Search results

This article examines curatorial practices, both traditional and digital, in the Guizhou Provincial Museum’s ethnic exhibition to assess their effectiveness in representing ethnic minority cultures, fostering learning and inspiring curiosity about ethnic textiles and costumes and associated cultures. It also explores audience expectations concerning digital technology use in future exhibitions.

A mixed-methods approach was employed, where visitor data were collected through questionnaires, together with interviews with expert, museum professionals and ethnic minority textile practitioners. Their expertise proved instrumental in shaping the design of the study and enhancing the overall visitor experience, and thus fostering a deeper appreciation and understanding of ethnic minority cultures.

Visitors were generally satisfied with the exhibition, valuing their educational experience on ethnic textiles and cultures. There is a notable demand for more immersive digital technologies in museum exhibitions. The study underscores the importance of participatory design with stakeholders, especially ethnic minority groups, for genuine and compelling cultural representation.

This study delves into the potentials of digital technologies in the curation of ethnic minority textiles, particularly for enhancing education and cultural communication. Ethnic textiles and costumes provide rich sensory experience, and they carry deep cultural significance, especially during festive occasions. Our findings bridge this gap; they offer insights for museums aiming to deepen the visitor experiences and understanding of ethnic cultures through the use of digital technologies.

Human group behavior is the driving force behind many complex social and economic phenomena. Few studies have integrated multi-dimensional travel patterns and city interest points to construct urban security risk indicators. This paper combines traffic data and urban alarm data to analyze the safe travel characteristics of the urban population. The research results are helpful to explore the diversity of human group behavior, grasp the temporal and spatial laws and reveal regional security risks. It provides a reference for optimizing resource deployment and group intelligence analysis in emergency management.

Based on the dynamics index of group behavior, this paper mines the data of large shared bikes and ride-hailing in a big city of China. We integrate the urban interest points and travel dynamic characteristics, construct the urban traffic safety index based on alarm behavior and further calculate the urban safety index.

This study found significant differences in the travel power index among ride-sharing users. There is a positive correlation between user shared bike trips and the power-law bimodal phenomenon in the logarithmic coordinate system. It is closely related to the urban public security index.

Based on group-shared dynamic index integrated alarm, we innovatively constructed an urban public safety index and analyzed the correlation of travel alarm behavior. The research results fully reveal the internal mechanism of the group behavior safety index and provide a valuable supplement for the police intelligence analysis.

This study aims to examine the influence of the derived attributes of embedded artificial intelligence-mobile smart speech recognition (AI-MSSR) technology, namely perceived usefulness, perceived ease of use (PEOU) and perceived enjoyment (PE) on consumer purchase intention (PI) through the chain relationships of attitudes to AI and consumer smart experience, with the moderating effect of consumer innovativeness and Generation (Gen) X and Gen Y in fashion retail.

The study employed a quantitative survey strategy, drawing a sample of 836 respondents from Sri Lanka and India representing Gen X and Gen Y. The data analysis was carried out using smart partial least squares structural equation modelling (PLS-SEM).

The findings show a positive relationship between the perceived attributes of MSSR and consumer PI via attitudes towards AI (AAI) and smart consumer experiences. In addition, consumer innovativeness and Generations X and Y have a moderating impact on the aforementioned relationship. The theoretical and managerial implications of the study are discussed with a note on the research limitations and further research directions.

To multiply the effects of embedded AI-MSSR and consumer PI in fashion retail marketing, managers can develop strategies that strengthen the links between awareness, knowledge of the derived attributes of embedded AI-MSSR and PI by encouraging innovative consumers, especially Gen Y consumers, to engage with embedded AI-MSSR.

This study advances the literature on embedded AI-MSSR and consumer PI in fashion retail marketing by providing an integrated view of the technology acceptance model (TAM), the diffusion of innovation (DOI) theory and the generational cohort perspective in predicting PI.

To know the digital competence of rural teachers to carry out the tutoring process with members of the educational community through digital resources (teacher-student, teacher-families and teacher-teaching team). As specific objectives, gender, teaching specialties, interaction between gender*teaching speciality, and significant predictors were analysed.

The research was quantitative, with a non-experimental, cross-sectional, descriptive and inferential design.

The results showed an explorer-expert teacher, where the generalist teachers had a superior competence compared to the rest of the specialties. Gender and teaching speciality were significant predictors in the communication that the teacher has with all the agents involved, while the interaction of both predictors was only significant between the teacher-teaching team and teacher-families.

