Search results

This study aims to propose and evaluate the progress in the basic-pixel (a strategy to generate continuous trajectories that fill out the entire surface) algorithm towards performance gain. The objective is also to investigate the operational efficiency and effectiveness of an enhanced version compared with conventional strategies.

For the first objective, the proposed methodology is to apply the improvements proposed in the basic-pixel strategy, test it on three demonstrative parts and statistically evaluate the performance using the distance trajectory criterion. For the second objective, the enhanced-pixel strategy is compared with conventional strategies in terms of trajectory distance, build time and the number of arcs starts and stops (operational efficiency) and targeting the nominal geometry of a part (operational effectiveness).

The results showed that the improvements proposed to the basic-pixel strategy could generate continuous trajectories with shorter distances and comparable building times (operational efficiency). Regarding operational effectiveness, the parts built by the enhanced-pixel strategy presented lower dimensional deviation than the other strategies studied. Therefore, the enhanced-pixel strategy appears to be a good candidate for building more complex printable parts and delivering operational efficiency and effectiveness.

This paper presents an evolution of the basic-pixel strategy (a space-filling strategy) with the introduction of new elements in the algorithm and proves the improvement of the strategy’s performance with this. An interesting comparison is also presented in terms of operational efficiency and effectiveness between the enhanced-pixel strategy and conventional strategies.

This study aims to characterize the properties of natural cellulose fiber from the pseudo-stems of the curcuma zedoaria plant.

The fiber was extracted using the biological retting process (cold-water retting). The intrinsic fiber properties obtained were used to evaluate the possibility of using fiber for textile applications.

The average length of a curcuma zedoaria fiber was 34.77 cm with a fineness value of 6.72 Tex. A bundle of curcuma zedoaria fibers was comprised of many elementary fibers. Curcuma zedoaria had an irregular cross-section, with the lumen having a varied oval shape. Curcuma zedoaria fibers had tenacity and elongation value of 3.32 gf/denier and 6.95%, respectively. Curcuma zedoaria fibers had a coefficient of friction value of 0.46. Curcuma zedoaria fibers belong to a hygroscopic fiber type with a moisture regain value of 10.29%.

Extraction and Characterization of Curcuma zedoaria Pseudo-stems Fibers for Textile Application.

In the 21st century, placing higher education institutions in the global world has become the norm. Therefore, many higher education institutions in Ghana and across the globe have set out to internationalise or become world-class universities as part of their strategic ambitions. Thus, finding ways to become visible on a global scale and transcend beyond the countries in which they operate has become of major interest to most universities. The authors of this chapter were curious to determine how universities adopt imported organisational templates as a strategic ambition. One should not assume that the semblance of such imported concepts is mere institutional isomorphism stemming from internationalisation and globalisation. The study employed semi-structured interviews and institutional documents as data collection tools among ten (10) university actors in a flagship university in Ghana. The study used postcolonial theory to critically examine the drivers and current practices embedded in dominant hegemonic global discourses, such as internationalisation. The findings revealed that the drivers and reforms underpinning university internationalisation ambition are framed within economic rationalities, producing human capital, self-marketisation to promote visibility, and a quest for global competition couched within global neoliberal ideology. The study recommends the need for university actors to (re)focus and (re)evaluate university internationalisation discourse to ensure a balance between local relevance and global forces.

This study aims to present the variations of optimal seismic control of reinforced cement concrete (RCC) structure using different structural systems. Different third-dimensional mathematical models are used to examine the responses of multistory flexibly connected frames subjected to earthquake excitations.

This paper examined a G + 50 multi-storied high-rise structure, which is analyzed using different combinations of moment resistant frames, shear walls, seismic outrigger systems and seismic dampers to observe the effectiveness during ground motion against soft soil conditions. The damping coefficients of added dampers, providing both upper and lower levels are taken into consideration. A finite element modeling and analysis is generated. Then the nature of the structure exposed to ground motion is captured with response spectrum analysis, using BNBC-2020 for four different seismic zones in Bangladesh.

The response of the structure is investigated according to the amplitude of the displacements, drifts, base shear, stiffness and torsion. The numerical results indicate that adding dampers at the base level can be the most effective against seismic control. However, placing an outrigger bracing system at the middle and top end with shear wall can be the most effective for controlling displacements and drifts.

The response of high-rise structures to seismic forces in Bangladesh’s soft soil conditions is examined at various levels in this study. This study is an original research which contributes to the knowledge to build earthquake resisting high-rises in Bangladesh.

The psychological foundations of consumers’ reasons for product choices are analyzed in the field of marketing. The purpose of this research is to identify the implicit reasons for white meat consumption in the UK and Turkey.

In the scope of the means-end chain theory, in-depth interviews were conducted with individuals, and the reasons for consumers’ product preferences were revealed by moving from concrete to abstract.

It has been determined that the white meat consumption of Muslims in the UK is primarily shaped by their religious approach. In Turkey, on the contrary, both consumption patterns and reasons for preference are changing. It has been found that white meat consumption is associated with values such as security needs, satisfaction with life, self-fulfillment and happiness.

This research has contributed to the marketing literature by examining consumers’ implicit consumption reasons for white meat in the context of religion and culture.

Marketing strategies should focus on building trust in halal certification, particularly in the UK. Brands should associate their promotion strategies with feelings of security and happiness, which are associated in the minds of consumers.

This study is a new study in terms of revealing the connotations of consumers about consuming chicken and fish and showing the implicit needs that the brands can emotionally associate with.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.