Search results

The purpose of this study was to determine whether there are differences in skin temperature under graphene-infused fleece and traditional polyester fleece materials in the interior of a wetsuit.

A total of 48 participants surfed for a minimum of 40 min in a custom wetsuit with a torso lined with graphene-infused fleece on one half and traditional polyester fleece on the other. Eight iButton thermistors were used to record skin temperatures bilaterally at the upper back, chest, abdomen and lower back every minute for the entire surf session. After surfing, participants responded to questions associated with their perception of warmth and comfort and their knowledge of fleece materials.

Skin temperatures did not differ between the two types of fleece at the upper back, chest and abdomen locations. Skin temperatures in the lower back were significantly warmer under the traditional polyester fleece compared to graphene-infused fleece. Participant responses associated with warmth were consistent with skin temperature measurements.

The results of this study indicate that a graphene-infused nylon fleece interior does not clearly influence skin temperature in surfers when compared to a traditional polyester fleece interior. While skin temperatures were significantly lower under the graphene-infused nylon fleece at the low back, the other three anatomical locations did not exhibit significant differences.

Thermoregulation is an important consideration for the safety and performance of surfers in the ocean. Evidence suggests that the inner lining of a wetsuit may impact thermoregulation while surfing; however, no prior studies have compared interior materials.

As humans are influenced by their environment, this study explores how different construal levels of ambient scent temperature affect consumers’ food choices.

This study employed a series of experimental methods from three studies, totalling five experiments. The experiments involved both laboratory and field settings, as well as neuroscientific techniques, thus generating empirical evidence.

Three studies were conducted to investigate how construal levels of both ambient scent temperature and tasks influenced food choice. Study 1 found that the construal level of ambient scent temperature significantly affected the type of food consumed. Study 2 included the task’s construal level as another factor to examine whether it interacted with the ambient scent temperature construal level. Both factors were significant, but only when perceived by the participants simultaneously. If the task’s construal level was manipulated before exposure to the ambient scent temperature, the latter did not have a significant effect. Study 3 employed a neuroscientific method to explore the mechanism behind the match between ambient scent temperature and food choices based on construal levels. The congruence of ambient scent temperature and food choice based on construal level enhanced positive emotions.

The sample size, although in line with other neuroscientific studies, was not sufficiently large for robust generalizability. This limitation can encourage future research to increase the number of participants and thus enhance the accountability of the findings. Another limitation is the participants’ cultural background.

This study’s practical implications are twofold. First, odour intensity was perceived to be the strongest in hot samples (Kähkönen et al., 1995), and we confirmed how ambient scent temperature can influence one’s food choice. Thus, food business operators can use warm ambient scent temperatures to promote hedonic food or snacks. Second, participants’ positive emotions were enhanced by the congruence of ambient scent temperature and food choice.

The association between ambient scent temperature and food choice has been extensively researched. However, this study provides an empirical explanation for the application of CLT. Accordingly, we performed a series of laboratory and field experiments using behavioural and neuroscientific approaches. The results confirmed that the construal level of ambient scent temperature significantly affected food choice. Moreover, the FAA revealed that one’s positive emotions would be prompted if there was congruence in the construal levels of ambient scent temperature and food choice.

This study has theoretical and managerial value because people’s poor understanding of food selection is affected by ambient scent temperature. Moreover, its novelty lies in the application of a neuroscientific approach to one experiment.

In the process of making agricultural production decisions in rural households, severe weather conditions, either extreme cold or heat, may squeeze the labor input in the agricultural sector, leading to a reallocation of labor between the agricultural and non-agricultural sectors. By applying a dataset with a wide latitude range, this study empirically confirms the influence of extreme temperatures on the agricultural labor reallocation, reveal the mechanism of farmers’ adaptive behavioral decision and therefore enriches the research on the impact of climate change on rural labor markets and livelihood strategies.

This study utilizes data from Chinese meteorological stations and two waves of China Household Income Project to examine the impact and behavioral mechanism of extreme temperatures on rural labor reallocation.

(1) Extremely high and low temperatures had led to a reallocation of labor force from agricultural activities to non-farm employment, with a more pronounced effect from extreme high temperature events. (2) Extreme temperatures influence famers’ decision in abandoning farmland and reducing investment in agricultural machinery, thus creating an interconnected impact on labor mobility. (3) The reallocation effect of rural labor induced by extreme temperatures is particularly evident for males, persons that perceives economic hardship or labor in economically active areas.

