Search results

It is estimated that the largest share of future food fish will come from aquaculture production and that sustainable aquaculture is a precondition to realising this potential. Sustainable aquaculture will also play a key role in achieving several of the targets set out in SDG14. It is now established that most of the aquafeed ingredients used today are not sustainable and cannot support the projected growth of the sector, hence the need for sustainable alternatives. Sustainable aquaculture is multidimensional, therefore, this chapter focuses on sustainable feed ingredient sourcing. The authors explored a group of highly promising emerging novel ingredients known as microbial ingredients (MIs), means of producing them and how they can help achieve sustainable aquaculture and SDG14 targets. Specifically, the chapter narrows down on producing MIs from Norwegian spruce tree hydrolysates using a biotechnological approach and how Foods of Norway, a centre for research-based innovation at the Norwegian University of Life Sciences is leading efforts to produce feed-worthy MIs from industrial and agricultural by-products through biotechnology-based valorisation. MIs such as yeast, fungi, and bacterial meal can support the growth of Atlantic salmon without compromising the health of the fish. Thus, MI has a net positive impact on climate and can help achieve some targets in SDG14 by reducing pressure on marine resources used as fish feed ingredients. Suggestions on how to address current bottlenecks in scaling up MIs have also been provided in the chapter.

This paper aims to assess the efficiency of emulsified essential oils in glycerol as eco-friendly antimicrobial and plasticized agents added to the biopolymer of gelatin for lining historical oil paintings on canvases.

Cedar oil, cinnamon oil and their mixtures were emulsified in glycerol and incorporated into gelatin adhesive as green biocides and plasticizers. Physical, biological, chemical and mechanical tests were conducted on experimental mock-ups to assess the gelatin-based adhesive formulations for the reinforcement of canvas supports. Scanning electron microscope, colorimetric measurements, antimicrobial activity test, attenuated total reflection-Fourier transform infrared spectroscopy, tensile strength and elongation tests were carried out on the mock-ups before and after the artificial aging.

The formulations of gelatin-based adhesive with cinnamon and cinnamon-cedar mixture emulsified in glycerol proved their efficiency on the antimicrobial activity test, chemically delaying the decomposition of gelatin and accordingly providing compatible mechanical properties. Gelatin-based adhesive with emulsified cinnamon oil showed a slight yellowing that was quite improved with the mixture of the cinnamon-cedar-based adhesive formulation.

This study promotes a green approach to lining historical oil paintings by developing green formulations from bio-based origins that minimize the shrinkage and microbial infection of gelatin for lining paintings.

In November 2022, the commercial company, OpenAI, launched ChatGPT. Since then, university students have rapidly become regular users of this artificial intelligence (AI) platform. One reason for this is the powerful capability of this generative AI tool to produce textual content, which in many cases, is almost indistinguishable from human-generated content. Another reason is that ChatGPT easily gives anyone access to knowledge. However, there is a problem as the vast majority of its users have no idea how this AI platform works and thus overlook the importance of thinking critically about information communicated in ChatGPT. While some call for banning this generative AI tool, this study aims to provide evidence that science classrooms can become scenarios where students find explicit, concrete, and realistic opportunities to critically evaluate scientific information generated by ChatGPT.

An intervention study was conducted with 55 students (26 females and 29 males, 17–24 years old) during a university Spanish-English bilingual science course taught within an active learning environment. The data consist of the written critiques of the students about Spanish-English bilingual scientific texts produced by ChatGPT.

Results indicate that the intervention had a positive effect on students’ abilities to construct sound arguments in Spanish and in English while judging the quality of scientific texts produced by this AI bot. Moreover, the findings suggest that the intervention enriched students’ skills to make improvements to texts produced by this generative AI tool.

The evidence provided in this study contributes to the exploration of possibilities to help students become critical users of ChatGPT.

This study examines the preparedness and responsiveness of Malaysian academic librarians in handling disruptions in library services during a disaster.

This qualitative approach involved semi-structured interviews with decision-makers, chief librarians and library managers from five selected public universities.

Thematic and qualitative data analysis produced several key themes based on (1) disaster preparedness involving policies, plans, asset protection, risk management, coordination of disaster management and preparative measures; and (2) disaster response involving strategies for information and communication access, community engagement, emergency response teams and procedures, and resource availability.

