Search results

Because of the global increase of climate change effects, floods are becoming more frequent and severer, especially in urban areas of coastal cities and islands where floodplains have turned into buildings because of rapid urbanisation, leading to a higher risk of damages. Urban heritage areas should be highly considered in the time of evacuation because of the vulnerability of streets and buildings and limitations on taking counteractions. Given these limitations, this study aims to propose a network of potential evacuation routes based on spatial configuration analysis of the heritage areas.

Penang Island's heritage site, namely, George Town, located on the northwest coast of Malaysia, is chosen as the case study. By using an approach of spatial configuration analysis using space syntax techniques in addition to considering the potential starting points for evacuation and flood risk map of the area, this study analysed the area's street network values for evacuation function during flood crisis time.

Potential evacuation routes were identified for flood disasters in the George Town heritage area. Furthermore, the proposed evacuation routes were evaluated in terms of time for evacuation by metric step-depth analysis of space syntax.

A few studies have focused on practical guidelines for evacuation routes based on spatial configuration analysis, an important yet neglected approach in this regard, especially concerning urban island areas. This study can contribute to providing strategies to reduce vulnerability and casualties in urban heritage areas.

This study aims to develop an extended social attachment model for expatriates, integrating a multiple stakeholder perspective, to understand evacuation decisions during disasters.

Through interviews with 12 Tokyo-based expatriates who experienced the 2011 Tohoku earthquake, tsunami and nuclear disasters, this study collects the lived experiences of a diverse set of expatriates. This data is analyzed abductively to map relevant evacuation factors and to propose a reaction typology.

While the 2011 Tohoku disasters caused regional destruction and fears of nuclear fallout, Tokyo remained largely unscathed. Still, many expatriates based in Tokyo chose to leave the country. Evacuation decisions were shaped by an interplay of threat assessment, location of attachment figures and cross-cultural adjustment. The study also discusses the influence of expatriate types.

Disaster planning is often overlooked or designed primarily with host country nationals in mind. Expatriates often lack the disaster experience and readiness of host country nationals in disaster-prone regions in Asia and beyond, and thus might need special attention when disaster strikes. This study provides advice for how to do so.

By unpacking the under-researched and complex phenomenon of expatriate reactions to disasters, this study contributes to the fields of international human resource and disaster management. Specifically, seven proposition on casual links leading to expatriate evacuation are suggested, paving the way for future research.

After completion of the case study, the students would be able to identify and evaluate organizational culture as a critical element of organizational resilience and assess its fit to the business context, evaluate different elements of organizational resilience and their contribution to business adaptation and develop leadership approaches that help adapt and leverage organizational culture to foster individual, team and organizational resilience.

This teaching case covers topics of organizational leadership, including organizational culture and organizational resilience. This case study is appropriate for the postgraduate and executive education programmes. This case study covers the approach to organizational leadership and resilience of the OKKO, a Ukrainian retail petrol station network. The dilemmas considered by top managers of the company emerged in February–April 2022 amid the unfolding Russian invasion of Ukraine. The case study protagonists solved multiple business and organizational dilemmas to continue efficient business operations while allowing the organization to adapt to a complex and fast-changing environment. They leveraged a distinct corporate culture, strong employee engagement and established business processes and management practices to ensure the viability of the business.

This case study is appropriate for postgraduate and executive education programmes. The level of difficulty is light to medium. Recommended pre-requisites are understanding human resources management terminology and reviewing preparation materials. The case study is suitable for teaching courses in leadership, people management and organizational development that cover corporate culture, leadership and organizational resilience.

CSS 6: Human resource management

Teaching notes are available for educators only.

Modern subway transportation systems need to satisfy increasing safety demands to rapidly evacuate passengers under hazardous emergency circumstances, such as fires, accidents or terrorist attacks, to reduce passenger injuries or life losses. The emergency evacuation capacity (EEC) of a subway station needs to be revised timely, in case passenger demand increases or the evacuation route changes in the future. However, traditional ways of estimating EEC, e.g. fire drills are time- and resource-consuming and are difficult to revise from time to time. The purpose of this study is to establish an intuitive modelling approach to increase the EEC of subway stations in a stepwised manner.

This study develops an approach to combine agent-based evacuation modelling and building information modelling (BIM) technology to estimate the total evacuation time of a subway station.

Evacuation time can be saved (33% in the studied case) from iterative improvements including stopping escalators running against the evacuation flow and modifying the geometry around escalator exits. Such iterative improvements rely on integrating agent-based modelling and BIM.

The agent-based model can provide a more realistic simulation of intelligent individual movements under emergency circumstances and provides precise feedback on locations of evacuation bottlenecks. This study also examined the effectiveness of two rounds of stepwise improvements in terms of operation or design to increase the EEC of the station.

In recent years, terrorist attacks have gradually become one of the important factors endangering social security. In this context, this research aims to propose methods and principles which can be utilized to make effective evacuation plans to reduce casualties in terrorist attacks.

By analyzing the statistical data of terrorist attack videos, this paper proposes an extended cellular automaton (CA) model and simulates the panic evacuation of the pedestrians in the terrorist attack.

