Search results

Effectively solving the large tonnage cable in the construction process due to the tensioning method of the inclined cable often appears in the overall cable force and the design value of the deviation is large, cable internal strand force is not uniform, the main girder stress exceeds the limit of the problem affecting the safety of the structure.

In this study, the finite element method and theoretical analysis method are utilized to propose a construction control method of tensioning the whole bunch of diagonal cables in two parts according to the deformation coordination relationship between the main girder and the diagonal cables. This methodology was implemented during the actual construction of the PAIRA Bridge in Bangladesh.

Tests conducted on cable-stayed bridges using this controlled tensioning method demonstrate that the measured cable strength of a single strand exhibits an error of less than 0.15% compared to the design target cable strength. The deviation between the measured and designed cable forces ranges from 0.16% to 0.27%. Furthermore, no tensile stress is observed in both the top plate and bottom plate of the root section of the main girder, indicating a state of full-section compression throughout the entire construction process.

Through the comparison with the test value, it can be proved that the whole bunch of diagonal cable tensioned in two parts of the construction control method proposed in this paper can make the internal strand force more uniform, to meet the precision requirements of the site construction, to protect the safety of the bridge construction process. The method proposed in this paper is highly accurate, easy to calculate, and has a high value of popularization and application.

This study describes a series of experiments investigating the upper hot layer temperature profile in a confined space under different ventilation conditions for porosity-controlled wood crib fires for pre-flashover conditions.

Full-scale compartment (4 m × 4 m × 4 m) experiments were carried out for four-door openings, i.e. 100%, 75%, 50% and 25% of the total vent area (2 m × 1 m) with the wood crib as a fuel load. The temperature of the upper hot smoke layers of the compartment was recorded with the help of four layers of thermocouples for varying vent areas.

The effect of ventilation on the properties, i.e. mass loss rate, enclosure temperature, heat release rate and carbon monoxide (CO) gas concentration, has been measured and analyzed. The effect of ventilation on heat flux and flame temperature has also been studied. Compartment gas temperature has been examined by five wood crib burning stages: Ignition, growth, steady burning, recess and collapse.

Findings demonstrate that the influence of vent openings varies for the burning parameters and upper layer temperature of the compartment. The current results are beneficial in analyzing thermal risks concerning compartment fire and fire safety engineering projects.

Despite the large number of Indonesian health-care workers working as migrant care workers in Japan, there is a lack of studies that have investigated this phenomenon or assessed the working conditions of Indonesian care workers working in Japanese aged-care facilities. This study aims to explore the work experiences of Indonesian care workers in Japan.

A qualitative descriptive research design was used, and a purposive sample of 18 Indonesian health-care workers (12 nurses and six midwives) who work as care workers in Japan participated in this study. Semistructured interviews were conducted with these participants between December 2022 and January 2023. The data were analyzed using content analysis. The Consolidated Criteria for Reporting Qualitative Research checklist was used to report this study.

Four key themes emerged from the data: easy but mentally challenging, being a care worker is a blessing, working in a partially Muslim-friendly environment and enjoy living: prefer to stay longer.

The work experiences of Indonesian care workers in Japan are complex and multifaceted. By understanding their experiences and needs, the authors can work toward creating more inclusive and supportive workplaces for all.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

The paper investigates how visibility, information technology and innovation management impact sustainability performance. It proposes a framework explaining the role of visibility in driving firms' sustainable performance and the relevance of innovation management and information technologies in enhancing organisational visibility. This study intends to add to the discussion within the management literature about the potential of innovation management to drive sustainability. It seeks to provide insight into the practices that small and medium-sized enterprises (SMEs) can adopt to improve their sustainable performance.

Using empirical methods, the study investigates SMEs in central Mexico. The demographic information in the dataset includes 15 years as an average length of service from firms. Of the surveyed firms, 70% were from the manufacturing sector and 30% were from the service sector, as these are the most representative sectors of the productive region. A variance-based structural equation model approach was used to test the hypotheses, processed with the partial least squares (PLS) regression method.

