Search results

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

The purpose of this paper is to develop a blockchain-based data capture and transmission system that will collect real-time power consumption data from a household electrical appliance and transfer it securely to a local server for energy analytics such as forecasting.

The data capture system is composed of two current transformer (CT) sensors connected to two different electrical appliances. The CT sensors send the power readings to two Arduino microcontrollers which in turn connect to a Raspberry-Pi for aggregating the data. Blockchain is then enabled onto the Raspberry-Pi through a Java API so that the data are transmitted securely to a server. The server provides real-time visualization of the data as well as prediction using the multi-layer perceptron (MLP) and long short term memory (LSTM) algorithms.

The results for the blockchain analysis demonstrate that when the data readings are transmitted in smaller blocks, the security is much greater as compared with blocks of larger size. To assess the accuracy of the prediction algorithms data were collected for a 20 min interval to train the model and the algorithms were evaluated using the sliding window approach. The mean average percentage error (MAPE) was used to assess the accuracy of the algorithms and a MAPE of 1.62% and 1.99% was obtained for the LSTM and MLP algorithms, respectively.

A detailed performance analysis of the blockchain-based transmission model using time complexity, throughput and latency as well as energy forecasting has been performed.

The present study investigated organizational resilience (OR) in the United Arab Emirates (UAE’s) energy sector to identify impactful technological and human variables and assess the hermeneutic effect of digital transformation on value co-creation and OR. The study also investigates the mediating role of value co-creation on a few covariates of OR.

The questionnaire was sent out to 311 professionals in the energy sector, all affiliated with governmental organizations, using quota sampling. A total of 206 collated responses corresponding to the tested variables regarding the influences of digital transformation, employee resilience, innovation readiness, cyber resilience and value co-creation on OR were analyzed using structural equation modeling. Accordingly, a model of eight constructs and their 27 indicators was tested.

Instituting flexibility and adaptability to technological advancements, as well as cyber resilience, was found to enhance digital transformation. The sense of self-efficacy of the professionals who participated in the study led them to develop innovation readiness and thus embrace creativity and encourage co-creation while maintaining collaborative efforts with customers and stakeholders. This mediated several technological and human variables, such as the importance of managers' understanding of customer needs, preferences and pain points, which involves actively seeking and valuing customer feedback to inform decision-making.

When iterative prototyping, continuous learning, and OR are integrated into an organization’s culture, they create a robust foundation for a customer-centric mindset. This mindset becomes ingrained in how employees approach their work and make purposeful decisions.

The present study drew empirical insights into OR in the UAE’s energy sector from a resource-based theory perspective. By identifying potential vulnerabilities and implementing appropriate mitigation measures, organizations can reduce the likelihood and impact of disruptions, which can ultimately help them maintain customer satisfaction and loyalty.

A major obstacle regarding the measurement of an organization's sustainability and accountability in the space economy is defining the context and boundaries of commercial activity in outer space. Here, we introduce an ecosystem framework to address this obstacle. We utilize this framework to analyze the space mining sector. Our ecosystem framework sets the space mining sector's boundaries and helps a firm identify key stakeholders, activities, policies, norms and common pool resources in that sector and the interactions between them; a significant step in structuring how to measure space sustainability and accountability.

Borrowing theories and perspectives from a wide range of academic fields, this paper conducts a comprehensive context analysis of the space mining ecosystem.

Using our ecosystem framework to define the context and set boundaries for the space mining sector allowed us to identify sustainability-related issues in the sector and offer roadmaps to develop sustainability measures and standards.

To the best of the authors’ knowledge, this is one of the first papers to introduce a framework to define boundaries in the global space economy and provides a tool to understand, measure and evaluate the space mining sector's environmental, social and economic issues.

The purpose of this paper is to explore the current practices in security convergence among and between corporate security and cybersecurity processes in commercial enterprises.

This paper is the first phase in a planned multiphase project to better understand current practices in security optimization efforts being implemented by commercial organizations exploring means and methods to operate securely while reducing operating costs. The research questions being examined are: What are the general levels of interest in cybersecurity and corporate security convergence? How well do the perspectives on convergence align between organizations? To what extent are organizations pursuing convergence? and How are organizations achieving the anticipated outcomes from convergence?

In organizations, the evolution to a more optimized security structure, either merged or partnered, was traditionally due to unplanned or unforeseen events; e.g. a spin-off/acquisition, new security leadership or a negative security incident was the initiator. This is in contrast to a proactive management decision or formal plan to change or enhance the security structure for reasons that include reducing costs of operations and/or improving outcomes to reduce operational risks. The dominant exception was in response to regulatory requirements. Preliminary findings suggest that outcomes from converged organizations are not necessarily more optimized in situations that are organizationally merged under a single leader. Optimization may ultimately depend on the strength of relationships and openness to collaboration between management, cybersecurity and corporate security personnel.

This report and the number of respondents to its survey do not support generalizable findings. There are too few in each category to make reliable predictions and in analysis, there was an insufficient quantity of responses in most categories to allow supportable conclusions to be drawn.

