Search results

The purpose of this paper is to understand if and how industrialized house building (IHB) could support productivity developments for housebuilding on project and industry levels. The take is that fragmentation of construction is one explanation for the lack of productivity growth, and that IHB could be an integrating method of overcoming horizontal and vertical fragmentation.

Singe-factor productivity measures are calculated based on data reported by IHB companies and compared to official produced and published research data. The survey covers the years 2013–2020 for IHB companies building multi-storey houses in timber. Generalization is sought through descriptive statistics by contrasting the data samples to the used means to control vertical and horizontal fragmentation formulated as three theoretical propositions.

According to the results, IHB in timber is on average more productive than conventional housebuilding at the company level, project level, in absolute and in growth terms over the eight-year period. On the company level, the labour productivity was on average 10% higher for IHB compared to general construction and positioned between general construction and general manufacturing. On the project level, IHB displayed an average cost productivity growth of 19% for an employed prefabrication degree of about 45%.

Empirical evidence is presented quantifying so far perceived advantages of IHB. By providing analysis of actual cost and project data derived from IHB companies, the article quantifies previous research that IHB is not only about prefabrication. The observed positive productivity growth in relation to the employed prefabrication degree indicates that off-site production is not a sufficient mean for reaching high productivity and productivity growth. Instead, the capabilities to integrate the operative logic of conventional housebuilding together with logic of IHB platform development and use is a probable explanation of the observed positive productivity growth.

Competency frameworks can support public procurement capacity development and performance. However, literature on connecting professionalisation with national procurement contexts is limited. This paper aims to explain and conceptualise recent Romanian experience with developing bespoke competency frameworks at national level for public procurement that reflect the features of the Romanian public procurement system. The approach used could guide in broad-brush, mutatis mutandis, other (national) public procurement systems with comparable features, mainly those seeking a shift from a rather administrative function of public procurement towards a strategic function.

This case study reflects on the methodology used for analysing the Romanian public procurement environment in EU context to develop bespoke professionalisation instruments, and on ways to integrate competency management approaches in Romanian public procurement culture. That methodological mix has been mainly qualitative and constructionist, within an applied research approach. It combined desk research with empirical research and included legal research in this context.

A principled, methodological and pragmatic approach tailored to the procurement environment in question is essential for developing competency frameworks capable to resonate to and address the specific practical needs of that procurement system.

Competency frameworks can uphold societal objectives through public procurement.

Using valuable insights into the development of the Romanian public procurement competency frameworks, the paper provides a conceptual framework for instilling competency management approaches to public procurement professional development where the latter is governed by a rather distinct, public administration, paradigm. This conceptual framework can guide other public procurement systems and stimulate further research.

The construction industry shows an increased interest in how to manage logistics within construction projects. Often construction logistics is outsourced to a logistics service provider (LSP). However, construction logistics is normally approached either as a strategic decision or as an operational issue and rarely as a tactical concern. The purpose of this study is to explore how to organize the logistics outsourcing decision at strategic, tactical and operational levels.

This study is performed as a single-case study within a construction corporation, containing (amongst others) a building contractor (BC) and a construction equipment rental company (CERC) offering logistics services.

The study shows that to procure construction logistics service successfully, BCs need logistics capabilities at strategic and tactical levels to maintain an alignment between the use of logistics services and operational characteristics. Simultaneously, CERC’s need to design their service offerings to correspond to the needs of the BC.

This study builds on a single-case study of a Swedish construction corporation. Further research is needed to better understand current logistics outsourcing and development practices and how these can be improved to foster better logistics management at the project level.

BCs find suggestions of different logistics organization structures and suitable outsourcing arrangements. CERCs and LSPs can use the findings to understand their customers’ needs and adapt service offerings.

To the best of the authors’ knowledge, this study is one of the first studies of how two companies within a corporation can work together to develop construction logistics service offerings.

Performance framework (PF) is a well-established practice to measure innovation performance and identify improvement opportunities. However, whether PFs academic research are applicable to companies remains unclear, as well as their support in the definition of improvement actions. This study aims to present the implementation and assessment of a new and updated PF proposed in previous research in a real industrial context.

The PF was implemented through an in-depth case study carried out in a European machinery manufacturer and further assessed by practitioners.

