Search results

There is a developing interest in flexible sensors, especially in the new and intelligent generation of textiles. The purpose of this paper is to fabricate a flexible capacitive sensor on a PET fabric and to investigate some affecting factor on its performance.

PET fabric, coated with graphite or with graphite/PEDOT:PSS, was applied as electrodes. Two types of electrospun nanoweb layers from polyamide and polyvinyl alcohol polymers were used as dielectrics. Some factors including electrode area, fabric conductivity, fabric roughness, dielectric thickness, dielectric insulation type and vertical pressure were considered as independent variables. The capacity of the sensor and its detection threshold considered as the outcome (response) variables. Control samples were fabricated by using aluminum plates and cellulosic layer as electrodes and dielectric, respectively.

Results showed that post-coating with PEDOT:PSS would improve the conductivity of electrodes up to 300 Ω in comparison with just graphite-coated samples. It was also found that either by improving the conductivity or increasing the area of electrode plates the sensitivity of sample would be increased in pressure stimulating tests.

The fabric sensor showed remarkable response toward pressure with a lower detection threshold of 30mN/cm² (obtained capacity ~ 4×104 pF) in comparison with aluminum electrode sensors.

This paper seeks to pursue the research of different types of sensors suitable for positioning edge accuracy of textile material.

A measuring device is used to install different types of sensors on the slide holders and to change their interspace as well as the space between the sensors and textile fabric.

The new measuring equipment has been established.

Only the results of woven fabric measurement are analyzed in this paper, while the results of knitted and nonwoven fabric measurement will be elaborated in the future papers.

The measuring equipment is original.

The aim of this paper is to introduce and to evaluate the performance of a multiple frequency complex impedance reconstruction for fabric-based EIT pressure sensor. Pressure mapping is an important and challenging area of modern sensing technology. It has many applications in areas such as artificial skins in Robotics and pressure monitoring on soft tissue in biomechanics. Fabric-based sensors are being developed in conjunction with electrical impedance tomography (EIT) for pressure mapping imaging. This is potentially a very cost-effective pressure mapping imaging solution in particular for imaging large areas. Fabric-based EIT pressure sensors aim to provide a pressure mapping image using current carrying and voltage sensing electrodes attached on the boundary of the fabric patch.

Recently, promising results are being achieved in conductivity imaging for these sensors. However, the fabric structure presents capacitive behaviour that could also be exploited for pressure mapping imaging. Complex impedance reconstructions with multiple frequencies are implemented to observe both conductivity and permittivity changes due to the pressure applied to the fabric sensor.

Experimental studies on detecting changes of complex impedance on fabric-based sensor are performed. First, electrical impedance spectroscopy on a fabric-based sensor is performed. Secondly, the complex impedance tomography is carried out on fabric and compared with traditional EIT tank phantoms. Quantitative image quality measures are used to evaluate the performance of a fabric-based sensor at various frequencies and against the tank phantom.

The paper demonstrates for the first time the useful information on pressure mapping imaging from the permittivity component of fabric EIT. Multiple frequency EIT reconstruction reveals spectral behaviour of the fabric-based EIT, which opens up new opportunities in exploration of these sensors.

Examines the fifteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this research is to propose a flexible sensor with a weft-knitted float stitch structure and to explore knitting techniques that allow conductive yarns to be skin-tight and less exposed, reducing production processes and increasing productivity. Study its electrical conductivity in different yarn materials, knit processes and deformation ranges. The analysis is compared to provide some basis for the design of the electrodes.

The method includes five operations: (1) Analysis of the morphological appearance, tensile variation, fiber material properties and electrical conductivity of high-elastic and filament silver-plated conductive yarns. (2) Based on the knitting process of the floating yarn structure, three-dimensional modeling of the flexible sensor was carried out to explore the influence of knitting process changes on appearance characteristics. (3) The fabric samples are knitted by different silver-plated conductive yarns with different structures. Processing of experimental samples to finished size by advance shrinkage. (4) Measure the resistance of the experimental sample after the machine has been lowered and after pre-shrinking. Use the stretching machine to simulate a wearing experiment and measure the change in resistance of the sample in the 0–15% stretching range. (5) Analyze the influence factors on the conductive performance of the flexible sensor to determine whether it is suitable for textile flexible sensors.

For the float knitted flexible sensors, the floating wire projection is influenced by the elasticity of the fabric and the length of the floating wire. Compared to the plain knitted flexible sensors, it has less resistance variation and better electrical properties, making it suitable for making electrodes for textile structures. In addition, the knitting method is integrated with the intelligent monitoring clothing, which saves the process for the integration of the flexible sensor, realizes positioning and fixed-point knitting.

The sensor technology of the designed weft-knitted float structure is varied and can be freely combined and designed in a wide range. Within the good electrical conductivity, the flexible sensor can realize integrated knitting, positioning monitoring, integrating into the appearance of clothing. It can also focus on the wearing experience of wearable products so that the appearance of the monitoring clothing is close to the clothes we wear in our daily life.

In this paper, an integrated positioning knitting flexible sensor based on the weft knitting float structure is studied. The improved knitting process allows the sensing contact surface to be close to the skin and reduces the integration process. The relationship between the exposure of the silver-plated yarn on the clothing surface and the electrical conductivity is analyzed. Within a certain conductive performance, reduces the exposed area of the conductive yarn on the clothing surface and proposes a design reference for the flexible sensor appearance.

The paper aims to develop a novel method for the classification of different physical activities of a human being, using fabric sensors. This method focuses mainly on classifying the physical activity between normal action and violent attack on a victim and verifies its validity.

The system is realized as a protective jacket that can be worn by the subject. Stretch sensors, pressure sensors and a 9 degree of freedom accelerometer are strategically woven on the jacket. The jacket has an internal bus system made of conductive fabric that connects the sensors to the Flora chip, which acts as the data acquisition unit for the data generated. Different activities such as still, standing up, walking, twist-jump-turn, dancing and violent action are performed. The jacket in this study is worn by a healthy subject. The main phases which describe the activity recognition method undertaken in this study are the placement of sensors, pre-processing of data and deploying machine learning models for classification.

The effectiveness of the method was validated in a controlled environment. Certain challenges are also faced in building the experimental setup for the collection of data from the hardware. The most tedious challenge is to collect the data without noise and error, created by voltage fluctuations when stretched. The results show that the support vector machine classifier can classify different activities and is able to differentiate normal action and violent attacks with an accuracy of 98.8%, which is superior to other methods and algorithms.

This study leads to an understanding of human physical movement under violent activity. The results show that data compared with normal physical motion, which includes even a form of dance is quite different from the data collected during violent physical motion. This jacket construction with woven sensors can capture every dimension of the physical motion adding features to the data on which the machine learning model will be built.

Unlike other studies, where sensors are placed on isolated parts of the body, in this study, the fabric sensors are woven into the fabric itself to collect the data and to achieve maximum accuracy instead of using isolated wearable sensors. This method, together with a fabric pressure and stretch sensors, can provide key data and accurate feedback information when the victim is being attacked or is in a normal state of action.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the seventeenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.