The research results show that visibility significantly impacts sustainability performance. Innovation management has a higher influence on visibility than information technologies, emphasising the need to improve the quality of information in firms, not just the tools. The findings support managers in comprehending the crucial importance of visibility in aiding firms to achieve higher sustainability performance.

The study only examined a sample of Mexican SMEs; therefore, the findings' generalizability must be considered within this context. Secondly, the survey only focused on services and manufacturing firms and a more detailed analysis of the sector could provide further clarity on the relationships between variables. As a result, future research should consider these limitations and explore additional contexts to improve the overall understanding of the topic. Moreover, the scale used to measure the variables was adapted from other researchers with similar context research and reflective variables.

The results provide helpful information for SME managers about the importance of focusing on innovation management processes and employing information technologies as crucial managerial strategies. This will aid in increasing visibility and supporting the development of sustainability performance in firms.

The world red-code, among others, with climate change and social gaps, has generated the need to contribute to sustainable development, and it has mobilised people on all levels all over the world for the simple purpose of preserving life. Therefore, society, as a crucial group that affects and is affected by this red-code situation, should act in favour of visibility, the use of high-quality information (e.g. transparent, accessible and relevant) and information technologies to promote sustainable practices. This could mean that society should be prepared to incorporate new capabilities and spaces to interchange knowledge as a participatory community that can contribute to better sustainable dynamics that could expand its participation in public decisions. Also, the government should encourage digital democracy (e.g. develop social participation platforms), opening and harmonising rules and mechanisms combining high-quality information with IT to provide flexible and adequate services that support sustainable development, such as efforts towards constructing sustainable and smart cities.

This study explores how innovation management can drive firms' sustainability performance, which is crucial for improving competitiveness. The question of how to enhance sustainability performance through managerial drivers is a critical one. This study empirically investigates the nexus of visibility and sustainability performance, innovation management and information technology with visibility.

In this study, we examine regulated public accessibility to municipalities’ financial reports and bond interest cost. In particular, we examine whether there is information content in a component of a constrained filing period that is useful to municipal bond market participants. The component of a filing period that we focus on is the period of time between an audit report date and a regulated public accessibility date.

To explore our research question, we collect a sample of observations from municipalities that: (1) are required to post annual/audit financial reports on a centralized state-level repository that includes a “transparent” date stamp on when reports are made publicly available and (2) have issued general obligation bonds. Our sample is limited to one observation per municipality. The sample period is 2006–2019. In terms of approach, we use an ordinary least square (OLS) regression model to empirically test whether the time period between municipalities’ audit report date and state-required repository filing date is associated with general obligation bond interest cost.

We find support for the idea that there is information content in a component of a constrained filing period. In particular, we hypothesize and find a positive association between the time period between an audit report date and a state filing date and general obligation bond interest cost. Seemingly, this component of time may provide something unique or not available in other components of a constrained filing period (e.g. the fiscal year-end date to the audit report date). In post hoc analyses, we also find that both components of the constrained filing period in our setting (i.e. the audit report date to state filing date and the fiscal year-end date to audit report date) need to be considered for either of the components to be significant. Moreover, although both components are necessary, the audit report date to state filing date component appears to have a slightly stronger association (in terms of statistical significance) with general obligation bond interest costs.

To our knowledge, Illinois is the only state that provides a date stamp on when municipalities’ financial information is made publicly available on a centralized repository. As such we focus on municipalities in Illinois. While this increases the internal validity of our research, it potentially limits generalizability across other states. Also, as a reflection of the sample constraint, the number of observations in our study is relatively small. As part of post hoc analyses, we take a closer look at our sample, model and variables used to test our hypothesis.

For stakeholders, each component of a constrained filing period may provide unique information. For example, the time period between an audit report date and a regulated filing date may send a positive signal about the quality of financial management to investors. For regulators, requiring some sort of centralized public access to municipal financial reports that have transparent time constraints may help states provide stronger governance and help lower municipalities’ borrowing costs.

