Search results

A visual sweetness scale with an arrow pointing to a specific sweetness level is now required on all labels of AOC Alsace. The sweetness scale makes it easier for consumers to understand what is in the bottle. What is less clear, however, is whether such labeling is always effective. To fill this gap, the current research paper aims to examine the positive and negative effects (double-edged effects) of a visual sweetness scale and identify the boundary condition.

Two studies were conducted using a 2 (cue type: scale vs text) by 2 (consumer type: novices vs experienced wine consumers) between-subjects, quasi-experimental design.

The double-edged effects are only significant among wine novices. Specifically, though wine novices are more likely to purchase wine with a sweetness scale (vs text) due to perceived diagnosticity (Study 1), they are unwilling to pay more due to low perceived quality (Study 2).

The study findings provide practical implications for wine producers, marketers and restaurants regarding when and how to use the sweetness scale on wine labels and wine service.

To the best of the authors’ knowledge, this research is the first to reveal the impact of visualizing wine style on wine labels. More importantly, while most previous research demonstrates the positive effects of using visual cues, this research sheds light on its drawbacks and examines the underlying mechanisms.

This study proposes a tensegrity-based traction structure with D-bar dual cable units. It is used to connect the airship and the ground to stabilize the airship.

The mathematical models and dynamic models of the D-bar dual cable (hereafter referred to as DD cable) unit of the tensegrity-based traction structure are established. Based on the minimum mass method, the mass of the DD cable unit in the critical state (cable member is yielding, or bar member is buckling or yielding) is analyzed. Then, the tensile strength of the DD cable unit and single cable unit under the same condition is compared using the control variate method. Finally, based on ANSYS dynamic simulation, the stability of the two structures under the same external force disturbance was tested.

Expressions for the minimum mass of the DD cable unit under different failure conditions are solved. Dynamic simulation results show that the capacity of resisting disturbance of the DD cable unit is much better than that of the single cable unit under the same wind speed. So, we find a structure more suitable for the fixed connection of an airship.

This study helps to provide theoretical reference and thinking for the practical application of the traction structure with a D-bar dual cable unit.

The current study uses an advanced machine learning method and aims to investigate whether auditors perceive financial statements that are principles-based as less risky. More specifically, this study aims to explore the association between principles-based accounting standards and audit pricing and between principles-based accounting standards and the likelihood of receiving a going concern opinion.

The study uses an advanced machine-learning method to understand the role of principles-based accounting standards in predicting audit fees and going concern opinion. The study also uses multiple regression models defining audit fees and the probability of receiving going concern opinion. The analyses are complemented by additional tests such as economic significance, firm fixed effects, propensity score matching, entropy balancing, change analysis, yearly regression results and controlling for managerial risk-taking incentives and governance variables.

The paper provides empirical evidence that auditors charge less audit fees to clients whose financial statements are more principles-based. The finding suggests that auditors perceive financial statements that are principles-based less risky. The study also provides evidence that the probability of receiving a going-concern opinion reduces as firms rely more on principles-based standards. The finding further suggests that auditors discount the financial numbers supplied by the managers using rules-based standards. The study also reveals that the degree of reliance by a US firm on principles-based accounting standards has a negative impact on accounting conservatism, the risk of financial statement misstatement, accruals and the difficulty in predicting future earnings. This suggests potential mechanisms through which principles-based accounting standards influence auditors’ risk assessments.

The authors recognize the limitation of this study regarding the sample period. Prior studies compare rules vs principles-based standards by focusing on the differences between US generally accepted accounting principles (GAAP) and international financial reporting standards (IFRS) or pre- and post-IFRS adoption, which raises questions about differences in cross-country settings and institutional environment and other confounding factors such as transition costs. This study addresses these issues by comparing rules vs principles-based standards within the US GAAP setting. However, this limits the sample period to the year 2006 because the measure of the relative extent to which a US firm is reliant upon principles-based standards is available until 2006.

