Search results

While most efforts to combat climate change are focussed on energy efficiency and substitution of fossil fuels, growth in the built environment remains largely unquestioned. Given the current climate emergency and increasing scarcity of global resources, it is imperative that we address this “blind spot” by finding ways to support required services with less resource consumption.

There is now long overdue recognition to greenhouse gas emissions “embodied” in the production of building materials and construction, and its importance in reaching targets of net zero carbon by 2050. However, there is a widespread belief that we can continue to “build big”, provided we incorporate energy saving measures and select “low carbon materials” – ignoring the fact that excessive volume and area of buildings may outweigh any carbon savings. This is especially the case with commercial real estate.

As the inception and planning phases of projects offer most potential for reduction in both operational and embodied carbon, we must turn our attention to previously overlooked options such as “build nothing” or “build less”. This involves challenging the root cause of the need, exploring alternative approaches to meet desired outcomes, and maximising the use of existing assets. If new build is required, this should be designed for adaptability, with increased stewardship, so the building stock of the future will be a more valuable and useable resource.

This points to the need for increased understanding and application of the principles of strategic asset management, hitherto largely ignored in sustainability circles, which emphasize a close alignment of assets with the services they support.

Arguably, as the built environment consumes more material resources and energy than any other sector, its future configuration may be critical to the future of people and the planet. In this regard, this paper seeks to break new ground for deeper exploration.

Climate change is occurring around us and impacting on our daily lives, meaning that we have to deal with our cities in a different way. There is also increasing awareness of the need for daily contact with green spaces and the natural environment in order to live a happy, productive and meaningful life.

This reflective essay tells the narrative of how urbanisation has been disconnecting humans from nature. Non-sustainable, non-resilient patterns of urbanisation, along with the neglect of inner-city areas, have resulted in fragmentation and urban decline, led to a loss of biodiversity, and caused the deterioration of ecosystems and their services. Urban regeneration projects allow us to “repair” and restore some of this damage whilst enhancing urban resilience. Connecting existing and enhanced ecosystems, and re-establishing ecosystems both within cities and at the peri-urban fringe is vital for strengthening ecosystem resilience and building adaptive capacity for coping with the effects of climate change.

Cities worldwide need to look for suitable solutions to increase the resilience of their urban spaces in the face of climate change. This essay explores how this can be achieved through the integration of nature-based solutions, the re-greening of neighbourhoods and by correctly attributing value to natural capital. Transforming existing cities and neighbourhoods in this way will enable ecosystems to contribute their services towards healthier and more liveable cities.

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The construction of a modern economic system is a symbolic and strategic choice for large developing economies on the path toward high-quality economic development. The paper aims to discuss this issue.

The overall framework aims to adhere to “One Policy and One Mainline” to build an innovation-driven, synergistic industrial system and a “with three-qualities” economic system (with efficient market mechanisms, energetic micro-agents and appropriate macroeconomic regulation).

The strengthening of the real economy and construction of a modern industrial system constitute the material basis for supporting this system and framework. As major decision making and theoretical innovation in empirical practice, building a modern economic system can also contribute substantially toward developing the applied economic theory of socialism with Chinese characteristics.

Building a modern economic system in China necessitates, without exception, the construction of various subsystems encompassing industrial, market, distribution, regional development, green development, open and economic institutional aspects.

This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lubricant, on the thermal and rheological properties of PLA/MWCNTs (polylactic acid/multi-walled carbon nanotubes) and PLA/HNT (halloysite nanotubes) nanocomposites, as a reference for application in 3D printing processes.

Nanocomposites were obtained by melting in a twin-screw extruder, mixing PLA with MWCNTs and HNTs in different percentages of 0.5, 0.75 and 1 Wt.% for subsequent mixing by the same process with 5 phr MLO, for application in additive manufacturing, as analyzed by means of differential scanning calorimetry (DSC), capillary rheometry, melt flow rate (MFL) and field emission scanning electron microscopy (FESEM).

