Search results

In order to develop high-strength, high-toughness and high-wear-resistance rails suitable for the development and application of heavy-haul railways.

Based on the trial production of 60 kg·m⁻¹ bainite rails, the Zeiss inverted optical microscope, transmission electron microscope and static hydraulic universal tester were used to test the microstructure and property of rail base metal and welded joints. Meanwhile, a trial laying of rails, wing rails of frogs and switch rails for turnouts was performed to systematically analyze their strength, toughness and wear resistance.

The results show that the base metal of 60 kg·m⁻¹ bainite rail is of a uniform microstructure, with a carbide-free bainite matrix, a few of stable residual austenite and M/A islands, and it features high hardness, good wear resistance and good strength-toughness balance. The welded joint is of a uniform microstructure and has good properties.

A bainite rail, laid in a curve section of heavy-haul railway is able to serve for 48 months with a gross traffic tonnage of nearly 600 million tons, whose service life is more than one time longer than that of pearlite rail; the service life of the wing rail of frog and the switch rail for turnout with 60 kg·m⁻¹ bainite rails is 3–4 times longer than that with U75V rails, and no serious damage occurs. The bainite rails also have strong peeling and spalling resistance.

The purpose of this study is the introduction and validation of a new technique for process monitoring during electron beam melting (EBM).

In this study, a backscatter electron detector inside the building chamber is used for image acquisition during EBM process. By systematic variation of process parameters, the ability of displaying different topographies, especially pores, is investigated. The results are evaluated in terms of porosity and compared with optical microscopy and X-ray computed tomography.

The method is capable of detecting major flaws (e.g. pores) and gives information about the quality of the resulting component.

Image acquisition by evaluating backscatter electrons during EBM process is a new approach in process monitoring which avoids disadvantages restricting previously investigated techniques.

The purpose of this paper is to summarize the status and characteristics of rail technology of high-speed railway in China, and point out the development direction of rail technology of high-speed railway.

This study reviews the evolution of high-speed rail standards in China, comparing their chemical composition, mechanical attributes and geometric specifications with EN standards. It delves into the status of rail production technology, shifts in key performance indicators and the quality characteristics of rails. The analysis further examines the interplay between wheels and rails, the implementation of grinding technology and the techniques for inspecting rail service conditions. It encapsulates the salient features of rail operation and maintenance within the high-speed railway ecosystem. The paper concludes with an insightful prognosis of high-speed railway technology development in China.

The rail standards of high-speed railway in China are scientific and advanced, highly operational and in line with international standards. The quality and performance of rail in China have reached the world’s advanced level. The 60N profile guarantees the operation quality of wheel–rail interaction effectively. The rail grinding technology system scientifically guarantees the long-term good service performance of the rail. The rail service state detection technology is scientific and efficient. The rail technology will take “more intelligent” and “higher speed” as the development direction to meet the future needs of high-speed railway in China.

The development direction of rail technology for high-speed railway in China is defined, which will promote the continuous innovation and breakthrough of rail technology.

Effective rail surface defects detection method is the basic guarantee to manufacture high-quality rail. However, the existed visual inspection methods have disadvantages such as poor ability to locate the rail surface region and high sensitivity to uneven reflection. This study aims to propose a bionic rail surface defect detection method to obtain the high detection accuracy of rail surface defects under uneven reflection environments.

Through this bionic rail surface defect detection algorithm, the positioning and correction of the rail surface region can be computed from maximum run-length smearing (MRLS) and background difference. A saliency image can be generated to simulate the human visual system through some features including local grayscale, local contrast and edge corner effect. Finally, the meanshift algorithm and adaptive threshold are developed to cluster and segment the saliency image.

On the constructed rail defect data set, the bionic rail surface defect detection algorithm shows good recognition ability on the surface defects of the rail. Pixel- and defect-level index in the experimental results demonstrate that the detection algorithm is better than three advanced rail defect detection algorithms and five saliency models.

The bionic rail surface defect detection algorithm in the production process is proposed. Particularly, a method based on MRLS is introduced to extract the rail surface region and a multifeature saliency fusion model is presented to identify rail surface defects.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

This paper aims to discuss the development of a defect classification system that can be used to detect and classify powder bed surface defects from captured layer images without the need for specialised computational hardware. The idea is to develop this system by making use of more traditional machine learning (ML) models instead of using computationally intensive deep learning (DL) models.

The approach that is used by this study is to use traditional image processing and classification techniques that can be applied to captured layer images to detect and classify defects without the need for DL algorithms.

