Search results

Cesspits are the means for each house to dispose of wastewater in the Bani Kinanah District (BKD) of Jordan, which creates severe environmental complications. This research aimed to find a suitable site for a wastewater treatment plant (WWTP) in BKD.

Geographic Information System (GIS)-based multicriteria decision analysis (MCDA) was used for an optimal site selection for a sewage treatment plant. Several datasets were obtained to prepare the maps of the criteria influencing the choice of the most suitable site for the WWTP. The analytic hierarchy process was used to apply the weights for each factor.

Five classes of suitability were generated: 0.23% very high suitability, 8.49% high suitability, 47.12% moderate suitability, 37.67% low suitability and 6.49% very low suitability. According to Analytical Hierarchy Process (AHP) results, the elevations, slope and groundwater depth have high importance; where their weights 21%, 19% and 17%, respectively. The most suitable site for establishing a WWTP was found in the northern part of the study area, where it is characterized by relatively low elevations (−90 to −93 m), low slope (0–2.5 %), distance from groundwater level (47–82 m) and the space is sufficient for building the plant (25328 m², 8861 m² and 8586 m²).

This research is limited by the availability of data.

The research is invaluable for decision makers involved in urban planning.

Wastewater treatment plants are essential for communities with limited resources such as Jordan. It has also profound impacts on the surrounding environment.

From the present study, it can be concluded that GIS is essential in urban utility establishment, like urban domestic wastewater treatment site selection. Although the study area has adequate potential areas for establishing WWTP, further assessment of flood vulnerability, wastewater amount quantification, population growth and urban expansion must be seriously considered before implementation.

This study aims to provide a new method for precisely sizing photovoltaic (PV) arrays for standalone, direct pumping PV Water Pumping (PVWP) systems for irrigation purposes.

The method uses historical weather data and considers daily variability in regional temperatures and rainfall, crop evapotranspiration rates and seasonality effects, all within a nonparametric bootstrapping approach to synthetically generate daily rainfall and crop irrigation needs. These needs define the required daily supply of pumped water to achieve a user-specified level of reliability, which provides the input to an intuitive approach for PV array sizing. An economic comparison of the costs for the PVWP versus a comparably powered diesel generator system is provided.

Pumping 22.8646 m³/day of water would meet the pasture crop irrigation needs on a one-acre (4046.78 m²) tract of land in South Florida, with 99.9% reliability. Given the specified assumptions, an 8.4834 m² PV array, having a peak power of 1.1877 (kW), could provide the 1.2347 (kWh/day) of hydraulic energy needed to supply this volume over a total head of 20 meters. The PVWP system is the low-cost option when diesel prices are above $0.90/liter and total installed PV array costs are fixed at $2.00/Watt peak power or total installed PV array costs are below $1.50/Watt peak power and diesel prices are fixed at $0.65/liter.

Because the approach is not dependent on the shapes of the sampling distributions for regional climate factors and can be adapted to consider different types of crops, it is highly portable and applicable for precisely determining array sizes for standalone, direct pumping PVWP systems for irrigating diverse crop types in diverse regions.

The effects of population growth in the developing world and climate change have increased the stress on available water resources. The majority of Rajshahi city, Bangladesh, is facilitated with groundwater withdrawal. As Bangladesh is a country of monsoon climate, reserved rainwater can be contributed as an alternative to extracted groundwater. This study aims to develop a framework for rooftop rainwater harvesting (RRWH) for domestic purposes and estimate the appropriate size of the storage tanks and their costs required to fulfill the annual drinking and cooking water demands through RRWH in Rajshahi city of Bangladesh.

A total of 100 single-story residential dwellings with varying rooftop areas were surveyed for the projection of RRWH potential. The relationship between the size and cost of a water tank and the rooftop areas of different houses is expressed using a general mathematical equation. Cost estimates for the proposed RRWH system for all houses have been completed, and a cost model illustrating the relationship between rooftop or catchment area and associated cost of RRWH system has been developed.