The results indicate that the PF enabled the creation of a multidimensional view of the innovation performance and the definition of improvement projects in the company. Additionally, the findings also reveal an overall positive assessment of the PF by senior managers who work with the innovation process.

As a case study, this research is inherently limited in the extent to which results can be generalised. Thus, the analyses are reductive and rationalising. Future research is needed to assess the replicability of the PF.

The study's practical contribution is based on the combination of insights and steps that provide a straightforward and actionable approach for the company to improve performance.

This study aims to advance the importance of implementing the new and updated PF after its proposition, which is often overlooked in preceding research. Furthermore, the assessment of the PF also enables to infer its value to the company's employees.

By providing equal weight to buyers and sellers, the purpose of this paper is to enhance our understanding of the determinants underlying successful mergers and acquisitions (M&As) involving a specific segment of firms involved in such undertakings, i.e., knowledge-intensive innovative and entrepreneurial (KIE) firms.

A multiple case study, based on eight semi-structured interviews with CEOs representing acquirers and the acquired firms, investigates the focal phenomenon this study addresses.

The results suggest that knowledge-intensive, innovative and entrepreneurial firms promote entrepreneurial intentions and allow value creation of M&As through four overarching measures. These are buyer–seller fit, aligned incentives, long-term thinking and perpetual alliance.

The outcomes of this research may have limited generalizable due to the chosen research methodology. Therefore, this study recommends future studies testing the validity of these findings.

The authors have clarified the drawbacks of integration when being involved in M&As with KIE firms. These drawbacks primarily revolved around not eliminating the entrepreneurs’ autonomy and their routines, but it is also partly related to letting them keep their identity (i.e. their brand) as well as retaining employees’ trust in the new owner.

Contrary to most papers, this study has taken an approach giving equal weight to both buyers and sellers. In doing so, this study clarified the drawbacks of integration when it involves M&As with KIE firms.

Previous studies have postulated that an advance payment system (APS) positively impacts the contractor's working capital and is paramount to ensuring an efficient and effective project cash flow process. However, scant research has been undertaken to empirically establish the cash flow performance and domino effect of APS on project and organisational performance.

The epistemological design adopted a positivist philosophical stance augmented by deductive reasoning to explore the phenomena under investigation. Primary quantitative data were collected from 504 Construction Industry Development Board (CIDB) registered contractors (within the grade bandings 1–9) in South Africa. A five-point Likert scale was utilised, and subsequent data accrued were analysed using structural equation modelling (SEM).

Emergent findings reveal that the mandatory use of an APS does not guarantee a positive project cash flow, an improvement in organisational performance or an improvement in project performance.

The ensuing discussion reveals the contributory influence of APS on positive cash flow and organisational performance, although APS implementation alone will not achieve these objectives. Practically, the research accentuates the need for various measures to be concurrently adopted (including APS) towards ensuring a positive project cash flow and improved organisational and project performance.

There is limited empirical research on cash flow performance and the domino effect of APS on project and organisational performance in South Africa, nor indeed, the wider geographical location of Africa as a continent. This study addresses this gap in the prevailing body of knowledge.

This study aims to explore the impact of board size, board gender diversity and federation age on the likelihood of having a female chair in National Sports Federations (NSF).

A quantitative methodology compares 300 sports boards in five countries (Italy, Portugal, Spain, Turkey and the UK), using data collected from NSF’s websites.

The board size and federation age have no significant impact on having a female board chair when the countries and the percentage of female directors are included in the model. When the number of women is measured in absolute value rather than in relative terms, the only variable that predicts a woman chair is the country. When the model does not include country differences, the percentage of female directors is key in predicting a chairwoman, and when the number of women is used as a variable instead of the percentage, a board’s smaller size increases the odds of having a chairwoman.

There are some limitations to this study which we believe provide useful directions for future research. Firstly, the authors have not considered the role of gender typing in sports activities which explains the extent that women participate in specific sports (Sobal and Milgrim, 2019) and the related perception of such sports in society. The social representation of sports activities classified as masculine, feminine or gender-neutral can hypothetically influence women’s access to that specific federations’s leadership. The authors included the country factor only partially, as a control variable, as the social representation of sports usually goes beyond national boundaries.