By applying a dataset with a wide latitude range, this study empirically confirms the influence of extreme temperatures on the agricultural labor reallocation, and reveals the mechanism of farmers’ adaptive behavioral decision and therefore enriches the research on the impact of climate change on rural labor markets and livelihood strategies.

This paper aims to systematically study the effects of reflow temperature and SAC0307 (SAC) content on the micromorphology and mechanical properties of Sn58Bi-xSAC0307 composite solder joints to meet the requirements of high integration and low-temperature packaging of devices and provide references for the application of composite solder joints.

Sn58Bi and SAC0307 solder paste was mechanically mixed in different proportions to prepare Sn58Bi-xSAC0307/ENIG solder joints. The thermal properties, microstructure and mechanical properties of the composite solder joints were studied.

As SAC content in the solder increases, the balling temperature of SnBi-SAC solder gradually increases. The addition of SAC alloy reduces the grain size of large Bi-rich phase, and there are small-sized dispersed Bi and Ag3Sn particles in the bulk solder. The intermetallic compounds composition of the SnBi-xSAC/ENIG solder joint changes from Ni3Sn4 to (Ni, Cu)3Sn4 and (Cu, Ni)6Sn5 with SAC increasing. As the soldering temperature increases, the strength of all solder joints shows a rising trend. Among them, the shear strength of SnBi-20SAC solder joints at a reflow temperature of 150°C is approximately 37 MPa. As the reflow temperature increases to 250°C, the shear strength of solder joints increases to approximately 67 MPa.

This study provides a reference for the optimization of low-temperature solder composition and soldering process under different package designs.

The purpose of this paper through the redundant monitoring unit reflecting the real-time temperature change of the array, an adaptive refresh circuit based on temperature is designed.

This paper proposed a circuit design for temperature-adaptive refresh with a fixed refresh frequency of traditional memory, high refresh power consumption at low temperature and low refresh frequency at high temperature.

Adding a metal oxide semiconductor (MOS) redundancy monitoring unit consistent with the storage unit to the storage bank can monitor the temperature change of the storage bank in real time, so that temperature-based memory adaptive refresh can be implemented.

According to the characteristics that the data holding time of dynamic random access memory storage unit decreases with the increase of temperature, a MOS redundant monitoring unit which is consistent with the storage unit is added to the storage array with the 2T storage unit as the core.

This paper aims to present a numerical investigation into heat transfer and entropy generation resulting from magnetohydrodynamic laminar flow through a microchannel under asymmetric boundary conditions. Furthermore, the authors consider the effects of viscous dissipation and Joule heating.

The finite difference method is used to obtain the numerical solution. Simulations are conducted across a broad range of Hartmann (Ha = 0 ∼ 40) and Brinkman (Br = 0.01 ∼ 1) numbers, along with various asymmetric isothermal boundaries characterized by a heating ratio denoted as ϕ.

The findings indicate a significant increase in the Nusselt number with increasing Hartmann number, regardless of whether Br equals zero or not. In addition, it is demonstrated that temperature differences between the microchannel walls can lead to substantial distortions in fluid temperature distribution and heat transfer. The results reveal that the maximum entropy generation occurs at the highest values of Ha and η (a dimensionless parameter emerging from the formulation) obtained for ϕ = −1. Moreover, it is observed that local entropy generation rates are highest near the channel wall at the entrance region.

The study provides valuable insights into the complex interactions between magnetic fields, viscous dissipation and Joule heating in microchannel flows, particularly under asymmetric heating conditions. This contributes to a better understanding of heat transfer and entropy generation in advanced microfluidic systems, which is essential for optimizing their design and performance.

Although ceramic additive manufacturing (AM) could be used to fabricate complex, high-resolution parts for diverse, functional applications, one ongoing challenge is optimizing the post-process, particularly sintering, conditions to consistently produce geometrically accurate and mechanically robust parts. This study aims to investigate how sintering temperature affects feature resolution and flexural properties of silica-based parts formed by vat photopolymerization (VPP) AM.

Test artifacts were designed to evaluate features of different sizes, shapes and orientations, and three-point bend specimens printed in multiple orientations were used to evaluate mechanical properties. Sintering temperatures were varied between 1000°C and 1300°C.

Deviations from designed dimensions often increased with higher sintering temperatures and/or larger features. Higher sintering temperatures yielded parts with higher strength and lower strain at break. Many features exhibited defects, often dependent on geometry and sintering temperature, highlighting the need for further analysis of debinding and sintering parameters.