The study has major public policy suggestions as it responds to the call by Jay Clayton and Mary Jo White, the former Chairs of the US Securities and Exchange Commission (SEC), to pursue high-quality, globally accepted accounting standards to ensure that investors continue to receive clear and reliable financial information globally. The study also recognizes the notable public policy implications, particularly in light of the current Chair of the International Accounting Standards Board (IASB) Andreas Barckow’s recent public statement, which emphasizes the importance of principles-based standards and their ability to address sustainability concerns, including emerging risks such as climate change.

The study has major public policy suggestions because it demonstrates the value of principles-based standards. The study responds to the call by Jay Clayton and Mary Jo White, the former Chairs of the US SEC, to pursue high-quality, globally accepted accounting standards to ensure that investors continue to receive clear and reliable financial information as business transactions and investor needs continue to evolve globally. The study also recognizes the notable public policy implications, particularly in light of the current Chair of the IASB Andreas Barckow’s recent public statement, which emphasizes the importance of principles-based standards and their ability to address sustainability concerns, including emerging risks like climate change. The study fills the gap in the literature that auditors perceive principles-based financial statements as less risky and further expands the literature by providing empirical evidence that the likelihood of receiving a going concern opinion is increasing in the degree of rules-based standards.

This study aims to propose a refined dynamic network slacks-based measure (DNSBM) to evaluate the efficiency of China's regional green innovation system which consists of basic research, applied research and commercialization stages and explore the influencing factors of the stage efficiency.

A two-step procedure is employed. The first step proposes an improved DNSBM model with flexible settings of stages' input or output efficiency and uses second order cone programming (SOCP) to solve the non-linear problem. In the second step, least absolute shrinkage and selection operator (LASSO) and Tobit models are used to explore the influencing factors of the stage efficiency. Global Dynamic Malmquist Productivity Index (GDMPI) and Dagum Gini coefficient decomposition method are introduced for further discussion of the productivity change and regional differences.

On average, Chinese provincial green innovation efficiency should be improved by 24.11% to become efficient. The commercialization stage outperforms the stages of basic research and applied research. Comparisons between the proposed model and input-oriented, output-oriented and non-oriented DNSBM models show that the proposed model is more advanced because it allows some stages to have output-oriented model characteristics while the other stages have input-oriented model characteristics. The examination of the influencing factors reveals that the three stages of the green innovation system have quite diverse influencing factors. Further discussion reveals that Chinese green innovation productivity has increased by 39.85%, which is driven mainly by technology progress, and the increasing tendency of regional differences between northern and southern China should be paid attention to.

This study proposes an improved dynamic three-stage slacks-based measure (SBM) model that allows calculating output efficiency in some stages and input efficiency in the other stages with the application of SOCP approach. In order to capture productivity change, this study develops a GDMPI based on the DNSBM model. In practice, the efficiency of regional green innovation in China and the factors that influence each stage are examined.

Material extrusion-based additive manufacturing is a prominent manufacturing technique to fabricate complex geometrical three-dimensional (3D) parts. Despite the indisputable advantages of material extrusion-based technique, the poor surface and subsurface integrity hinder the industrial application of this technology. The purpose of this study is introducing the hot air jet treatment (HAJ) technique for surface treatment of additive manufactured parts.

In the presented research, novel theoretical formulation and finite element models are developed to study and model the polishing mechanism of printed parts surface through the HAJ technique. The model correlates reflow material volume, layer width and layer height. The reflow material volume is a function of treatment temperature, treatment velocity and HAJ velocity. The values of reflow material volume are obtained through the finite element modeling model due to the complexity of the interactions between thermal and mechanical phenomena. The theoretical model presumptions are validated through experiments, and the results show that the treatment parameters have a significant impact on the surface characteristics, hardness and dimensional variations of the treated surface.

The results demonstrate that the average value of error between the calculated theoretical results and experimental results is 14.3%. Meanwhile, the 3D plots of Ra and Rq revealed that the maximum values of Ra and Rq reduction percentages at 255°C, 270°C, 285°C and 300°C treatment temperatures are (35.9%, 33.9%), (77.6%,76.4%), (94%, 93.8%) and (85.1%, 84%), respectively. The scanning electron microscope results illustrate three different treatment zones and the treatment-induced and manufacturing-induced entrapped air relief phenomenon. The measured results of hardness variation percentages and dimensional deviation percentages at different regimes are (8.33%, 0.19%), (10.55%, 0.31%) and (−0.27%, 0.34%), respectively.

