Search results

Some studies have been reported in the past on diaphragmatic hernia (DH) surgery techniques using additive manufacturing (AM) technologies, symptoms of a hernia and post-surgery complications. But hitherto little has been reported on bibliographic analysis (BA) for health monitoring of bovine post-DH surgery for long-term management. Based on BA, this study aims to explore the sensor fabrication integrated with innovative AM technologies for health monitoring assistance of bovines post-DH surgery.

A BA based on the data extracted through the Web of Science database was performed using bibliometric tools (R-Studio and Biblioshiny).

After going through the BA and a case study, this review provides information on various 3D-printed meshes used over the sutured site and available Internet of Things-based solutions to prevent the recurrence of DH.

Research gaps exist for 3D-printed conformal sensors for health monitoring of bovine post-DH surgery.

Microribbon with meander type based on giant magnetoimpedance (GMI) effect has become a research hot spot due to their higher sensitivity and spatial resolution. The purpose of this paper is to further optimize the line spacing to improve the performance of meanders for sensor application.

The model of GMI effect of microribbon with meander type is established. The effect of line spacing (Ls) on GMI behavior in meanders is analyzed systematically.

Comparison of theory and experiment indicates that decreasing the line spacing increases the negative mutual inductance and a consequent increase in the GMI effect. The maximum value of the GMI ratio increases from 69% to 91.8% (simulation results) and 16.9% to 51.4% (experimental results) when the line spacing is reduced from 400 to 50 µm. The contribution of line spacing versus line width to the GMI ratio of microribbon with meander type was contrasted. This behavior of the GMI ratio is dominated by the overall negative contribution of the mutual inductance.

This paper explores the effect of line spacing on the GMI ratio of meander type by comparing the simulation results with the experimental results. The superior line spacing is found in the identical sensing area. The findings will contribute to the design of high-performance micropatterned ribbon with meander-type GMI sensors and the establishment of a ribbon-based magnetic-sensitive biosensing system.

The pressing issues of climate change and environmental degradation call for a reevaluation of how we approach economic activities. Both leaders and corporations are now shifting their focus, toward adopting practices and embracing the concept of circular economy (CE). Within this context, the Food and Beverage (F&B) sector, which significantly contributes to greenhouse gas (GHG) emissions, holds the potential for undergoing transformations. This study aims to explore the role that Artificial Intelligence (AI) can play in facilitating the adoption of CE principles, within the F&B sector.

This research employs the Best Worst Method, a technique in multi-criteria decision-making. It focuses on identifying and ranking the challenges in implementing AI-driven CE in the F&B sector, with expert insights enhancing the ranking’s credibility and precision.

The study reveals and prioritizes barriers to AI-supported CE in the F&B sector and offers actionable insights. It also outlines strategies to overcome these barriers, providing a targeted roadmap for businesses seeking sustainable practices.

This research is socially significant as it supports the F&B industry’s shift to sustainable practices. It identifies key barriers and solutions, contributing to global climate change mitigation and sustainable development.

The research addresses a gap in literature at the intersection of AI and CE in the F&B sector. It introduces a system to rank challenges and strategies, offering distinct insights for academia and industry stakeholders.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.

Radical changes in consumer habits induced by the coronavirus disease (COVID-19) pandemic suggest that the usual demand forecasting techniques based on historical series are questionable. This is particularly true for hospitality demand, which has been dramatically affected by the pandemic. Accordingly, we investigate the suitability of tourists’ activity on Twitter as a predictor of hospitality demand in the Way of Saint James – an important pilgrimage tourism destination.

This study compares the predictive performance of the seasonal autoregressive integrated moving average (SARIMA) time-series model with that of the SARIMA with an exogenous variables (SARIMAX) model to forecast hotel tourism demand. For this, 110,456 tweets posted on Twitter between January 2018 and September 2022 are used as exogenous variables.

The results confirm that the predictions of traditional time-series models for tourist demand can be significantly improved by including tourist activity on Twitter. Twitter data could be an effective tool for improving the forecasting accuracy of tourism demand in real-time, which has relevant implications for tourism management. This study also provides a better understanding of tourists’ digital footprints in pilgrimage tourism.

This study contributes to the scarce literature on the digitalisation of pilgrimage tourism and forecasting hotel demand using a new methodological framework based on Twitter user-generated content. This can enable hospitality industry practitioners to convert social media data into relevant information for hospitality management.

2019冠狀病毒病引致消費者習慣有根本的改變; 這些改變顯示，根據歷史序列而運作的慣常需求預測技巧未必是正確的。這不確性尤以受到大流行極大影響的酒店服務需求為甚。因此，我們擬探討、若把在推特網站上的旅遊活動視為聖雅各之路 (一個重要的朝聖旅遊聖地) 酒店服務需求的預測器，這會否是合適的呢?

本研究比較 SARIMA 時間序列模型與附有外生變數 (SARIMAX)模型兩者在預測旅遊及酒店服務需求方面的表現。為此，研究人員收集在推特網站上發佈的資訊，作為外生變數進行研究。這個樣本涵蓋於2018年1月至2022年9月期間110,456個發佈資訊。

研究結果確認了傳統的時間序列模型，若涵蓋推特網站上的旅遊活動，則其對旅遊需求方面的預測會得到顯著的改善。推特網站的數據，就改善預測實時旅遊需求的準確度，或許可成為有效的工具; 而這發現對旅遊管理會有一定的意義。本研究亦讓我們進一步瞭解朝聖旅遊方面旅客的數碼足跡。

現存文獻甚少探討朝聖旅遊的數字化，而本研究不但在這方面充實了有關的文獻，還使用了一個根據推特網站上使用者原創內容嶄新的方法框架，進行分析和探討。這會幫助酒店從業人員把社交媒體數據轉變為可供酒店管理之用的合宜資訊。

This study aims to assess the impact of determinants on the effectiveness of internal audit (IA) within the banking industry of Bangladesh.

The data was obtained through 152 survey questionnaires from a total of 43 privately owned and six state-owned commercial banks in Bangladesh. The analysis was conducted using structural equation modeling.

The findings demonstrate that the independence of internal auditors and the quality of IA substantially impact enhancing the efficiency of IA. On the other hand, the competence of internal auditors and management support in IA functions do not significantly impact the effectiveness of IA.

The study’s findings may have significant policy implications for the government, regulators, internal auditors, management committees and other stakeholders in establishing programmes to enhance the efficacy of IA as a component of banking audit management reforms.

This study makes three distinct contributions to the existing literature. Firstly, previous literature focused on the determinants affecting the external audit efficiency of the public companies and banking sectors in Bangladesh (Hasan, 2018; M. M. U. Reza, 2021). In this study, the author enhances the research by presenting empirical findings on the IA effectiveness of banks. Secondly, the author expands the research by incorporating both private and state-owned commercial banks as samples. Thirdly, the study is unique given that it investigates the effectiveness of IA in response to the recent financial scandals in the banking industry of Bangladesh (The Daily Star, 2023).