Search results

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

This paper aims to design an active shock absorber scheme for use in conjunction with a passive shock absorber to suppress the horizontal vibration of elevator cars in a smaller range and shorter time. The developed active shock absorber will also improve the safety and comfort of passengers driving in ultra-high-speed elevators.

A six-degree of freedom dynamic model is established according to the position and condition of the car. Then the active shock absorber and disturbance compensation-based adaptive control scheme are designed and simulated in MATLAB/Simulink. The results are analysed and compared with the traditional shock absorber.

The results show that, compared with traditional spring-based passive damping systems, the designed active shock absorber can reduce vibration displacement by 60%, peak acceleration by 50% and oscillation time by 2/3 and is more robust to different spring stiffness, damping coefficient and load.

The developed active shock absorber and its control algorithm can significantly reduce vibration amplitude and converged time. It can also adjust the damping strength according to the actual load of the elevator car, which is more suitable for high-speed elevators.

The article aims to investigate how washing practices focused on appeasing sceptics of diversity work in for-profit organizations play out in corporate online communication of diversity and inclusion efforts, and how these enable communication to a wide audience that includes social equity advocates.

Online corporate communication data of diversity and inclusion themes were compiled from the websites of eight Swedish-based multinational corporations. The data included content from the companies’ official websites and annual reports and sustainability reports as well as diversity and inclusion-themed blog posts. A thematic analysis was conducted on the website content.

The study showcases how tensions between conflicting external demands are navigated by keeping the communication open to several interpretations and thereby achieving multivocality. In the studied corporate texts on diversity and inclusion, this is achieved by alternating between elements catering to a business case audience and those that appeal to a social justice audience, with some procedures managing to appease both audiences at the same time.

The article complements previously described forms of washing by introducing an additional type of washing – business case washing – an articulation of the business case rhetoric that characterizes the diversity management discourse. While much has been written about washing to satisfy advocates of social change and equity, washing to appease shareholders and boardroom members, who are focused on profit and economic growth, has received less attention. The article suggests that online corporate communication on diversity and inclusion, by appeasing diverse audiences, can be seen as aspirational talk.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

In fire resistance tests (FRTs) of building materials, a crucial criterion to pass the test procedure is to avoid the leakage of the hot flue gases caused by gaps and cracks occurring due to the thermal exposure. The present study's aim is to calculate the deformation of a steel door, which is embedded within a wall made of bricks, and qualitatively determine the flue gas leakage.

A computational fluid dynamics/finite element method (CFD/FEM) coupling was introduced representing an intermediate approach between a one-way and a full two-way coupling methodology, leading to a simplified two-way coupling (STWC). In contrast to a full two way-coupling, the heat transfer through the steel door was simulated based on a one-way approach. Subsequently, the predicted temperatures at the door from the one-way simulation were used in the following CFD/FEM simulation, where the fluid flow inside and outside the furnace as well as the deformation of the door were calculated simultaneously.

The simulation showed large gaps and flue gas leakage above the door lock and at the upper edge of the door, which was in close accordance to the experiment. Furthermore, it was found that STWC predicted similar deformations compared to the one-way coupling.

Since two-way coupling approaches for fluid/structure interaction in fire research are computationally demanding, the number of studies is low. Only a few are dealing with the flue gas exit from rooms due to destruction of solid components. Thus, the present study is the first two-way approach dealing with flue gas leakage due to gap formation.

The aim of this study is to empirically explore and analyze the concrete tasks of output measurement and the inherent challenges related to these tasks in a traditional and autonomous professional public work setting – the judicial system.

The analysis of the tasks is based on a categorization of general performance measurement motives (control-motivate-learn) and main stakeholder levels (society-organization-professionals). The analysis is exploratory and conducted as an empirical content analysis on materials and reports produced in two performance improvement projects conducted in European justice organizations.

The identified main tasks in the different categories are related to managing resources, controlling performance deviations, and encouraging improvement and development of performance. Based on the results, key improvement areas connected to output measurement in professional public organizations are connected to the improvement of objectivity and fairness in budgeting and work allocation practices, improvement of output measures' versatility and informativeness to highlight motivational and learning purposes, improvement of professional self-management in setting output targets and producing outputs, as well as improvement of organizational learning from the output measurement.

The paper presents empirically founded practical examples of challenges and improvement opportunities related to the tasks of output measurement in professional public organization.

This paper fulfils an identified need to study how general performance management motives realize as concrete tasks of output measurement in justice organizations.