Search results

This study aims to investigate the micro mechanism of macro rheological characteristics for composite modified asphalt.Grey relational analysis (GRA) was used to analyze the correlation between macro rheological indexes and micro infrared spectroscopy indexes.

First, a dynamic shear rheometer and a bending beam rheometer were used to obtain the evaluation indexes of high- and low-temperature rheological characteristics for asphalt (virgin, SBS/styrene butadiene rubber [SBR], SBS/rubber and SBR/rubber) respectively, and its variation rules were analyzed. Subsequently, the infrared spectroscopy test was used to obtain the micro rheological characteristics of asphalt, which were qualitatively and quantitatively analyzed, and its variation rules were analyzed. Finally, with the help of GRA, the macro-micro evaluation indexes were correlated, and the improvement efficiency of composite modifiers on asphalt was explored from rheological characteristics.

It was found that the deformation resistance and aging resistance of SBS/rubber composite modified asphalt are relatively good, and the modification effect of composite modifier and virgin asphalt is realized through physical combination, and the rheological characteristics change with the accumulation of functional groups. The correlation between macro rutting factor and micro functional group index is high, and the relationship between macro Burgers model parameters and micro functional group index is also close.

Results reveal the basic principle of inherent-improved synergistic effect for composite modifiers on asphalt and provide a theoretical basis for improving the composite modified asphalt.

This study aims to investigate the impact of regular Kung Fu and Taekwondo practice on the health and quality of life among elderly individuals in the Maule region, Chile.

The authors designed a 12-week Kung Fu and Taekwondo workshop with activities suitable for their age. Through semistructured interviews (at the beginning and the end of the workshop), along with periodic monitoring of vital signs and cardiovascular components, the authors observed an improvement in participants’ physical (strength, speed of reaction and flexibility) and psychological conditions (self-esteem and resilience), quality of life (relationships with family and friends and ability to deal with stressful events in working life) and health (waist circumference, percentage of oxygen saturation in blood, blood pressure, among other values).

From these results, the authors affirm that this workshop improves health and physical condition and helps the participants develop the coping capacity to deal with stressful situations and complicated interpersonal relationships. In this sense, the authors conclude that Kung Fu and Taekwondo as regular sports activities can benefit senior citizens’ aging process.

This research is based on an original study project.

The purpose of this study was to determine the factors associated with functionality, a clinical criterion that could predict frailty in the elderly people in a rural context.

This project is a cross-sectional descriptive analysis of 342 adults of age >60 years who are residents of Putumayo province in Colombia. Information regarding demographic characteristics, medical history, health perception and current illness was collected. The Mini-Mental State Examination (MMSE) protocol was used to perform cognitive evaluation; the Yesavage Geriatric Depression Scale was used to establish depressive symptoms; and the Hamilton Rating Scale was used to assess anxiety level. Questionnaire was used to evaluate performance on instrumental activities of daily living that lead to functional independence [daily life questionnaire (DLQ)]. The medical outcomes study scale was used to assess social parameters.

A moderate and negative correlation was found between the DLQ score and age (r = −0.49; 95% CI: −0.57 to −0.47), whereas a positive correlation was found with education (r = 0.17; 95% CI: 0.07–0.27). Older adults with economic independence achieved a higher score in functional performance than those with economic dependence (standardized mean difference = 0.55; 95% CI: 0.33–0.77). This study observed a moderate correlation a moderate correlation between the MMSE cognitive performance (r = 0.56; 95% CI: 0.48−0.63) and the depressive symptomatology of Yesavage Scale (r = −0.36, 95% CI: −0.44 to −0.26). Finally, the structural model determined that age (r = −0.37), economic dependence (r = −0.383) and cognitive state (r = 0.309) determine the functional component.

This study provides empirical support about older adults living in rural contexts, around the functionality variable from a multidimensional approach, highlighting the sociodemographic and cognitive variables. Consequently, the policy of social support in older adults must be oriented toward the development of a range of divergent intervention strategies.

The study deals with the assessment of functionality in the elderly people from an interdisciplinary approach in the rural setting which presents a greater risk of physical and socioeconomic vulnerability. Therefore, the community, the health professionals and the government entities should help implement active aging programs for this population.

Fused deposition modeling (FDM) is an extensively used additive manufacturing method with the capacity to build complex functional components. Due to the machinery and environmental factors during manufacturing, the FDM parts inevitably demonstrated uncertainty in properties and performance. This study aims to identify the stochastic constitutive behaviors of FDM-fabricated polylactic acid (PLA) tensile specimens induced by the manufacturing process.

By conducting the tensile test, the effects of the printing machine selection and three major manufacturing parameters (i.e., printing speed S, nozzle temperature T and layer thickness t) on the stochastic constitutive behaviors were investigated. The influence of the loading rate was also explained. In addition, the data-driven models were established to quantify and optimize the uncertain mechanical behaviors of FDM-based tensile specimens under various printing parameters.

As indicated by the results, the uncertain behaviors of the stiffness and strength of the PLA tensile specimens were dominated by the printing speed and nozzle temperature, respectively. The manufacturing-induced stochastic constitutive behaviors could be accurately captured by the developed data-driven model with the R² over 0.98 on the testing dataset. The optimal parameters obtained from the data-driven framework were T = 231.3595 °C, S = 40.3179 mm/min and t = 0.2343 mm, which were in good agreement with the experiments.

The developed data-driven models can also be integrated into the design and characterization of parts fabricated by extrusion and other additive manufacturing technologies.