While some studies have investigated the effect of the HAJ process on the structural integrity of manufactured items, there is a dearth of research on the underlying treatment mechanism, the integrity of the treated surface and the subsurface characteristics of the treated surface.

The purpose of this study is to examine the impact of selected corporate governance (CG) variables on the equity value multiple (EVM) of listed firms in Nigeria.

The research used data obtained from 100 firms listed on the Nigerian Stock Exchange (NSE) from 2014 to 2018. A generalized method of moment was used to estimate the relationship, whereas principal component analysis was used to generate composite values of EVMs.

Findings reveal a significant association between board size, board independence, board gender diversity, managerial shareholding, audit committee independence, disclosure of CG information and EVM at a 1% level of significance.

This study was limited to firms that disclosed information on CG and EVMs.

These empirical findings lend support to agency theory, which suggests the use of various CG variables as a way of reducing principal-agent conflicts. It also lends support to resource dependency theory from a gender diversity perspective.

The study is a pioneering effort toward unlocking the relationship between some CG variables and the EVMs, focusing on firms listed on the NSE.

The criteria importance through intercriteria correlation (CRITIC) and range of value (ROV) combined methods were used to determine a single index for all multiple responses.

This paper used cold metal transfer (CMT) and pulse metal-inert gas (MIG) welding processes to study the weld-on-bead geometry of AA2099-T86 alloy. This study used Taguchi's approach to find the optimal setting of the input welding parameters. The welding current, welding speed and contact-tip-to workpiece distance were the input welding parameters for finding the output responses, i.e. weld penetration, dilution and heat input. The L9 orthogonal array of Taguchi's approach was used to find out the optimal setting of the input parameters.

The optimal input welding parameters were determined with combined output responses. The predicted optimum welding input parameters were validated through confirmation tests. Analysis of variance showed that welding speed is the most influential factor in determining the weld bead geometry of the CMT and pulse MIG welding techniques.

The heat input and weld bead geometry are compared in both welding processes. The CMT welding samples show superior defect-free weld beads than pulse MIG welding due to lesser heat input and lesser dilution.

An abundance of techniques has been presented so forth for waste classification but, they deliver inefficient results with low accuracy. Their achievement on various repositories is different and also, there is insufficiency of high-scale databases for training. The purpose of the study is to provide high security.

In this research, optimization-assisted federated learning (FL) is introduced for thermoplastic waste segregation and classification. The deep learning (DL) network trained by Archimedes Henry gas solubility optimization (AHGSO) is used for the classification of plastic and resin types. The deep quantum neural networks (DQNN) is used for first-level classification and the deep max-out network (DMN) is employed for second-level classification. This developed AHGSO is obtained by blending the features of Archimedes optimization algorithm (AOA) and Henry gas solubility optimization (HGSO). The entities included in this approach are nodes and servers. Local training is carried out depending on local data and updations to the server are performed. Then, the model is aggregated at the server. Thereafter, each node downloads the global model and the update training is executed depending on the downloaded global and the local model till it achieves the satisfied condition. Finally, local update and aggregation at the server is altered based on the average method. The Data tag suite (DATS_2022) dataset is used for multilevel thermoplastic waste segregation and classification.

By using the DQNN in first-level classification the designed optimization-assisted FL has gained an accuracy of 0.930, mean average precision (MAP) of 0.933, false positive rate (FPR) of 0.213, loss function of 0.211, mean square error (MSE) of 0.328 and root mean square error (RMSE) of 0.572. In the second level classification, by using DMN the accuracy, MAP, FPR, loss function, MSE and RMSE are 0.932, 0.935, 0.093, 0.068, 0.303 and 0.551.

The multilevel thermoplastic waste segregation and classification using the proposed model is accurate and improves the effectiveness of the classification.

This study aims to examine the determinants of Foreign Corrupt Practices Act (FCPA) violations and consequences of FCPA enforcements.