The findings are expected to be useful for policymakers in formulating policies and guidelines for library disaster management plans.

The interruptions of academic library services during a disaster may result in the disruption of the information sources and social information networks of students, academics and researchers alike. Effective disaster management is also the library’s responsibility to protect collections that belong to society at large.

This is one of the first attempts in disaster management research to focus on the preparedness and responses of academic libraries in Malaysia in the face of disasters. Therefore, the results of this study can be used as a baseline for policymakers to prepare policies, guidelines and manuals for management in the event of a disaster.

This study aims to investigate profoundly the protection of oil painting from deterioration using molybdenum trisulphide quantum dots (MoS3 QDs) against microbe, dirt accumulation and ultraviolet (UV) degradation.

The protection of painting against different deterioration factors necessitates the sustainable methods and advanced techniques. Scanning electron microscopy and transmission electron microscopy have been used to investigate the morphological structure of the painting and MoS3 QDs, respectively, and optical microscopy was used to examine antibacterial activity of MoS3 QDs towards different types of bacteria. To investigate the protection of painting against deterioration, the Fourier transform IR spectroscopy (FTIR) was used to investigate the paintings left in open air for a year. Chemical composition and crystal structure of MoS3 QDs have been studied using X-ray diffraction and X-ray photoelectron spectroscopy analysis, respectively.

The addition of MoS3 nanoparticles into painted coatings enhances the durability of linseed oil-based paintings toward UV ageing regarding the change in colour which confirmed by FTIR analysis. The protection of oil painting opposed to various deterioration factors was developed by involving of MoS3 QDs in the coating of the painting. Antibacterial effect of MoS3 QDs was tested against different types of bacteria such as Pseudomonas aeruginosa confirming that the MoS3 QDs involved in the coatings of oil paintings produces a high protection layer for the paintings against several microbial attacks. In addition, coatings containing MoS3 QDs reduce the accumulation of dirt on oil paintings when subjected to open air for a year.

The novel MoS3 QDs was used to form a protective and transparent coating layer for the oil painting to overcome the deterioration, displays the promising protection and can be applied for different oil paintings.

Ensuring high water quality is crucial for safeguarding public health, as contaminated water can pose significant risks to consumers’ well-being. This study aims to evaluate the microbiological and chemical quality of bottled water brands commonly consumed in Dodoma, Tanzania.

A total of 36 samples from 12 brands were collected between January and March 2023 and analyzed for microbiological and general water quality parameters.

Microbial analysis found that 42% of brands tested positive for coliform bacteria, while opportunistic pathogens Aeromonas hydrophila and Pseudomonas aeruginosa were detected in 25% and 17% of samples, respectively. For chemical composition, 42% of brands exceeded the World Health Organization guideline value of 1.5 mg/L for fluoride. However, no other parameters exceeded national drinking water standards. Statistical analysis revealed significantly higher measured fluoride levels compared to values declared on product labels (paired t-test, p = 0.003). A moderate positive correlation between fluoride and conductivity (r = 0.52, p = 0.045) indicated possible geological influences on water chemistry.

To enhance the study’s comprehensiveness, exploring temporal and spatial variations among water brands, including samples from typically clean environments such as supermarkets, could have been beneficial in identifying underlying factors. Additionally, investigating the entire manufacturing process, from production to end-user, could have provided insights into unforeseen deviations in quality. Furthermore, the use of pour plating techniques at 37°C for microbial analysis, while suitable for resource-limited settings, may not have fully captured coliform diversity compared to membrane filtration and differential temperature incubation as per standard methods. This could partly explain the detection of heterotrophs without higher coliform counts in some samples.

This study provides baseline data on the bacteriological and inorganic chemical quality of bottled water in Dodoma. Detectable microbial contaminants and significant exceedances of fluoride guidelines in some products raise public health concerns.

While existing studies focus on bottled water quality at production facilities, this research highlights the overlooked risks at retail points, where consumers are directly affected.

Nanotechnology (NT) advancements in personal protective textiles (PPT) or personal protective equipment (PPE) have alleviated spread and transmission of this highly contagious viral disease, and enabled enhancement of PPE, thereby fortifying antiviral behavior.