This study reveals that a maximum of 110.75 m³/year rainwater can be collected from a 100 m² rooftop area of Rajshahi city. Moreover, this study finds that such harvesting of rainwater can reduce municipal water supply to the extent of almost 75%. Water samples collected from rooftops also revealed that if germs were removed through bacteria treatment, the collected rainwater potentially can be used for drinking and cooking purposes.

The novelty of this study is that it focused mainly on how significant RRWH can be to meet people’s daily required amount of water for household purpose and ascertain the cost reduction using the RWH method. This paper also is unique as it assessed the volume of the storage tank that is sufficient to distribute the necessary amount of water for drinking and cooking purpose as a sustainable alternative source in the dry season.

To solve the instability problem of Zhangjiayao landslide caused by rainfall, the internal mechanism of slope instability and the supporting effect of anti-slide piles are studied. The research results can provide theoretical basis for the prevention and control of loess landslides.

A three-dimensional finite element model of Zhangjiayao landslide is established by field geological survey, laboratory test and numerical simulation.

The results show that Zhangjiayao landslide is a loess-mudstone contact surface landslide, and rainfall leads to slope instability and traction landslide. The greater the rainfall intensity, the faster the pore water pressure of the slope increases and the faster the matrix suction decreases. The longer the rainfall duration, the greater the pore water pressure of the slope and the smaller the matrix suction. Anti-slide pile treatment can significantly improve slope stability. The slope safety factor increases with the increase of embedded depth of anti-slide pile and decreases with the increase of pile spacing.

Based on the unsaturated soil seepage theory and finite element strength reduction method, the failure mechanism of Zhangjiayao landslide was revealed, and the anti-slide pile structure was optimized and designed based on the pile-soil interaction principle. The research results can provide theoretical basis for the treatment of loess landslides.

1. A three-dimensional finite element model of Zhangjiayao landslide is established.

2. Zhangjiayao landslide is a loess-mudstone contact surface landslide.

3. The toe of Zhangjiayao slope is first damaged by heavy rainfall, resulting in traction landslide.

4. The deformation of Zhangjiayao slope is highly dependent on rainfall intensity and duration.

5. The anti-slide pile can effectively control the continuous sliding of Zhangjiayao slope.

A three-dimensional finite element model of Zhangjiayao landslide is established.

Zhangjiayao landslide is a loess-mudstone contact surface landslide.

The toe of Zhangjiayao slope is first damaged by heavy rainfall, resulting in traction landslide.

The deformation of Zhangjiayao slope is highly dependent on rainfall intensity and duration.

The anti-slide pile can effectively control the continuous sliding of Zhangjiayao slope.

Today, as we hurtle towards imminent planetary destruction in the age of the Anthropocene, we believe it may be instructive to try and understand if the ancient science of spirituality can prove useful in humankind's ability to change course, even at this late hour. We argue that such a paradigm shift is critically essential for human survival and that without the inner transformation proposed by this science, it may prove impossible to build a society based on the principles of liberty, equality and fraternity. This chapter draws from foundational texts and authoritative sources across multiple religious traditions, based upon which it outlines a brief sketch of the ancient science of spirituality. We begin with an account of the differentia specifica of this science, where we delve into what kind of science this is. Since it is centrally concerned with inner transformation, we briefly outline the theory of change embedded in this science and the kind of rejuvenation it enables, which makes it possible for us to clearly perceive the key elements and the structure of reality. We then spell out the impact this has on the nature of human action, continually teasing out implications for policy and practice in our time. We provide a few concrete illustrations of the same. Inter alia, we also show how many of these insights can be found even within modern scientific and philosophical traditions, thereby indicating possibilities of convergence and synthesis between ancient and modern science, following thereby the guidance of genuine spirituality.