The results obtained for thermal characterization by using DSC indicate the non-variation of glass transition temperature Tg = 62 ± 2°C and a melting temperature (Tm) around 170°C. Crystallization temperature dropped by approximately 12°C, which should be kept in mind during the transformation processes. The values obtained by capillary rheometry indicate that the material’s viscosity is reduced by the influence of the MLO plasticizer’s lubricant effect on the PLA’s molecular structure. The melt flow index values confirm a rise of approximately 46% in the flow index and back up the capillary rheometry results. The values obtained were as follows: PLA/0.5 Wt.% MWCNT/MLO 5 phr 54.07, PLA/0.75 Wt.% MWCNT/MLO 5 phr 53.46, PLA/1 Wt.% MWCNT/MLO 5 phr 51.84y PLA/0.5 Wt.% HNT/MLO 5 phr 61.8, PLA/0.75 Wt.% HNT/MLO 5 phr 68.3 and PLA/1 Wt.% HNT/MLO 5 phr 71.2 g/10 min. Apart from the nanocharge distribution, the information obtained from the FESEM shows the existence of a cluster, which could have been avoided by more energetic stirring during the nanocompound manufacturing process.

This paper presents an analysis of the insertion of plasticizer in nanocomposites for the application in additive manufacturing processes in fusion deposition modelling (FDM) system.

This is a novel original research work.

The purpose of this paper is to propose a framework of green strategies as a combination of energy-efficiency measures and solutions towards environmental impact reduction for improving environmental sustainability at logistics sites. Such measures are examined by discussing the related impacts, motivations and barriers that could influence the measures' adoption. Starting from the framework, directions for future research in this field are outlined.

The proposed framework was developed starting from a systematic literature review (SLR) approach on 60 papers published from 2008 to 2022 in international peer-reviewed journals or conference proceedings.

The framework identifies six main areas of intervention (“green strategies”) towards green warehousing, namely Building, Utilities, Lighting, Material Handling and Automation, Materials and Operational Practices. For each strategy, specific energy-efficiency measures and solutions towards environmental impact reduction are further pinpointed. In most cases, “green-gold” measures emerge as the most appealing, entailing environmental and economic benefits at the same time. Finally, for each measure the relationship with the measures' primary impacts is discussed.

From an academic viewpoint, the framework fills a major gap in the scientific literature since, for the first time, this study elaborates the concept of green warehousing as a result of energy-efficiency measures and solutions towards environmental impact reduction. A classification of the main areas of intervention (“green strategies”) is proposed by adopting a holistic approach. From a managerial perspective, the paper addresses a compelling need of practitioners – e.g. logistics service providers (LSPs), manufacturers and retailers – for practices and solutions towards greener warehousing processes to increase energy efficiency and decrease the environmental impact of the practitioners' logistics facilities. In this sense, the proposed framework can provide valuable support for logistics managers that are about to approach the challenge of turning the managers' warehouses into greener nodes of the managers' supply chains.

This paper aims to present the basic assumptions for creation of social Fröhlich condensate and attract attention of other researchers (both from physics and socio-political science) to the problem of modeling of stability and order preservation in highly energetic society coupled with social energy bath of high temperature.

The model of social Fröhlich condensation and its analysis are based on the mathematical formalism of quantum thermodynamics and field theory (applied outside of physics).

The presented quantum-like model provides the consistent operational model of such complex socio-political phenomenon as Fröhlich condensation.

The model of social Fröhlich condensation is heavily based on theory of open quantum systems. Its consistent elaboration needs additional efforts.

Evidence of such phenomenon as social Fröhlich condensation is demonstrated by stability of modern informationally open societies.

Approaching the state of Fröhlich condensation is the powerful source of social stability. Understanding its informational structure and origin may help to stabilize the modern society.

Application of the quantum-like model of Fröhlich condensation in social and political sciences is really the novel and original approach to mathematical modeling of social stability in society exposed to powerful information radiation from mass-media and Internet-based sources.