The study proved that a defect classification algorithm could be developed by making use of traditional ML models with a high degree of accuracy and the images could be processed at higher speeds than typically reported in literature when making use of DL models.

This paper addresses a need that has been identified for a high-speed defect classification algorithm that can detect and classify defects without the need for specialised hardware that is typically used when making use of DL technologies. This is because when developing closed-loop feedback systems for these additive manufacturing machines, it is important to detect and classify defects without inducing additional delays to the control system.

This study aims to solve the problem of weld quality inspection, for the aluminum alloy profile welding structure of high-speed train body has complex internal shape and thin plate thickness (2–4 mm), the conventional nondestructive testing method of weld quality is difficult to implement.

In order to solve this problem, the ultrasonic creeping wave detection technology was proposed. The impact of the profile structure on the creeping wave detection was studied by designing profile structural test blocks and artificial simulation defect test blocks. The detection technology was used to test the actual welded test blocks, and compared with the results of X-ray test and destructive test (tensile test) to verify the accuracy of the ultrasonic creeping wave test results.

It is indicated that that X-ray has better effect on the inspection of porosities and incomplete penetration defects. However, due to special detection method and protection, the detection speed is slow, which cannot meet the requirements of field inspection of the welding structure of aluminum alloy thin-walled profile for high-speed train body. It can be used as an auxiliary detection method for a small number of sampling inspection. The ultrasonic creeping wave can be used to detect the incomplete penetration welds with the equivalent of 0.25 mm or more, the results of creeping wave detection correspond well with the actual incomplete penetration defects.

The results show that creeping wave detection results correspond well with the actual non-penetration defects and can be used for welding quality inspection of aluminum alloy thin-wall profile composite welding joints. It is recommended to use the echo amplitude of the 10 mm × 0.2 mm × 0.5 mm notch as the criterion for weld qualification.

Detection of hidden defects of aluminum alloy plate with damping coating is a challenging problem. At present, only a few non-destructive testing methods exist to address this engineering problem. Without the restriction of skin effect, remote field eddy current (RFEC) overcomes the interference caused by the damping coating. The RFEC, which has potential advantages for detecting the hidden defects of aluminum plate with damping coating, can penetrate the metal plate to detect buried depth defects. This study aims to test how thick the RFEC sensor can penetrate the metal plate to detect the buried defects.

The magnetic field distribution characteristics are analyzed, the magnetic field intensity distribution is calculated, and the structure and parameters of the coil, magnetic circuit and shielding damping are determined through the two- and three-dimensional finite element simulation methods. Optimal excitation frequency is obtained, and the distance between the excitation coil and detection coil is determined by analyzing the relationship between excitation frequency and remote field points.

Simulation and experimental results verify the feasibility of applying the RFEC detection technology in detecting the hidden defects of aluminum alloy plate with damping coating.

In this paper, the RFEC testing model of hidden defects in aluminum plate sample with damping coating is established by using the finite element method.

This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.

Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).

Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.

Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.

The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.

By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.

Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.

Given how smart today’s malware authors have become through employing highly sophisticated techniques, it is only logical that methods be developed to combat the most potent threats, particularly where the malware is stealthy and makes indicators of compromise (IOC) difficult to detect. After the analysis is completed, the output can be employed to detect and then counteract the attack. The goal of this work is to propose a machine learning approach to improve malware detection by combining the strengths of both supervised and unsupervised machine learning techniques. This study is essential as malware has certainly become ubiquitous as cyber-criminals use it to attack systems in cyberspace. Malware analysis is required to reveal hidden IOC, to comprehend the attacker’s goal and the severity of the damage and to find vulnerabilities within the system.

This research proposes a hybrid approach for dynamic and static malware analysis that combines unsupervised and supervised machine learning algorithms and goes on to show how Malware exploiting steganography can be exposed.

The tactics used by malware developers to circumvent detection are becoming more advanced with steganography becoming a popular technique applied in obfuscation to evade mechanisms for detection. Malware analysis continues to call for continuous improvement of existing techniques. State-of-the-art approaches applying machine learning have become increasingly popular with highly promising results.

Cyber security researchers globally are grappling with devising innovative strategies to identify and defend against the threat of extremely sophisticated malware attacks on key infrastructure containing sensitive data. The process of detecting the presence of malware requires expertise in malware analysis. Applying intelligent methods to this process can aid practitioners in identifying malware’s behaviour and features. This is especially expedient where the malware is stealthy, hiding IOC.