. Studied in the range of 274–303 K, the air temperature imposed a significant effect on the overall Nu. The results of ANOVA show the significant role of Re to predict Nu of tall buildings.

This article is taken from a doctoral dissertation.