This paper aims to describe the control software of a novel manufacturing system called plasma-assisted bio-extrusion system (PABS), designed to produce complex multi-material and functionally graded scaffolds for tissue engineering applications. This fabrication system combines multiple pressure-assisted and screw-assisted printing heads and plasma jets. Control software allows the users to create single or multi-material constructs with uniform pore size or pore size gradients by changing the operation parameters, such as geometric parameters, lay-down pattern, filament distance, feed rate and layer thickness, and to produce functional graded scaffolds with different layer-by-layer coating/surface modification strategies by using the plasma modification system.

MATLAB GUI is used to develop the software, including the design of the user interface and the implementation of all mathematical programing for both multi-extrusion and plasma modification systems.

Based on the user definition, G programing codes are generated, enabling full integration and synchronization with the hardware of PABS. Single, multi-material and functionally graded scaffolds can be obtained by manipulating different materials, scaffold designs and processing parameters. The software is easy to use, allowing the efficient control of the PABS even for the fabrication of complex scaffolds.

This paper introduces a novel additive manufacturing system for tissue engineering applications describing in detail the software developed to control the system. This new fabrication system represents a step forward regarding the current state-of-the-art technology in the field of biomanufacturing, enabling the design and fabrication of more effective scaffolds matching the mechanical and surface characteristics of the surrounding tissue and enabling the incorporation of high number of cells uniformly distributed and the introduction of multiple cell types with positional specificity.

This research is a critical discourse analysis (CDA) of Trump's speech on January 6, 2021, which results in his supporters' storming the US Capitol in order to challenge certifying Biden's victory. The Democrats accused Trump of incitement of insurrection. Consequently, Trump was impeached. This article investigates Trump's speech to label it as hate speech or free speech.

Analytical framework is tri-dimensional. The textual analysis is based on Halliday's notion of process types and Huckin's discourse tools of foregrounding and topicalization. The socio-cognitive analysis is based on Van Dijk's ideological square and his theory of mental models. The philosophical dimension is founded on Habermas's theory of discourse. These parameters are the cornerstones of the barometer that will be utilized to reach an objective evaluation of Trump's speech.

Findings suggest that Trump usually endows “I, We, You” with topic positions to lay importance on himself and his supporters. He frequently uses material process to urge the crowds' action. He categorizes Americans into two conflicting poles: He and his supporters versus the media and the Democrats. Mental models are created and activated so that the other is always negatively depicted. Reports about corruption are denied in court. Despite that, Trump repeats such reports. This is immoral in Habermas's terms. The study concludes that Trump delivered hate speech in order to incite the mob to act in a manner that may change the election results.

The study is original in its tri-dimensional framework and its data of analysis.

The purpose of this paper is to investigate an unexplored part of advertising history; namely, the education of a large, mundane, nonelite group of advertising professionals, so-called advertising technicians and the knowledge they acquired. Examining correspondence courses in the technology of advertising, we focus particularly on the production of technified knowledge and mass personas.

The study is based on a qualitative analysis of course material from Sweden’s two largest correspondence schools in the 1930s and 1940s. Two theoretical concepts guide the analysis: the concept of market devices and the notion of personas, both of which we use to show how the courses crafted a particular kind of advertising professional as well as knowledge.

The study shows that courses created a template-based persona of the advertising technician, who possessed what we call bounded originality characterized by diligence, modesty and rule-governed creative imagination. Similarly, the courses created a body of knowledge that was controllable and highly practice-oriented. The advertising technician was expected to embody and internalize the advertising knowledge, thus, becoming an extension of this knowledge on the market.

By directing the searchlight at the cadre of ordinary, middle-class advertising professionals instead of the high-profile “advertising creatives” and innovators, the paper brings to the foreground the nonelite level of the advertising industry. These practitioners went to work in the business world to produce the everyday advertising that was not necessarily groundbreaking but was needed in a growing mass-consumption society.