Search results

This article aims to optimise energy use and consumption by integrating Lean Six Sigma methodology with the ISO 50001 energy management system standard in an Irish dairy plant operation.

This work utilised Lean Six Sigma methodology to identify methods to measure and optimise energy consumption. The authors use a single descriptive case study in an Irish dairy as the methodology to explain how DMAIC was applied to reduce energy consumption.

The replacement of heavy oil with liquid natural gas in combination with the new design of steam boilers led to a CO₂ footprint reduction of almost 50%.

A further longitudinal study would be useful to measure and monitor the energy management system progress and carry out more case studies on LSS integration with energy management systems across the dairy industry.

The novelty of this study is the application of LSS in the dairy sector as an enabler of a greater energy-efficient facility, as well as the testing of the DMAIC approach to meet a key objective for ISO 50001 accreditation.

In recent years, increased awareness on global warming effects led to a renewed interest in all kinds of green technologies. Among them, some attention has been devoted to hybrid-electric aircraft – aircraft where the propulsion system contains power systems driven by electricity and power systems driven by hydrocarbon-based fuel. Examples of these systems include electric motors and gas turbines, respectively. Despite the fact that several research groups have tried to design such aircraft, in a way, it can actually save fuel with respect to conventional designs, the results hardly approach the required fuel savings to justify a new design. One possible path to improve these designs is to optimize the onboard energy management, in other words, when to use fuel and when to use stored electricity during a mission. The purpose of this paper is to address the topic of energy management applied to hybrid-electric aircraft, including its relevance for the conceptual design of aircraft and present a practical example of optimal energy management.

To address this problem the dynamic programming (DP) method for optimal control problems was used and, together with an aircraft performance model, an optimal energy management was obtained for a given aircraft flying a given trajectory.

The results show how the energy onboard a hybrid fuel-battery aircraft can be optimally managed during the mission. The optimal results were compared with non-optimal result, and small differences were found. A large sensitivity of the results to the battery charging efficiency was also found.

The novelty of this work comes from the application of DP for energy management to a variable weight system which includes energy recovery via a propeller.

Under the dual pressure of resources and environment, many countries have focused on the role of railways in promoting low-carbon development of integrated transportation and of even the whole society. This paper aims to provide a comprehensive study on methods to improve railway energy efficiency in other national railways and achievements made by China’s railways in the past practice, and then to propose ways in which in the future China’s railways could rationally select the path of improving energy efficiency regarding the needs of the nation's ever-shifting development and carry out the re-engineering for mechanism innovation in energy conservation and emission reduction process.

This paper first studies other national railways that have tried to promote the improvement of railway energy efficiency by the ways of technology, management and structural reconstruction to reduce energy consumption and carbon emissions. Among them, the effect of structural energy conservation and emission reduction has become more prominent. It has become the main energy conservation and emission reduction measure adopted by foreign railway sectors. The practice of energy conservation and emission reduction of railways in various countries has tended to shift from a technical level to a structural one.

Key aspects in improving energy efficiency include re-optimization of energy structure, re-innovation of energy-saving technologies and optimization of transportation organization. Path selection includes continuing to promote electrified railway construction, increasing the use of new and renewable energy sources, and promoting the reform of railway transportation organizations.

This paper provides further challenges and research directions in the proposed area and has referential value for the methodologies, approaches for practice in a Chinese context. To achieve the expected goals, relevant supporting policies and measures need to be formulated, including actively guiding integrated transportation toward railway-oriented development, promoting innovation in energy-saving and emission reduction mechanisms and strengthening policy incentives, focusing on improving the energy efficiency of railways through market behavior. At the same time, it is necessary to pay attention to new phenomena in the railway industry for track and analysis.

A standalone microgrid (MG) is able to use local renewable resources and reduce the loss in long distance transmission. But the single-phase device in a standalone MG can cause the voltage unbalance condition and additional power loss that reduces the cycle life of battery. This paper proposes an energy management strategy for the battery/supercapacitor (SC) hybrid energy storage system (HESS) to improve the transient performance of bus voltage under unbalanced load condition in a standalone AC microgrid (MG).

The SC has high power density and much more cycling times than battery and thus to be controlled to absorb the transient and unbalanced active power as well as the reactive power under unbalanced condition. Under the proposed energy management design, the battery only needs to generate balanced power to balance the steady state power demand. The energy management strategy for battery/SC HESS in a standalone AC MG is validated in simulation study using PSCAD/EMTDC.

The results show that the energy management strategy of HESS maintains the bus voltage and eliminates the unbalance condition under single-phase load. In addition, with the SC to absorb the reactive power and unbalanced active power, the unnecessary power loss in battery is reduced with shown less accumulate depth of discharge and higher average efficiency.

With this technology, the service life of the HESS can be extended and the total cost can be reduced.

This paper aims to forecast the availability of used but operational electric vehicle (EV) batteries to integrate them into a circular economy concept of EVs' end-of-life (EOL) phase. Since EVs currently on the roads will become obsolete after 2030, this study focuses on the 2030–2040 period and links future renewable electricity production with the potential for storing it into used EVs' batteries. Even though battery capacity decreases by 80% or less, these batteries will remain operational and can still be seen as a valuable solution for storing peaks of renewable energy production beyond EV EOL.