The main findings are as follows. (1) The panic movement of pedestrians leads to the dispersal of the crowd and the increase in evacuation time. (2) Most deaths occur in the early stage of crowd evacuation while pedestrians gather without perceiving the risk. (3) There is a trade-off between escaping from the room and avoidance of attackers for pedestrians. Appropriate panic contagion enables pedestrians to respond more quickly to risks. (4) Casualties are mainly concentrated in complex terrains, e.g. walls, corners, obstacles, exits, etc. (5) The initial position of the attackers has a significant effect on the crowd evacuation. The evacuation efficiency should be reduced if the attacker starts the attack from the exit or corners.

In this research, the concept of “focus region” is proposed to depict the different reactions of pedestrians to danger and the effects of the attacker’s motion (especially the attack strategies of attackers) are classified. Additionally, the influences on pedestrians by direct and indirect panic sources are studied.

This study aims to predict the consequences associated with the propagation of the flood wave that may occur after the failure of the Taksebt dam and suggest an efficient emergency action plan for mitigation purposes.

To achieve the objectives of this study, the hydrodynamic model HEC-RAS 2D was used for the flood routing of the dam-break wave, which gave an estimate of the hydraulic characteristics downstream the Taksebt dam.

Geospatial analysis of the simulation results conducted in a geographic information system (GIS) environment showed that many residential areas are considered to be in danger in case of the Taksebt dam-break event. Based on the obtained results, an emergency actions plan was suggested to moderate the causalities in the downstream area at risk.

Overall, this study showed that the integration of 2D hydraulic modeling and GIS provides great capabilities in providing realistic view of the dam-break wave propagation that enhances assessing the associated risks and proposing appropriate mitigation measures.

Due to the unknown location, size and timing of disasters, the rapid response required by humanitarian operations (HO) faces high uncertainty and limited time to raise funds. These harsh realities make HO challenging. This study aims to systematically capture the complex dynamic relationships between operations in humanitarian settings.

To achieve this goal, the authors undertook a systematic review of the extant academic literature linking HO to system dynamics (SD) simulation.

The research reviews 88 papers to propose a taxonomy of different topics covered in the literature; a framework represented through a causal loop diagram (CLD) to summarise the taxonomy, offering a view of operational activities and their linkages before and after disasters; and a research agenda for future research avenues.

As the authors provide an adequate representation of reality, the findings can help decision makers understand the problems faced in HO and make more effective decisions.

While other reviews on the application of SD in HO have focused on specific subjects, the current research presents a broad view, summarising the main results of a comprehensive CLD.

Community centers play a socio-economic and urban role of combining different communal necessities, that serve inhabitants, at different neighborhoods in cities. Their role emerged in importance as being a hub for improving and customizing quality of life experiences of the public. This research presents a code-based risk assessment tool for evaluating fire safety measures that can be adapted in the context of community centers. It also provides an exemplary case study to demonstrate its application.

The study identified the factors that render community centers as a high-risk type of facilities in fire events. Various fire codes and standards were reviewed to describe the relevant fire safety measures. A code-based fire risk assessment tool was developed and implemented, through a case study. A set of recommendations were developed to improve the fire safety conditions of the case study facility.

Several violations to fire safety were identified in the case study building. The findings led to identifying a set of recommendations to improve its fire safety conditions.

This research introduced a systematic approach to raise awareness about fire incidences and consequences in community centers, and provides facilities managers with a tool, to assess compliance based on international fire code requirements.

In fire events, community centers are considered as high-risk facilities that may lead to significant losses of human lives and damages to assets. It is significant to study the causes of fire, for ensuring effective prevention and safe operations.

Prefabricated building has been widely applied in the construction industry all over the world, which can significantly reduce labor consumption and improve construction efficiency compared with conventional approaches. During the construction of prefabricated buildings, the overall efficiency largely depends on the lifting sequence and path of each prefabricated component. To improve the efficiency and safety of the lifting process, this study proposes a framework for automatically optimizing the lifting path of prefabricated building components using building information modeling (BIM), improved 3D-A* and a physic-informed genetic algorithm (GA).

Firstly, the industry foundation class (IFC) schema for prefabricated buildings is established to enrich the semantic information of BIM. After extracting corresponding component attributes from BIM, the models of typical prefabricated components and their slings are simplified. Further, the slings and elements’ rotations are considered to build a safety bounding box. Secondly, an efficient 3D-A* is proposed for element path planning by integrating both safety factors and variable step size. Finally, an efficient GA is designed to obtain the optimal lifting sequence that satisfies physical constraints.

The proposed optimization framework is validated in a physics engine with a pilot project, which enables better understanding. The results show that the framework can intuitively and automatically generate the optimal lifting path for each type of prefabricated building component. Compared with traditional algorithms, the improved path planning algorithm significantly reduces the number of nodes computed by 91.48%, resulting in a notable decrease in search time by 75.68%.

In this study, a prefabricated component path planning framework based on the improved A* algorithm and GA is proposed for the first time. In addition, this study proposes a safety-bounding box that considers the effects of torsion and slinging of components during lifting. The semantic information of IFC for component lifting is enriched by taking into account lifting data such as binding positions, lifting methods, lifting angles and lifting offsets.