The study attempts to estimate farm subsidies the governments can save by transitioning to a millet-based production system, replacing GHG emission-intensive crops.

It updates a 131 × 131 commodity input–output (IO) table of the year 2015–16 into 2021–22 using the RAS procedure and simulates the economy-wide impacts of replacing rice and wheat with pearl millet and sorghum using consumption and production approaches. It then quantifies fertilizer, electricity and credit subsidy expenses the government can save through this intervention. It also estimates the potential reduction in GHG emissions that the transition could bring about. India is taken as a case.

Results show pearl millet expansion brings greater benefits to the government. It is estimated that when households return to their pearl millet consumption rates that prevailed in the early-reform period, this could save the Indian government Rs. 622 crores (USD 75 m). The savings shall be reinvested in agriculture to finance climate adaptation/mitigation efforts, contributing to a sustainable food system. Net GHG emissions also decline by 3.3–3.6 MMT CO2e.

Indian government has been actively aiming to bring down paddy areas since 2013–14 through the Crop Diversification Program and promoting millets (and pulses and oilseeds) on these farms. The prime reason is to check rapidly declining groundwater irrigation in Green Revolution states. Regulations in the past in these states have not brought the intended results. Meanwhile, electricity and fertilizers are heavily subsidized for agriculture. A slight shift in the cropping system can help conserve these resources. Meanwhile, GHG emissions could also be brought down and subsidies could well be saved. The results of the study indicate the same.

A less warm society is what governments and nongovernment organizations across the world are aiming for at present. Financial implications affect actions against climate change to a greater extent, apart from technological innovations. The effects of policy strategies discussed in the study, taking a large country as a case, when implemented appropriately around the regions, could help move a step closer to action against climate change.

The paper addresses a key but rarely explored research issue – that how a climate-sensitive crop choice will help reduce the government’s fiscal burden to finance climate adaption/mitigation. It also offers a mechanism to estimate the benefits within an economy-wide framework.

The study aims to identify the possible risk factors for electricity grids operational disruptions and to determine the most critical and influential risk indicators.

A multi-criteria decision-making best-worst method (BWM) is employed to quantitatively identify the most critical risk factors. The grey causal modeling (GCM) technique is employed to identify the causal and consequence factors and to effectively quantify them. The data used in this study consisted of two types – quantitative periodical data of critical factors taken from their respective government departments (e.g. Indian Meteorological Department, The Central Water Commission etc.) and the expert responses collected from professionals working in the Indian electric power sector.

The results of analysis for a case application in the Indian context shows that temperature dominates as the critical risk factor for electrical power grids, followed by humidity and crop production.

The study helps to understand the contribution of factors in electricity grids operational disruptions. Considering the cause consequences from the GCM causal analysis, rainfall, temperature and dam water levels are identified as the causal factors, while the crop production, stock prices, commodity prices are classified as the consequence factors. In practice, these causal factors can be controlled to reduce the overall effects.

From the results of the analysis, managers can use these outputs and compare the risk factors in electrical power grids for prioritization and subsequent considerations. It can assist the managers in efficient allocation of funds and manpower for building safeguards and creating risk management protocols based on the severity of the critical factor.

The research comprehensively analyses the risk factors of electrical power grids in India. Moreover, the study apprehends the cause-consequence pair of factors, which are having the maximum effect. Previous studies have been focused on identification of risk factors and preliminary analysis of their criticality using autoregression. This research paper takes it forward by using decision-making methods and causal analysis of the risk factors with blend of quantitative and expert response based data analysis to focus on the determination of the criticality of the risk factors for the Indian electric power grid.

This paper aims to conduct a detailed analysis of the industrial practices currently being used in the geothermal energy industry and to determine whether they are contributing to any limitations. A HAZOP-based upgradation model for improvement in existing industrial practices is proposed to ensure the removal of inefficient conventional practices. The HAZOP-based upgradation model examines the setbacks, identifies its causes and consequences and suggests improvement methods comprising of modern-day technology.