Practitioners may find useful contextual clues to their needs for convergence or in response to directives for convergence from this report on what is found in some other organizations.

Improved effectiveness and/or reduced costs for organizational cybersecurity would be a useful social outcome as organizations become more efficient in the face of increasing levels of cyber security threats.

Convergence as a concept has been around for some time now in both the practice and research communities. It was initially promoted formally by ASIS International and ISACA in 2005. Yet there is no universally agreed-upon definition for the term or the practices undertaken to achieve it. In addition, the business drivers and practices undertaken to achieve it are still not fully understood. If convergence or optimization of converged operations offers a superior operational construct compared to other structures, it is incumbent to discover if there are measurable benefits. This research hopes to define the concept of security collaboration optimization more fully. The eventual goal is to develop and promote a tool useful for organizations to measure where they are on such a continuum.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This paper aims to present a novel lightweight distribution grid operating robot system with focus on lightweight and multi-functionality, aiming for autonomous and live-line maintenance operations.

A ground-up redesign of the dual-arm robotic system with 12-DoF is applied for substantial weight reduction; a dual-mode operating control framework is proposed, with vision-guided autonomous operation embedded with real-time manual teleoperation controlling both manipulators simultaneously; a quick-swap tooling system is developed to conduct multi-functional operation tasks. A prototype robotic system is constructed and validated in a series of operational experiments in an emulated environment both indoors and outdoors.

The overall weight of the system is successfully brought down to under 150 kg, making it suitable for the majority of vehicle-mounted aerial work platforms, and it can be flexibly and quickly deployed in population dense areas with narrow streets. The system equips with two dexterous robotic manipulators and up to six interchangeable tools, and a vision system for AI-based autonomous operations. A quick-change tooling system ensures the robot to change tools on-the-go without human intervention.

The resulting dual-arm robotic live-line operation system robotic system could be compact and lightweight enough to be deployed on a wide range of available aerial working platforms with high mobility and efficiency. The robot could both conduct routine operation tasks fully autonomously without human direct operation and be manually operated when required. The quick-swap tooling system enables lightweight and durable interchangeability of multiple end-effector tools, enabling future expansion of operating capabilities across different tasks and operating scenarios.

The purpose of this study is to provide the enhancement of power quality of a high power-rated voltage source inverter driven induction motor with a three-phase, three-level neutral point clamped converter placed at the front end, while a passive power filter is connected in shunt with it. The improvement in power quality can be achieved by reducing the total harmonic distortion in source current. The controllers were designed for the linearization of the high-power induction motor drive. A control method is presented for the regulation of the common DC-link voltage.

The induction motor is modeled using its dynamic equations, and a decoupling controller is designed to linearize the nonlinear dynamics of the drive through feedback. The common DC-link voltage of the proposed front-end connected converter is monitored and controlled through a control method which feeds the pulse width modulated inverter that drives the induction motor. A passive power filter is designed to meet the reactive power requirement of the system in addition to improve the power quality.

Simulations were carried out for the proposed topology of the drive mechanism, and the outcomes were analyzed by a comparative analysis of the drive system both in the presence of the passive filter as well as in the absence of the filter. The total harmonic distortion is found to be reduced enough to meet the standards with the designed filter, and the reactive power is also compensated considerably. The input power factor at the supply side is maintained almost to unity, and the DC-link voltage of the proposed circuit topology is maintained at the desired level. The overall performance of the drive system was found to be useful and economical.

A new topology of a front-end connected three-level neutral point clamped converter to a high power-rated induction motor drive is proposed. The drive is fed by a pulse width modulated inverter with a common DC-link with the front end connected converter. A passive filter is designed with respect to the reactive power requirement of the system and connected in shunt to the converter at the supply side. Control schemes are designed and used for the drive system and also for the regulation of the common DC-link voltage of the proposed front end connected converter.

The purpose of this paper is to introduce a double-stator switched reluctance machine (DS-SRM) for electric vehicles (EVs) and to propose multi-mode operations for this machine.

Analysis of flux linkage distributions and torque characteristics using finite element method (FEM). Building a dynamic simulation model based on electromagnetic characteristics, mathematical equations and mechanical motion equations of the DS-SRM drive system. The paper proposes multi-mode operations (inner-stator excitation mode, outer-stator excitation mode and double-stator excitation mode) based on motor working regions. It also conducts simulation and experimental results to verify the effectiveness of the proposed multi-mode operations strategies and control schemes.

There is almost no electromagnetic coupling between the inner and outer stators due to the specially designed rotor structure and optimized windings polarity configuration. Analysis of flux linkage distributions and torque characteristics verified the independence of inner and outer stators. Proposal of multi-mode operations and corresponding control rules achieved the smooth switching between different modes.

The paper introduced the DS-SRM for EVs and proposed multi-mode operations, along with control rules, to optimize its performance. The specially designed rotor structure, optimized winding polarity configuration, and the proposed multi-mode operations contribute to the originality of the research.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.