Review of a series of state of the art research papers on the subject matter.

This paper expounds on novel nanotechnological advancements in polymeric textile composites, emerging applications and fight against COVID-19 pandemic.

As a panacea to “public droplet prevention,” textiles have proven to be potentially effective as environmental droplet barriers (EDBs).

PPT in form of healthcare materials including surgical face masks (SFMs), gloves, goggles, respirators, gowns, uniforms, scrub-suits and other apparels play critical role in hindering the spreading of COVID-19 and other “oral-respiratory droplet contamination” both within and outside hospitals.

When used as double-layers, textiles display effectiveness as SFMs or surgical-fabrics, which reduces droplet transmission to <10 cm, within circumference of ∼0.3%.

NT advancements in textiles through nanoparticles, and sensor integration within textile materials have enhanced versatile sensory capabilities, robotics, flame retardancy, self-cleaning, electrical conductivity, flexibility and comfort, thereby availing it for health, medical, sporting, advanced engineering, pharmaceuticals, aerospace, military, automobile, food and agricultural applications, and more. Therefore, this paper expounds on recently emerging trends in nanotechnological influence in textiles for engineering and fight against COVID-19 pandemic.

This paper aims to focus on the aqueous extraction of natural dye from haematoxylum campechianum L. bark for finishing the bio-mordant cotton fabrics producing value-added, environment-friendly textile products, for biomedical applications.

The study focuses on the creation of eco-friendly bio-mordant cotton fabric using gallic acid and gelatin, Al³⁺ and Fe²⁺ salts and metal mordant. The optimal pH for extraction, structural characterization and phytochemical analysis of the extracted dye were estimated using UV-visible spectrophotometer, FTIR and qualitative analysis. Variations in electrolyte concentration and pH medium were also considered. The study also examines build-up properties, colorimetric values and fastness characteristics of the colored fabrics.

All the dyed fabrics exhibit very good to excellent in terms of antimicrobial resistance against S. aureus and C. allbicans.

Pre-mordant cotton fabrics with Fe²⁺ and a combination of metal and bio-mordant show higher antibacterial resistance against P. aerugionsa. Further, bio-mordant and a combination of both mordant exhibit excellent UV protection and antioxidant activity performance compared to that of undyed fabrics.

This work opens up a huge potential for producing healthy bioactive-colored fabrics used in medical textiles and other usages.

This study aims to explore the synthesis, characteristics and utilization of polymer composites integrated with cutting-edge pigments.

The incorporation of advanced pigments introduces functionalities such as enhanced mechanical strength, thermal stability, ultraviolet resistance and color stability, thus extending the range of applications in diverse fields including automotive, aerospace, electronics and construction.

This review discusses the mechanisms underlying the property enhancements achieved through the incorporation of advanced pigments and highlights recent developments in the field.

Polymer composites incorporating advanced pigments have garnered significant attention in recent years because of their potential to enhance various material properties and broaden their applications. This paper explores the fabrication methods of polymer composites reinforced with organic/inorganic advanced pigments in brief along with their characteristics and applications.

Sustainable textiles have become imperative in mitigating the adverse environmental and social impacts of the textile industry. This paper aims to synthesize recent advancements and key considerations in sustainable textile development, emphasizing their role in promoting environmental stewardship, social responsibility and economic viability.

The literature search has been conducted by identifying and articulating the previous studies related to integrating the latest cutting-edge techniques with functional textiles.

Future-generation textiles (FGTs), which incorporate state-of-the-art developments in materials, technologies and functionalities, herald a paradigm-shifting period in the textile industry. FGTs mark a new era in this dynamic world by igniting conversations about their mechanisms, problems, progress to date and potential future applications. This investigation covers a wide range of topics, including wearable electronics, nanotechnology, 3D printing, recycling, machine learning and energy harvesting. Key components include sustainability, functionality, intelligent integration, advanced manufacturing processes and multifunctionality. The paper highlights the potential benefits of smart textiles, wearable technology, improved performance and sustainability through advances in customization and security.

It is an original review work. This paper will be helpful for manufacturers and researchers in the smart wearable textile sector in developing innovative techniques for multifunctional garments by integrating cutting-edge technology.