Another issue worth considering relates to the development of the classification tree for the use of digital resources in tutorial action. Due to lack of space, the proposal has focused on gender and particular subjects, but it would be interesting to focus on the dimensions of the instrument with regard to tutorial action with the different agents (students, teaching staff and families).

After reviewing the literature, the authors can conclude that very little quantitative research is focused on the level of self-perception of digital competence of teachers in rural schools. Furthermore, the teaching speciality of teachers has up until now hardly been taken into account as a variable that can determine the levels of digital competence. Not many studies have analysed the use of digital resources to communicate with the different members of the educational community.

Following the imperative for human-centric digital innovation brought by the paradigm of Industry 5.0, the article aims to integrate the dispersed and multi-disciplinary literature on individual risks for workers to define, explain and predict individual risks related to Industry 4.0 technologies.

The paper follows the question, “What is the current knowledge and evidence base concerning risks related to Industry 4.0 technologies, and how can this inform digital innovation management in the manufacturing sector through the lens of the Industry 5.0 paradigm?” and uses the method of systematic literature review to identify and discuss potential risks for individuals associated with digital innovation. N = 51 contributions met the inclusion criteria.

The literature review indicates dominant trends and significant gaps in understanding risks from a human-centric perspective. The paper identifies individual risks, their interplay with different technologies and their antecedents at the social, organizational and individual levels. Despite this, the paper shows how the literature concentrates in studying risks on only a limited number of categories and/or concepts. Moreover, there is a lack of consensus in the theoretical and conceptual frameworks. The paper concludes by illustrating an initial understanding of digital innovation via a human-centered perspective on psychological risks.

Findings yield practical implications. In investing in the adoption, generation or recombination of new digital technologies in organizations, the paper recommends managers ensure to prevent risks at the individual level. Accordingly, the study’s findings can be used as a common starting point for extending the repertoire of managerial practices and interventions and realizing human-centric innovation.

Following the paradigm of Industry 5.0, the paper offers a holistic view of risks that incorporates the central role of the worker as crucial to the success of digital innovation. This human-centric perspective serves to inform the managerial field about important factors in risk management that can result in more effective targeted interventions in risk mitigation approaches. Lastly, it can serve to reinterpret digital innovation management and propose future avenues of research on risk.

A wide gap exists between the innovation and development of self-monitoring, analysis and reporting technology (SMART) technologies and the actual adoption by older adults or those caring for them. This paper aims to increase awareness of available technologies and describes their suitability for older adults with different needs. SMART technologies are intelligent devices and systems that enable autonomous monitoring of their status, data analysis or direct feedback provision.

This is a scoping review of SMART technologies used and marketed to older adults or for providing care.

Five categories of SMART technologies were identified: (1) wearable technologies and smart tools of daily living; (2) noninvasive/unobtrusive technology (i.e. passive technologies monitoring the environment, health and behavior); (3) complex SMART systems; (4) interactive technologies; (5) assistive and rehabilitation devices. Technologies were then linked with needs related to everyday practical tasks (mainly applications supporting autonomous, independent living), social and emotional support, health monitoring/managing and compensatory assistance rehabilitation.

When developing, testing or implementing technologies for older adults, researchers should clearly identify concrete needs these technologies help meet to underscore their usefulness.

Older adults and caregivers should weigh the pros and cons of different technologies and consider the key needs of older adults before investing in any tech solution.

SMART technologies meeting older adult needs help support both independent, autonomous life for as long as possible as well as aiding in the transition to assisted or institutionalized care.

This is the first review to explicitly link existing SMART technologies with the concrete needs of older adults, serving as a useful guide for both older adults and caregivers in terms of available technology solutions.

Key to transnational higher education (HE) cooperation is building trust to allow for seamless recognition of studies. Building on the Tuning Educational Structures initiative (2001) and lessons learnt from the Organisation for Economic Cooperation and Development (OECD)-Assessment of Learning Outcomes in Higher Education (AHELO) feasibility study, this paper offers a sophisticated approach developed by the European Union (EU)-co-financed project Measuring and Comparing Achievements of Learning Outcomes in Europe (CALOHEE). These evidence the quality and relevance of learning by applying transparent and reliable indicators at the overarching and disciplinary levels. The model results allow for transnational diagnostic assessments to identify the strength and weaknesses of degree programmes.

The materials presented have been developed from 2016 to 2023, applying a bottom-up approach involving approximately 150 academics from 20+ European countries, reflecting the full spectrum of academic fields. Based on intensive face-to-face debate and consultation of stakeholders and anchored in academic literature and wide experience.