We use a novel approach (with the Illinois date stamp filing information) to examine our research question. Most prior research has often relied on an assumption that the time between fiscal year-end and the audit report date is the component of time that provides useful information to investors (e.g. Henke and Maher, 2016). In our setting, we explore and find that a component of a constrained filing time period (i.e. the date from an audit filing to a required public accessibility filing) may also provide impactful information to investors.

The participation of females in economic activity remains a challenge, and received a lot of attention for a better labor policy discourse. The empirical research focused widely on the relationship between female labor force participation (FLFP) and economic development, called the feminization U-shape hypothesis. However, the linear/nonlinear relationship has been questioned due to empirical and methodological anomalies. Hence, this study aims to extend the previous work by reexamining this relationship in Pakistan.

The annual data from 1980 to 2021, the unit root tests augmented Dickey–Fuller and Phillips and Perron, the conventional autoregressive distributed lag bound test approach by including the quadratic-term of GDP per capita and the novel Sasabuchi–Lind–Mehlum (SLM) U test (2010) used for empirical estimation.

The findings revealed the prospects of a long-run nonlinear association between FLFP and economic development in Pakistan. However, an inverse U-shape exists between the female labor force participation rate (FLFPR) and GDP per capita, predicting that FLFP may decline in the future.

The traditional feminization U-shape hypothesis has little empirical support in the case of Pakistan. Therefore, the Government of Pakistan should enhance the enabling environment for females through the provision of better job opportunities, technical skills, on-the-job training and social security benefits during all phases of economic development.

The conventional approach of testing U-shape is insufficient. To the best of the authors’ knowledge, therefore, this study incorporated a wider data set in a time series that is less evident, an advanced methodology SLM U test (2010), to validate the feminization U-shape hypothesis in Pakistan for the first time.

The purpose of this qualitative study is to investigate/review the skills required for library and information science (LIS) professionals in the 21st century and to propose an alternative approach as the suggested key skills.

Twenty-two LIS professionals from Pakistan were interviewed, and 10 LIS professionals were from abroad, including two from the USA; six respondents were from Saudi Arabia; one from Canada; and one from Malaysia. In-depth interviews with faculty members were conducted to ascertain their perceptions of the knowledge and skills necessary to be competent in delivering quality education to the future information breed.

The findings emphasise the importance of a variety of competencies for librarians and information educators, including subject knowledge and skills; information technology knowledge and skills; instructional skills; research skills; and managerial, leadership and social skills. Additionally, it was noted that LIS professionals require a diverse set of skills that should be fostered by educators and employers. By promoting these in the broader community, the author can encourage the next generation of LIS professionals to consider LIS as a viable career option.

The findings presented in this paper provide a unique window into the country’s workforce needs. Though the study was conducted from a Pakistani perspective, the findings may have implications for other countries with comparable circumstances, including social impact. It also provides a new analysis of the selected generic and LIS skills that can be communicated in an innovative manner to prospective LIS employees, employers and educators.

The purpose of this paper is to examine the effect of unemployment during the COVID-19 pandemic on mental health, quality of life and the labour market outcome across North and Southern Nigeria.

Data was obtained from staff laid off in selected tertiary institutions in North East and South West Nigeria using a self-administered questionnaire with a total sample size of 185. Findings are shown using the heteroscedastic linear regression and descriptive statistics.

The results showed a significant negative effect of unemployment during the pandemic on mental health and quality of life. Less than half of those laid off are reabsorbed into the labour market with the majority in the South than the Northern region and most are in self-employment.

The coronavirus pandemic negatively affected the human race, with a huge socio-economic impact linked to health and well-being. This reality calls for attention to the role it played on mental health and the quality of life as well as how it has influenced the labour market. Labour empowerment during a pandemic is key to cushion the effect of pandemics on health and the labour market. This can be in the form of skill empowerment and increased access to funds for business start-ups to enable self-employment that typifies the labour market after a pandemic. This in turn will reduce mental health challenges and low quality of life associated with pandemics.

To the best of the authors’ knowledge, this research is the first in the literature that provides empirical evidence of the effect of unemployment during the pandemic on well-being captured using mental health and the quality of life in Nigeria. Findings on labour market outcomes due to the pandemic and across regions in Nigeria are also scarce in the literature.