To the best of the authors’ knowledge, this is the first time test artifacts have been designed for ceramic VPP. This work also offers insights into the effect of sintering temperature and print orientation on flexural properties. These results provide design guidelines for a particular material, while the methodology outlined for assessing feature resolution and flexural strength is broadly applicable to other ceramics, enabling more predictable part performance when considering the future design and manufacture of complex ceramic parts.

The incorporation of phosphide additives is regarded as a highly effective strategy for enhancing the lubricative qualities of base oils. This study aims to assess the lubrication behavior and efficacy of various phosphide additives in polyethylsiloxane (PES) through the employment of the Schwingum Reibung Verschleiss test methodology, across a temperature range from ambient to 300°C.

PES demonstrated commendable lubrication capabilities within the Si3N4/M50 system, primarily attributable to the Si-O frictional reaction film at the interface. This film undergoes disintegration as the temperature escalates, leading to heightened wear. Moreover, the phosphide additives were found to ameliorate the issues encountered by PES in the Si3N4/M50 system, characterized by numerous boundary lubrication failure instances. A chemical film comprising P-Fe-O was observed to form at the interface; however, at elevated temperatures, disintegration of some phosphide films precipitated lubrication failures, as evidenced by a precipitous rise in the coefficient of friction.

The results show that a phosphide reactive film can be formed and a reduction in wear rate is achieved, which is reduced by 64.7% from 2.98 (for pure PES at 300°C) to 1.05 × 10^–9 μm³/N m (for triphenyl phosphite at 300°C).

The data derived from this investigation offer critical insights for the selection and deployment of phosphide additives within high-temperature lubrication environments pertinent to PES.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0139/

This study aims to investigate the wetting behavior of AgCuTi and AgCu filler metals on selective laser melting (SLMed) Ti/TiB₂, and to analyze the microstructure and fracture characteristics of SLMed Ti/TiB₂/AgCuTi or AgCu alloy/SLMed Ti/TiB₂ brazed joints. The wetting behavior of AgCuTi and AgCu filler metals on the selective laser melted (SLMed) Ti/TiB₂ has been studied. The analysis of microstructures and fracture characteristics in vacuum-brazed SLMed Ti/TiB₂ substrate, using AgCuTi and AgCu filler metals, has been conducted to elucidate the influence of brazing temperature and alloy composition on the shear strength of the brazed joints.

Brazing SLMed-Ti/TiB₂ in a vacuum using AgCuTi and AgCu filler metals, this study aims to explore the optimal parameters for brazed joints at various brazing temperatures (800°C−950°C).

The findings suggest that elevated brazing temperatures lead to a more extensive diffusion region in the joint as a result of the partial melting of the filler metal. The joint composition changes from distinct Ti₂Cu layer/TiCu layer/filler metal to a-Ti (ss) + ß-Ti (ss)/TiCu. As the brazing temperature increases, the fracture mode shifts from brittle cleavage to ductile fracture, mainly attributed to a decrease in the CuTi within the brazed joint. This change in fracture behavior indicates an improvement in the ductility and toughness of the joint.

The originality of this study lies in the comprehensive analysis of the microstructure and shear strength of vacuum brazing SLMed Ti/TiB₂ using AgCuTi and AgCu filler metals.

The paper aims to reveal the relationship among energy efficiency, thermal comfort and thermal regulation of electrically heated footwear and to investigate influencing factors on the energy efficiency and thermal comfort.

A finite volume model was proposed to simulate the two-dimensional heat transfer in electrically heated footwear (EHF) under an extremely cold condition. The model domain consists of three-layer footwear materials, a heating pad, a sock material, an air gap and skin tissues. Model predictions were verified by experimental data from cold-contact exposure. Then the influencing factors on the energy efficiency and thermal comfort were investigated through parametric analysis.

The paper demonstrated that the skin temperature control (STC) mode provided superior thermal comfort compared to the heating pad temperature control (HPTC) mode. However, the energy efficiency for the HPTC mode with a heating temperature of 38 °C was 18% higher than the STC mode. The energy efficiency of EHF while reaching the state of thermal comfort was strongly determined by the arrangement and connection of heating elements, heating temperature, thickness and thermal conductivity of footwear materials.

The findings obtained in this paper can be used to engineer the EHF that provides optimal thermal comfort and energy efficiency in cold environments.