As a result, general (overarching) state-of-the-art reference frameworks have been prepared for the associated degree, bachelor, master and doctorate, as well as aligned qualifications reference frameworks and more detailed learning outcomes/assessment frameworks for 11 subject areas, offering a sound basis for quality assurance. As a follow-up, actual assessment formats for five academic fields have been developed to allow for measuring the actual level of learning at the institutional level from a comparative perspective.

Frameworks as well as assessment models and items are highly innovative, content-wise as in the strategy of development, involving renown academics finding common ground. Its value is not limited to Europe but has global significance. The model developed, is also relevant for micro-credentials in defining levels of mastery.

This study aims to examine the share of foreign direct investment (FDI) in creating the value added (VA) of innovative and other industries in Poland in 2004–2020.

In terms of the empirical analysis of FDI stocks, their locations were divided into innovative and other industries. The differences in the creation of VA are presented by domestic and foreign enterprises. The impact of FDI stocks in individual industries on gross domestic product (GDP) changes was assessed using the vector error correction model (VECM).

FDI from innovative industries generated approx. 7% VA of the Polish economy in the years 2004–2020. In 2009–2018, the share of VA of foreign enterprises in innovative industries in Poland showed a faster growth (by 5 pp) than in other industries. The results of decomposition confirm that the level of explanation of GDP by FDI in innovative industries is higher than in other industries.

Changes in the classification of activities reduce the time series period available.

This study explains the participation of foreign and domestic enterprises in creating VA. The results are useful to pursuing the national investment policy.

The economic results of domestic and foreign enterprises in the host country affect the economic growth and development and ultimately the socio-economic conditions of life.

This work provides some additional explanations for the inconclusive results of international research into the impact of FDI on GDP or the spillovers effects. Its usefulness concerns the detailed impact of FDI by industrial structures on GDP.

The study aimed at identifying the degree of professional competence of faculty members from the students’ perspective at Kuwait and Palestine Technical University Kadoorie, and identifying the effect of the variables of gender and academic year.

The researchers developed a 24-item questionnaire and administered it to 115 students each from Kuwait (male: 57, female: 58) and Palestine Technical University Kadoorie (male: 21, female: 94). The study used a descriptive approach to analyze the collected data.

According to the students' perspective, the average professional competence of faculty members at Kuwait University is 2.74 for the teaching competencies, 2.29 for the technology competencies, 2.65 for the evaluation competencies and 2.71 for the human competencies. Similarly, at Palestine Technical University Kadoorie, the mean of the professional competencies of faculty members from the students' perspective is 2.31 for the teaching competencies, 1.96 for the technology competencies, 2.24 for the evaluation competencies and 2.34 for the human competencies. There were significant differences in the degree of professional competence at Kuwait and Palestine Technical University Kadoorie due to the gender of all domains in favor of females. There were significant differences in the degree of professional competence in Kuwait due to the academic year of the technology domain between the first year and second year, in favor of the second year. There were significant differences due to the variable of the academic year of the human domain between the first year and the third year, in favor of the third year. There were significant differences in the degree of professional competence at Palestine Technical University Kadoorie due to the academic year of the technology domain (second, third, fourth year and more) and second year, in favor of (the second year). There were significant differences due to the academic year of the human domain between the first and second year, in favor of second year.

The authors hope that their findings will inspire further research in this area and help universities to better support their faculty members and improve student outcomes.

This paper examines how different configurations of societal impact are pursued by purpose-driven organizations (PDOs) and how these configurations align with the application of varying supply chain design (SCD) practices.

This multi-method study uses quantitative data from 1588 B Corps and qualitative data from 316 B Corps to examine how PDOs align SCD with the pursuit of diverse types of societal impact. The authors first conduct a cluster analysis to group organizations based on the impact they create. Second, qualitative content analysis connects impact with enabling SCD elements.

The analysis of the five identified clusters provides detailed empirical insights on influencers, design decisions and building blocks adopted by PDOs to drive a range of societal impacts. Specifically, the nature of the impact pursued affects (1) whether a PDO will be more influenced by a need in the political environment or an opportunity in the industry environment, (2) the relative importance of the design of social flows versus material flows and (3) the need to develop new relational resources with beneficiaries versus leveraging existing capabilities to manage inter-firm processes.

This study responds to calls to disaggregate different dimensions of societal impact and examines the relationship between SCD and a breadth of sustainability impacts for different stakeholders. In doing so, the authors identify four SCD pathways organizations can follow to achieve specific societal impacts. This study is also the first to employ a supply chain perspective in the study of certified B Corps.