This study has implications for sport policymakers and stakeholders, and for institutions such as the IOC or the European Union that implement equality policies. If the aim is to increase female presence in the highest position of a sports board and to achieve gender equality more generally, other policies need to be implemented alongside gender quotas for the sports boards, namely, those specifically related to the recruitment and selection of the sports board chairs (Mikkonen et al., 2021). For example, given the implications of critical mass and its ability to increase more female’s engagement then the role of existing chairs acting as mentors and taking initiative in this objective may be warranted. Furthermore, attention should be paid to the existing gender portfolio of each board and its subsequent influence on recruiting a female chair, regardless of the organization’s age. Knoppers et al. (2021) concluded that resistance to gender balance by board members is often related to discriminatory discourses against women. The normalization of the discourses of meritocracy, neoliberalism, silence/passivity about the responsibility of structures and an artificial defence of diversity emphasise that equality should not only be determined by women (Knoppers et al., 2021).

When countries are included in the model, the results suggest that the social representation of a female board member is different from that of a female board chair.

The originality of the study is that it shows the factors that constrain women taking up a chair position on NSFs. Theoretically, it contributes to existing literature by demonstrating how a critical mass of females on boards may also extend to the higher and most powerful position of chair.

In developing countries, how risk management technologies influence management accounting and control (MAC) practices is under-researched. By drawing on insights from institutional studies, this study aims to examine the multiple institutional pressures surrounding an entity and influencing its risk-based management control (RBC) system – that is, how RBC appears in an emerging market attributed to institutional multiplicity.

The authors used qualitative case study research methods to collect empirical evidence from a privately owned Egyptian insurance company.

The authors observed that in the transformation to risk-based controls, especially in socio-political settings such as Egypt, changes in MAC systems were consistent with the shifts in the institutional context. Along with changes in the institutional environment, the case company sought to configure its MAC system to be more risk-based to achieve its strategic goals effectively and maintain its sustainability.

This research provides a fuller view of risk-based management controls based on the social, professional and political perspectives central to the examined institutional environment. Moreover, unlike early studies that reported resistance to RBC, this case reveals the institutional dynamics contributing to the successful implementation of RBC in an emerging market.

The present study investigates the impact of digital entrepreneurial education and training and its impact on the digital entrepreneurial intention (EI) through the mediating character of entrepreneurial competence.

A total of 391 survey responses were collected from employees using convenient and snowball sampling methods.

Digital entrepreneurial education and training showed a positive influence on entrepreneurial competence and EI, with entrepreneurial competence mediating the relationship between digital entrepreneurial education and training practices and EI.

This study is intended to assist the development of digital entrepreneurs. The implications of this study are also useful for governments, entrepreneurs, venture capitalists, angel investors and various international development institutions.

The novelty of this study relates to exploring the relationship between digital entrepreneurial education and training, entrepreneurial competence and digital EI.

Climate change poses risks to society and the demand for carbon literacy within small and medium-sized enterprises is increasing. Skills and knowledge are required for organizational greenhouse gas accounting and science-based decisions to help businesses reduce transitional risks. At the University of Copenhagen and the University of Northern British Columbia, two carbon management courses have been developed to respond to this growing need. Using an action-based co-learning model, students and business are paired to quantify and report emissions and develop climate plans and communication strategies.

This paper draws on surveys of businesses that have partnered with the co-learning model, designed to provide insight on carbon reductions and the impacts of co-learning. Data collected from 12 respondents in Denmark and 19 respondents in Canada allow for cross-institutional and international comparison in a Global North context.

Results show that while co-learning for carbon literacy is welcomed, companies identify limitations: time and resources; solution feasibility; governance and reporting structures; and communication methods. Findings reveal a need for extension, both forwards and backwards in time, indicating that the collaborations need to be lengthened and/or intensified. Balancing academic requirements detracts from usability for businesses, and while municipal and national policy and emission targets help generate a general societal understanding of the issue, there is no concrete guidance on how businesses can implement operational changes based on inventory results.

The research brings new knowledge to the field of transitional climate risks and does so with a focus on both small businesses and universities as important co-learning actors in low-carbon transitions. The comparison across geographies and institutions contributes an international solution perspective to climate change mitigation and adaptation strategies.