Search results

Engineering composite laminates/structures are usually subjected to complex and variable loads, which result in interlayer delamination damage. However, damaged laminate may cause the whole structure to fail before reaching the design level. Therefore, the purpose of this paper is to develop an equivalent model to effectively evaluate compressive residual strength.

In this paper, taking carbon fiber reinforced composite T300/69 specimens as the study object, first, the compressive residual strength under different impact energy is obtained. Then, zero-thickness cohesive elements, Hashin failure criteria and Camanho nonlinear degradation scheme are used to simulate the full-process simulation for compression after edge impact (CAEI). Lastly, based on an improved Whitney–Nuismer criterion, the equation of edge hole stress distribution, characteristic length and compressive residual strength is used to verify the correctness of the equivalent model.

An equivalent relationship between the compressive residual strength of damaged laminates and laminates with edge hole is established. For T300/69 laminates with a thickness of 2.4 mm, the compressive residual strength after damage under an impact energy of 3 J is equivalent to that when the hole aperture R = 2.25 mm and the hole aperture R = 9.18 mm when impact energy is 6 J. Besides, the relationship under the same size and different thickness is obtained.

The value of this study is to provide a reference for the equivalent behavior of damaged laminates. An equivalent model proposed in this paper will contribute to the research of compressive residual strength and provide a theoretical basis for practical engineering application.

The stress state near the notch affects fatigue damage directly, but quantifying the stress field is difficult. The purpose of this study is to provide a mathematical description method of the stress field near the notch to achieve a reliable assessment of the fatigue life of notched specimens.

Firstly, the stress distribution of notched specimens of different materials and shapes under different stress levels is investigated, and a method for calculating the stress gradient impact factor is presented. Then, the newly defined stress gradient impact factor is used to describe the stress field near the notch, and an expression for the stress at any point along a specified path is developed. Furthermore, by combining the mathematical expressions for the stress field near the notch, a multiaxial fatigue life prediction model for notched shaft specimens is established based on the damage mechanics theory and closed solution method.

The stress gradient factor for notched specimens with higher stress concentration factors (V60-notch, V90-notch) varies to a certain extent when the external load and material change, but for notched specimens with relatively lower stress concentration factors (C-notch, U-notch, stepped shaft), the stress gradient factor hardly varies with the change in load and material, indicating that the shape of the notch has a greater influence on the stress gradient. It is also found that the effect of size on the stress gradient factor is not obvious for notched specimens with different shapes, there is an obvious positive correlation between the normal stress gradient factor and the normal stress concentration factor compared with the relationship between the shear stress gradient factor and the stress concentration factor. Moreover, the predicted results of the proposed model are in better agreement with the experimental results of five kinds of materials compared with the FS model, the SWT model, and the Manson–Coffin equation.

In this paper, a new stress gradient factor is defined based on the stress distribution of a smooth specimen. Then, a mathematical description of the stress field near the notch is provided, which contains the nominal stress, notch size, and stress concentration factor which is calculated by the finite element method (FEM). In addition, a multiaxial fatigue life prediction model for shaft specimens with different notch shapes is established with the newly established expressions based on the theory of damage mechanics and the closed solution method.

In practical engineering, oil filters often work under asymmetric cyclic loading. In order to improve the prediction accuracy of fatigue life of the oil filters under asymmetric cyclic loading, the effect of strain ratio and low cycle fatigue plastic deformation on fatigue life need to be considered. This paper aims to discuss the aforementioned objective.

First, strain-controlled fatigue tests with strain ratios of 0, 0.5 and −1 were carried out on the oil filter material 2A70-T6 aluminum alloy, and the test data were used to obtain strain fatigue life curves at three strain ratios. Then, based on the idea of the constant life curve method, the average value of the ratio of the strain amplitude corresponding to different strain ratios under the same partial life was defined as the strain ratio factor. Finally, the elastic-plastic factor was modified by the strain ratio factor, and a new fatigue life prediction model considering the effect of strain ratio was proposed.

The proposed model was validated, respectively, by fatigue test data of 2A70-T6 aluminum alloy, 2124-T851 aluminum alloy and oil filter and the results of the proposed model were compared with the Coffin–Manson equation, Morrow model and Smith–Watson–Topper (SWT) model, showing that the proposed model had higher applicability and accuracy.