Storing renewable electricity is gaining as much attention as increasing its production and share. However, storing it in new batteries can be expensive as well as material and energy-intensive; therefore, existing capacities should be considered. The use of battery electric vehicles (BEVs) is among the most exciting concepts on how to achieve it. Since reduced battery capacity decreases car manufacturers' interest in battery reuse and recycling is environmentally hazardous, these batteries should be integrated into the future electricity storage system. Extending the life cycle of batteries from EVs beyond the EV's life cycle is identified as a potential solution for both BEVEOL and electricity storage.

Results revealed a rise of photovoltaic (PV) solar power plants and an increasing number of EVs EOL that will have to be considered. It was forecasted that 6.27–7.22% of electricity from PV systems in scenario A (if EV lifetime is predicted to be 20 years) and 18.82–21.68% of electricity from PV systems in scenario B (if EV lifetime is predicted to be 20 years) could be stored in batteries. Storing electricity in EV batteries beyond EV EOL would significantly decrease the need for raw materials, increase energy system and EV sustainability performance simultaneously and enable leaner and more efficient electricity production and distribution network.

Storing electricity in used batteries would significantly decrease the need for primary materials as well as optimizing lean and efficient electricity production network.

Energy storage is one of the priorities of energy companies but can be expensive as well as material and energy-intensive. The use of BEV is among the most interesting concepts on how to achieve it, but they are considered only when in the use phase as vehicle to grid (V2G) concept. Because reduced battery capacity decreases the interest of car manufacturers to reuse batteries and recycling is environmentally risky, these batteries should be used for storing, especially renewable electricity peaks. Extending the life cycle of batteries beyond the EV's life cycle is identified as a potential solution for both BEV EOL and energy system sustainability, enabling more efficient energy management performance. The idea itself along with forecasting its potential is the main novelty of this paper.

This paper discusses logistics service providers' (LSPs’) energy efficiency initiatives for sustainable development, both from an evolutionary perspective and based on a framework consisting of actions, processes (i.e. at the operations interface) and services (i.e. at the customer interface).

Following a qualitative research design, semi-structured interviews were conducted with sustainability managers at LSPs and the data were analysed via inductive coding. Based on the results and the literature, the authors developed a maturity model for LSPs' transitions to environmental sustainability.

LSPs' sustainable development occurs via operational processes, services at the customer interface, and actions that support those processes and services. Energy efficiency efforts are characterised by process depth that helps LSPs to align with their customers' energy efficiency improvement processes. While services related to energy efficiency connect LSPs and their customers, actions in support vary depending on the logistics activities in which LSPs participate.

Further research is needed to test and verify the maturity model and to clarify the interdependency of its three dimensions.

By categorising energy efficiency initiatives and proposing a maturity model for LSPs' sustainable development via energy efficiency, the authors have developed a tool for logistics actors to assess their progress towards improved sustainability.

The paper contributes to the literature by providing a three-pillar framework to understand the sustainability transitions of LSPs through energy efficiency. Developing a maturity model using this framework also contributes to the literature with an approach to assess sustainability advancement in the logistics industry.

This study aims to investigate the impact of the 2013 privatization of Nigeria’s energy sector on the technical performance of the Benin Electricity Distribution Company (BEDC) and its workforce.

This study used a questionnaire-based approach, and 196 participants were randomly selected. Analytical tools included standard deviation, Spearman rank correlation and regression analysis.

Before privatization, the energy sector, managed by the power holding company of Nigeria, suffered from inefficiencies in fault detection, response and billing. However, privatization improved resource utilization, replaced outdated transformers and increased operational efficiency. However, in spite of these improvements, BEDC faces challenges, including unstable voltage generation and inadequate staff welfare. This study also highlighted a lack of experience among the trained workforce in emerging electricity technologies such as the smart grid.

This study’s focus on BEDC may limit its generalizability to other energy companies. It does not delve into energy sector privatization’s broader economic and policy implications.

The positive outcomes of privatization, such as improved resource utilization and infrastructure investment, emphasize the potential benefits of private ownership and management. However, voltage generation stability and staff welfare challenges call for targeted interventions. Recommendations include investing in voltage generation enhancement, smart grid infrastructure and implementing measures to enhance employee well-being through benefit plans.

Energy sector enhancements hold positive social implications, uplifting living standards and bolstering electricity access for households and businesses.

This study contributes unique insights into privatization’s effects on BEDC, offering perspectives on preprivatization challenges and advancements. Practical recommendations aid BEDC and policymakers in boosting electricity distribution firms’ performance within the privatization context.

The current movement toward digitisation has promoted the adoption of smart building technology globally. Despite its advantages, its usage in developing countries such as Nigeria is still very low. Therefore, the purpose of this paper is to investigate construction professionals' awareness of smart building concepts (SBCs) in the Nigerian construction industry and identify the parameters by which SBCs can be measured.

A quantitative survey was carried out using a questionnaire to gather relevant data in the study area. This paper was conducted on 363 registered construction professionals in the Nigerian construction industry. The collected data were analysed using descriptive statistics and Kruskal–Wallis H test analysis.

This paper indicated that the majority of Nigerian construction professionals are aware of SBCs. Furthermore, the Kruskal–Wallis H test shows no significant difference between the awareness level of the various construction professionals. This paper further revealed energy management systems, IT network connectivity, safety and security management systems and building automation systems as the most significant parameters in which SBCs can be measured.

This paper identified significant parameters influencing SBCs awareness in the Nigerian construction industry. These parameters can be integrated into the building during the design stage and can be incorporated into the policymaking process of construction firms to promote the awareness of SBCs and encourage practices related to construction sustainability.

This paper provides empirical evidence on the awareness of SBCs among construction professionals and significant parameters influencing awareness in the Nigerian construction industry.