Search results

The purpose of this paper is to design and develop half-mode substrate-integrated waveguide (HMSIW)- and quarter-mode substrate-integrated waveguide (QMSIW)-based antennas for wireless communication application. The developed antennas offer advantages in terms of compactness, high gain and better isolation between the ports.

Initially, the tri-band substrate-integrated waveguide-based antenna is designed using a slot on the ground plane. Then, the same structure has been bisected into two parts for the development of the HMSIW structure. Again the concept of the slot is used for the realization of a dual-band antenna. QMSIW-based structure is designed with further dividing HMSIW structure into two parts. Simulation has been carried out with the use of a high-frequency structure simulator (HFSS) software, which used a finite element-based solver for the full-wave analysis.

The proposed HMSIW-based dual-band antenna resonates at two different frequencies, namely, 5.81 GHz with 4.5 dBi gain and at 6.19 GHz with 6.8 dBi gain. Isolation between two ports is 20 dB. The overall dimensions of the proposed model are 0.39 λ × 0.39 λ. Similarly, QMSIW-based antenna is resonated at 5.66 GHz of the frequency with the 3 dBi gain. Frequency tuning is also carried out with the change in the slot dimension to use the proposed antenna in various C (4–8 GHz) band applications.

The proposed antennas can use C band wireless frequency application. The proposed structure provides better performance in terms of isolation between the ports, small size, high front-to-back ratio and higher gain. It is fabricated for the proof of concept with the RT Duroid 5880 substrate material having a 2.2 permittivity. Measured results show a similar kind of performance as a simulated one.

This paper aims to present, design and implement a novel half-mode substrate integrated waveguide (HMSIW)-based narrow bandpass filter, which offers advantages like low insertion loss, compact size and high selectivity. Proposed filter will be used in the K-band automotive radar application.

The filtering response in the proposed design is achieved by inserting inductive posts in the HMSIW cavity. Ansoft high frequency structure Simulator (HFSS) is used for the simulation of the proposed structure, which is a three-dimensional full-wave solver using the finite element method (FEM). The proposed filter is fabricated on the dielectric material RT duroid 5,880 with the dielectric constant ɛ_r = 2.2, dissipation factor t and = 4 × 10^–4 and height h = 0.508 mm.

Frequency tuning is also carried out by changing the lateral distance between two inductive posts. Moreover, a comparison of the proposed structure with the previously published work is presented. Proposed method provides the unique advantages such as low insertion loss, high selectivity and compact in size.

Indigenous method has been used for the development of the filter. Proposed filter will be used in transmitter subsystem of the K-band radar system operating at the center frequency of 11.2 GHz. Measurement results are well-matched with the simulated one. Obtained measured result shows return loss of 20.39 dB and insertion loss of 1.59 dB with 3 dB fractional bandwidth (FBW) of 2.58% at the center frequency of 11.2 GHz.

This paper aims to design a dual mode X-band substrate integrated waveguide (SIW) bandpass filter in the conventional SIW structure. A pair of back-to-back square and split ring resonator is introduced in the single-layer SIW bandpass filter. The various coupling configurations of SIW bandpass filter using split square ring slot resonator is designed to obtain dual resonant mode in the passband. It is shown that the measured results agree with the simulated results to meet compact size, lower the transmission coefficient, better reflection coefficient, sharp sideband rejection and minimal group delay.

A spurious suppression of wideband response is suppressed using an open stub in the transmission line. The width and length of the stub are tuned to suppress the wideband spurs in the stopband. The measured 3 dB bandwidth is from 8.76 to 14.24 GHz with a fractional bandwidth of 48.04% at a center frequency of 11.63 GHz, 12.59 GHz. The structure is analyzed using the equivalent circuit model, and the simulated analysis is based on an advanced design system software.

This paper discusses the characteristics of resonator below the waveguide cut-off frequency with their working principles and applications. Considering the difficulties in combining the resonators with a metallic waveguide, a new guided wave structure – the SIW is designed, which is synthesized on a planar substrate with linear periodic arrays of metallized via based on the printed circuit board.

This study has investigated the wave propagation problem of the SIW loaded by square ring slot-loaded resonator. The electric dipole nature of the resonator has been used to achieve a forward passband in a waveguide environment. The proposed filters have numerous advantages such as high-quality factor, low insertion loss, easy to integrate with the other planar circuits and, most importantly, compact size.