In this work, a strain ratio factor is established based on the idea of the constant life curve method, and the strain ratio factor is used to modify the introduced elastic-plastic factor, and then a new fatigue life prediction model considering the influence of strain ratio and low cycle fatigue plastic deformation on material fatigue damage accumulation is proposed. The results show that the prediction results of the proposed model are in good agreement with the experimental data, and the proposed model has good fatigue life prediction ability considering the influence of strain ratio and lays a foundation for the fatigue life prediction of the oil filter.

With the growing concern of various sectors of society regarding environmental issues and the promotion of sustainable development, green technology innovation is generally considered to be conducive to the long-term development of enterprises. However, because of the existence of agency problems, managers may have shortsighted behaviors. Then how will managers' shortsighted behaviors affect enterprises' green technology innovation?

This paper uses machine learning-based text analysis methods to construct a manager myopia index based on the data from A-share listed companies on the Shanghai and Shenzhen Stock Exchanges from 2015 to 2020. We examine the impact of manager myopia on green technology innovation in companies.

Our study finds that manager myopia significantly inhibits green technology innovation in companies. However, when multiple large shareholders coexist and the proportion of institutional investors' holdings is high, it can alleviate the inhibitory effect of manager myopia on green innovation. Heterogeneity tests show that the impact of manager myopia on green technology innovation is relatively significant in non-state-owned and manufacturing companies, as well as in the electricity industry. Robustness tests demonstrate that our conclusions remain valid after using propensity score matching to eliminate endogeneity problems.

From the perspective of corporate governance, this paper incorporates managers' shortsightedness, multiple large shareholders and institutional investors' shareholding ratios into the same logical framework, analyzes their internal mechanisms, helps improve corporate governance, enhances green innovation capabilities and has strong implications for the implementation of national innovation-driven development strategies and the achievement of “carbon peak” and “carbon neutrality” targets.

Due to the limitation of experimental conditions and budget, fatigue data of mechanical components are often scarce in practical engineering, which leads to low reliability of fatigue data and reduces the accuracy of fatigue life prediction. Therefore, this study aims to expand the available fatigue data and verify its reliability, enabling the achievement of life prediction analysis at different stress levels.

First, the principle of fatigue life probability percentiles consistency and the perturbation optimization technique is used to realize the equivalent conversion of small samples fatigue life test data at different stress levels. Meanwhile, checking failure model by fitting the goodness of fit test and proposing a Monte Carlo method based on the data distribution characteristics and a numerical simulation strategy of directional sampling is used to extend equivalent data. Furthermore, the relationship between effective stress and characteristic life is analyzed using a combination of the Weibull distribution and the Stromeyer equation. An iterative sequence is established to obtain predicted life.

The TC4–DT titanium alloy is selected to assess the accuracy and reliability of the proposed method and the results show that predicted life obtained with the proposed method is within the double dispersion band, indicating high accuracy.

The purpose of this study is to provide a reference for the expansion of small sample fatigue test data, verification of data reliability and prediction of fatigue life data. In addition, the proposed method provides a theoretical basis for engineering applications.

Sufficient sample data are the necessary condition to ensure high reliability; however, there are relatively poor fatigue test data in the engineering, which affects fatigue life's prediction accuracy. Based on this, this research intends to analyze the fatigue data with small sample characteristics, and then realize the life assessment under different stress levels.

Firstly, the Bootstrap method and the principle of fatigue life percentile consistency are used to realize sample aggregation and information fusion. Secondly, the classical outlier detection algorithm (DBSCAN) is used to check the sample data. Then, based on the stress field intensity method, the influence of the non-uniform stress field near the notch root on the fatigue life is analyzed, and the calculation methods of the fatigue damage zone radius and the weighting function are revised. Finally, combined with Weibull distribution, a framework for assessing multiaxial low-cycle fatigue life has been developed.

The experimental data of Q355(D) material verified the model and compared it with the Yao’s stress field intensity method. The results show that the predictions of the model put forward in this research are all located within the double dispersion zone, with better prediction accuracies than the Yao’s stress field intensity method.

Aiming at the fatigue test data with small sample characteristics, this research has presented a new method of notch fatigue analysis based on the stress field intensity method, which is combined with the Weibull distribution to construct a low-cycle fatigue life analysis framework, to promote the development of multiaxial fatigue from experimental studies to practical engineering applications.

This paper aims to propose a lightweight, high-accuracy object detection model designed to enhance seam tracking quality under strong arcs and splashes condition. Simultaneously, the model aims to reduce computational costs.