This paper proposed a HAZOP-based upgradation model for improvement in existing industrial practices. The proposed HAZOP model identifies the drawbacks brought on by conventional practices and suggests improvements.

The study reviewed the challenges geothermal power plants currently face due to conventional practices and suggested a total of 22 upgradation recommendations. From those, a total of 11 upgradation modules comprising modern digital technology and Industry 4.0 elements were proposed to improve the existing practices in the geothermal energy industry. Autonomous robots, augmented reality, machine learning and Internet of Things were identified as useful methods for the upgradation of the existing geothermal energy system.

If proposed recommendations are incorporated, the efficiency of geothermal energy generation will increase as cumulating setbacks will no longer degrade the work output.

The proposed recommendation by the study will make way for Industry 4.0 integration with the geothermal energy sector.

The paper uses a proposed HAZOP-based upgradation model to review issues in existing industrial practices of the geothermal energy sector and recommends solutions to overcome operability issues using Industry 4.0 technologies.

This research aims to develop sustainable development scores at districts level based on weights of thirteen sub-indicators using a spatial information system.

The empirical study was conducted at seven districts in the state of Terengganu Malaysia. The evaluation was implemented using a spatial information system combined with weights of sub-indicators that were computed from the analytic hierarchy process (AHP) method.

In this study the sub-indicators layers overlaid into one raster layer to produce a sustainability development score from 1 to 3 for every district. The one raster layer shows that Marang district received the highest sustainable development score of 2.284. On the other hand, Kemaman district received the poorest sustainable development score of 1.686.

In this study the weights that obtained from the AHP method are verified and validated using a sensitivity analysis. The scores at districts level perhaps may not be accurate due to difficulties in differentiating the variability of indicators and sub-indicators. These are among the unsettled issues that could be explored as future research direction.

The results would have greatly benefited the policy makers and stakeholders, particularly in planning for future development without compromising the significance of environment, social and economic indicators.

Sustainable development is one of the key elements that needs to be considered seriously in assessing development of a country. The assessment may include proposing indices for environment, social, economic indicators and related sub-indicators of sustainable development. Instead of considering specific indices for indicators, this approach departs more formally from the concept of unweighted indices at country level.

There is an urgent need to develop climate-smart agrosystems capable of mitigating climate change and adapting to its effects. Conventional agricultural practices prevail in Mauritius, whereby synthetic chemical fertilizers, pesticides and insecticides are used. It should be noted that Mauritius remains a net-food importing developing country of staple food such as cereals and products, roots and tubers, pulses, oil crops, vegetables, fruits and meat (FAO, 2011). In Mauritius, the agricultural sector faces extreme weather conditions like drought or heavy rainfall. Moreover, to increase the crop yields, farmers tend to use 2.5 times the prescribed amount of fertilizers in their fields. These excess fertilizers are washed away during heavy rainfall and contaminate lakes and river waters. By using smart irrigation and fertilization system, a better management of soil water reserves for improved agricultural production can be implemented. Soil Nitrogen, Phosphorus and Potassium (NPK) content, humidity, pH, conductivity and moisture data can be monitored through the cloud platform. The data will be processed at the level of the cloud and an appropriate mix of NPK and irrigation will be used to optimise the growth of the crops. Machine learning algorithms will be used for the control of the land drainage, fertilization and irrigation systems and real time data will be available through a mobile application for the whole system. This will contribute towards the Sustainable Development Goals (SDGs): 2 (Zero Hunger), 11 (Sustainable cities and communities), 12 (Responsible consumption and production) and 15 (Life on Land). With this project, the yield of crops will be boosted, thus reducing the hunger rate (SDG 2). On top of that, this will encourage farmers to collect the waters and reduce fertilizer consumption thereafter sustaining the quality of the soil on which they are cultivating the crops, thereby increasing their yields (SDG 15).