Stochastic behaviors of additively manufactured products were revealed by considering extensive manufacturing factors. The data-driven models were proposed to facilitate the description and optimization of the FDM products and control their quality.

Performing accurate numerical simulations of electrical drives, the precise knowledge of the local magnetic material properties is of utmost importance. Due to the various manufacturing steps, e.g. heat treatment or cutting techniques, the magnetic material properties can strongly vary locally, and the assumption of homogenized global material parameters is no longer feasible. This paper aims to present the general methodology and two different solution strategies for determining the local magnetic material properties using reference and simulation data.

The general methodology combines methods based on measurement, numerical simulation and solving an inverse problem. Therefore, a sensor-actuator system is used to characterize electrical steel sheets locally. Based on the measurement data and results from the finite element simulation, the inverse problem is solved with two different solution strategies. The first one is a quasi Newton method (QNM) using Broyden's update formula to approximate the Jacobian and the second is an adjoint method. For comparison of both methods regarding convergence and efficiency, an artificial example with a linear material model is considered.

The QNM and the adjoint method show similar convergence behavior for two different cutting-edge effects. Furthermore, considering a priori information improved the convergence rate. However, no impact on the stability and the remaining error is observed.

The presented methodology enables a fast and simple determination of the local magnetic material properties of electrical steel sheets without the need for a large number of samples or special preparation procedures.

This paper aims to identify how a public client’s use of control systems (process, output and social control) affect innovation possibilities in construction projects.

Semi-structured interviews about six infrastructure projects were conducted to identify respondents’ views on innovation possibilities. These possibilities were then analyzed from an organizational control perspective within principal–agent relationships between the Swedish Transport Administration (STA) and their contractors.

How the client uses control systems affects innovation possibilities. Relying on process control could negatively affect innovation opportunities, whereas output control could have a positive influence. In addition, social control seems to have a weak effect, as the STA appears not to use social control to facilitate joint innovation. Public clients must comply with the Public Procurement Act and, therefore, retain the requirements specified in the tendering documents. Much of the steering of the execution is connected to the ex ante phase (before signing the contract), which affects innovation possibilities in the design and execution phases for the contractor.

This study was conducted with only one client, thus limiting its generalizability. However, the findings provide an important stepping stone to further investigation into balancing control systems and creating innovation possibilities in a principal–agent relationship.

Although public procurement has increasingly been emphasized as a major potential source of innovation, studying how a public client’s use of organizational control systems affects innovation possibilities in the construction sector has received scant attention.

This paper explores how the manufacturer’s strategic choice (acquisition or investment) impacts product quality in a supply chain comprising two complementary suppliers and a common manufacturer.

The manufacturer faces six strategic choices to improve product quality: acquiring or investing in the high-capable supplier, the low-capable supplier, or both. As the Stackelberg leader, the manufacturer determines which strategy is adopted, while suppliers are separately responsible for components’ quality and wholesale prices. The authors use game theory and calculate the model with Mathematica.

The authors develop analytical models to analyze how acquisition costs, investment proportions, component importance and quality improvement coefficients influence decision-makers. The results show that the highest quality may not benefit the manufacturer. Investing in or acquiring a low-capable supplier is better than a high-capable supplier under certain conditions. If the gaps between two suppliers’ quality improvement coefficients and the importance of two components are dramatic, the manufacturer should choose an investment strategy.

This study contributes to the complementary supply chain management by comparing two kinds of strategies-acquisition and investment, with a high-capable supplier and a low-capable supplier.

Purpose: The importance of creativity and innovation can’t be overstressed today. Especially in the context of volatility, uncertainty, complexity, and ambiguity (VUCA) world, firms cutting across businesses have to pay special attention to building a culture of creativity and innovation around business processes.

Design/Methodology/Approach: The study uses an extant literature review and practical cases to highlight the parameters required to build a culture of creativity and innovation in companies. These parameters lead to the development of the conceptual framework that can help firms sustain innovation even amidst a fast-changing business environment.

Findings: The findings suggest that focus on internal and external forces is required to keep up innovation efforts in the VUCA world. Being agile with a discrete focus on learning is essential to remain creative and innovative for business sustainability.

Research Limitations/Implications: The study is crucial for academicians, practitioners, and policy makers. It is expected to open new avenues of research for further contributing to the body of knowledge related to the field of creativity and innovation while expected to help society by bringing them more innovative products at pocket-friendly prices.

Originality/Value: The study is unique as it delineates the relationship between creativity and innovation in the context of the VUCA world. The research also offers an innovation framework that is a valuable addition to both fields of academia and corporate.

With the increasing number of Web services, correct and efficient classification of Web services is crucial to improve the efficiency of service discovery. However, existing Web service classification approaches ignore the class overlap in Web services, resulting in poor accuracy of classification in practice. This paper aims to provide an approach to address this issue.

This paper proposes a label confusion and priori correction-based Web service classification approach. First, functional semantic representations of Web services descriptions are obtained based on BERT. Then, the ability of the model is enhanced to recognize and classify overlapping instances by using label confusion learning techniques; Finally, the predictive results are corrected based on the label prior distribution to further improve service classification effectiveness.

Experiments based on the ProgrammableWeb data set show that the proposed model demonstrates 4.3%, 3.2% and 1% improvement in Macro-F1 value compared to the ServeNet-BERT, BERT-DPCNN and CARL-NET, respectively.

This paper proposes a Web service classification approach for the overlapping categories of Web services and improve the accuracy of Web services classification.