The lightweight model is constructed based on Single Shot Multibox Detector (SSD). First, a neural architecture search method based on meta-learning and genetic algorithm is introduced to optimize pruning strategy, reducing human intervention and improving efficiency. Additionally, the Alternating Direction Method of Multipliers (ADMM) is used to perform structural pruning on SSD, effectively compressing the model with minimal loss of accuracy.

Compared to state-of-the-art models, this method better balances feature extraction accuracy and inference speed. Furthermore, seam tracking experiments on this welding robot experimental platform demonstrate that the proposed method exhibits excellent accuracy and robustness in practical applications.

This paper presents an innovative approach that combines ADMM structural pruning and meta-learning-based neural architecture search to significantly enhance the efficiency and performance of the SSD network. This method reduces computational cost while ensuring high detection accuracy, providing a reliable solution for welding robot laser vision systems in practical applications.

Today’s world is struggling with the hardship of climate change that has drastically disturbed human life, wildlife and the earth’s biological system. This study aims to show how implementing climate change mitigation strategies and environmental protection measures can ensure sustainable development through collaborative efforts between governmental authorities and the nation’s populace.

An extensive literature review of studies is conducted from across the world concentrating on holistic, sustainable development, enabling a showcase of various conferences, action plans initiated and resolutions passed. VOSviewer software is used to quantify the results of bibliometric analysis and cluster analysis. A total of 260 research studies released between 1993 and 2022 on the Scopus platform are quantified in terms of topmost publications, collaborations among authors, citations index and year-wise publication. The search string has keywords including “climate change,” “sustainable development” and “environment protection.”

The study results revealed a steep increase in research publications in the last three years, from 2017 to 2021, which serves as the basis of the emergence of high-impact articles. The most cited document in this context throws light on assessing vulnerability to climatic risk and building adaptive capacity. It also draws attention to voluntary carbon markets’ rationale while condemning emission trading systems for climate change due to structural flaws, negative consequences and questionable emission-cutting effectiveness. Low energy demand, zero energy buildings and shared socioeconomic pathways should be implemented as strategies for sustainable development.

This study provides a significant opportunity to construct a valuable addition to mitigate climate change. Also, it shows a positive and significant correlation between mitigation and adaptation policies by analyzing publication efforts worldwide considering local climate risks and national adaptation mandates.

The originality of this study lies in its comprehensive approach, combining literature review, bibliometric analysis and cluster analysis to provide insights into current research trends, challenges and potential strategies for addressing climate change and promoting sustainable development. The study’s emphasis on the correlation between mitigation and adaptation policies adds practical significance to its findings.

The purpose of this paper is to predict a suitable paper substrate which has high capillary pressure with the tendency of subsequent fluid wrenching in onward direction for the fabrication of microfluidics device application.

The experiment has been done on the Whatman^TM grade 1, Whatman^TM chromatography and nitrocellulose paper samples which are made by GE Healthcare Life Sciences. The structural characterization of paper samples for surface properties has been done by scanning electron microscope and ImageJ software. Identification of functional groups on the surface of samples has been done by Fourier transform infrared analysis. A finite elemental analysis has also been performed by using the “Multiphase Flow in Porous Media” module of the COMSOL Multiphysics tool which combines Darcy’s law and Phase Transport in Porous Media interface.

Experimentally, it has been concluded that the paper substrate for flexible microfluidic device application must have large number of internal (intra- and interfiber) pores with fewer void spaces (external pores) that have high capillary pressure to propel the fluid in onward direction with narrow paper fiber channel.

Surface structure has a dynamic impact in paper substrate utilization in multiple applications such as paper manufacturing, printing process and microfluidics applications.

Ferrofluid seals are known for their low friction torque and high tightness. However, they have some limitation due to the allowable rotational speed. The work presented here analyzes the performance of newly designed seals which are a combination of a ferrofluid and a centrifugal seal. The new seals can operate at high speeds. The purpose of this study is to theoretically predict the performance of combined seals.

Three seals were designed and selected for analysis. A version of the seals with a nonmagnetic insert is also considered, the purpose of which is to facilitate the installation and return of ferrofluid during low rotational speeds. The analyses were based on combining the results of numerical simulation of magnetic field distribution with mathematical models.

A combination of ferrofluid sealing and centrifugal sealing is possible. Analyses showed that the combined seal could hold a minimum pressure of 190 kPa in the velocity range of 0–100 m/s. The problem with this type of seal is the temperature.

New seal designs are presented. Key parameters that affect the seal operation are discussed. A methodology that can be used in the design of such seals is presented.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0221/.