This paper uses publicly available data from Compustat, I/B/E/S and Thomson Reuters databases, combined with Securities and Exchange Commission (SEC) and Department of Justice (DOJ) cases, to extract insights on FCPA violations and enforcements using econometric approaches.

The main determinants of FCPA violations appear to be firm size, multinational structure, country corruption and Sarbanes-Oxley Act control weaknesses. Traditional misreporting risks (F-score and M-score) do not predict FCPA violations. This study discovers significant differences between FCPA violations by motivation, as in, sale generation, rent extraction or cost evasion. Bribes motivated by sale generation or rent extraction are partially driven by the extent of the firm’s global operations, whereas bribes motivated by cost evasion relate to internal influences. This study also finds that enforcement is more salient for criminal violations (DOJ enforcement), compared to civil violations (SEC enforcement).

This research provides new insights into the determinants of FCPA violations while underscoring the need for effective measures to combat bribery and promote ethical business practices. This research contributes to the ongoing efforts to curtail bribery, offering valuable insights into the characteristics of firms more likely to engage in bribery and contexts in which these activities occur. It provides critical implications for regulatory bodies, highlighting the differential responses of firms to varying types of enforcement, namely, criminal versus civil, as the authors observe greater decreases in internal control weaknesses following DOJ enforcement compared to SEC enforcement.

For enforcement agencies, the findings underscore the importance of rigorous criminal enforcement against FCPA violations, highlighting the improved control environments prompted by DOJ actions. Managers will find this research relevant, as it demonstrates that a firm’s entry into international markets substantially elevates the risk of its representatives engaging in bribery with foreign officials. In addition, the results are of interest to regulators, revealing that the underlying motivations driving a firm’s activities can significantly alter the factors to consider that might lead to an FCPA violation.

This paper is the original work of the authors and explores the determinants and consequences of FCPA violations and enforcement actions since 2002. To the best of the authors’ knowledge, it is the first to explore bribe determinants by their motive and documents industry-wide benefits arising from criminal enforcement.

The purpose of this study is to use the corrected stress field theory to derive the shear capacity of geopolymer concrete beams (GPC) and consider the shear-span ratio as a major factor affecting the shear capacity. This research aims to provide guidance for studying the shear capacity of GPC and to observe how the failure modes of beams change with the variation of the shear-span ratio, thereby discovering underlying patterns.

Three test beams with shear span ratios of 1.5, 2.0 and 2.5 are investigated in this paper. For GPC beams with shear-span ratios of 1.5, 2.0 and 2.5, ultimate capacities are 337kN, 235kN and 195kN, respectively. Transitioning from 1.5 to 2.0 results in a 30% decrease in capacity, a reduction of 102kN. Moving from 2.0 to 2.5 sees a 17% decrease, with a loss of 40KN in capacity. A shear capacity formula, derived from modified compression field theory and considering concrete shear strength, stirrups and aggregate interlocking force, was validated through finite element modeling. Additionally, models with shear ratios of 1 and 3 were created to observe crack propagation patterns.

For GPC beams with shear-span ratios of 1.5, 2.0 and 2.5, ultimate capacities of 337KN, 235KN and 195KN are achieved, respectively. A reduction in capacity of 102KN occurs when transitioning from 1.5 to 2.0 and a decrease of 40KN is observed when moving from 2.0 to 2.5. The average test-to-theory ratio, at 1.015 with a variance of 0.001, demonstrates strong agreement. ABAQUS models beams with ratios ranging from 1.0 to 3.0, revealing crack trends indicative of reduced crack angles with higher ratios. The failure mode observed in the models aligns with experimental results.

This article provides a reference for the shear bearing capacity formula of geopolymer reinforced concrete (GRC) beams, addressing the limited research in this area. Additionally, an exponential model incorporating the shear-span ratio as a variable was employed to calculate the shear capacity, based on previous studies. Moreover, the analysis of shear capacity results integrated literature from prior research. By fitting previous experimental data to the proposed formula, the accuracy of this study's derived formula was further validated, with theoretical values aligning well with experimental results. Additionally, guidance is offered for utilizing ABAQUS in simulating the failure process of GRC beams.