Search results

Disaster management and humanitarian logistics (HT) play crucial roles in large-scale events such as earthquakes, floods, hurricanes and tsunamis. Well-organized disaster response is crucial for effectively managing medical centres, staff allocation and casualty distribution during emergencies. To address this issue, this study aims to introduce a multi-objective stochastic programming model to enhance disaster preparedness and response, focusing on the critical first 72 h after earthquakes. The purpose is to optimize the allocation of resources, temporary medical centres and medical staff to save lives effectively.

This study uses stochastic programming-based dynamic modelling and a discrete-time Markov Chain to address uncertainty. The model considers potential road and hospital damage and distance limits and introduces an a-reliability level for untreated casualties. It divides the initial 72 h into four periods to capture earthquake dynamics.

Using a real case study in Istanbul’s Kartal district, the model’s effectiveness is demonstrated for earthquake scenarios. Key insights include optimal medical centre locations, required capacities, necessary medical staff and casualty allocation strategies, all vital for efficient disaster response within the critical first 72 h.

This study innovates by integrating stochastic programming and dynamic modelling to tackle post-disaster medical response. The use of a Markov Chain for uncertain health conditions and focus on the immediate aftermath of earthquakes offer practical value. By optimizing resource allocation amid uncertainties, the study contributes significantly to disaster management and HT research.

The brake controller is a key component of the locomotive brake system. It is essential to study its safety.

This paper summarizes and analyzes typical faults of the brake controller, and proposes four categories of faults: position sensor faults, microswitch faults, mechanical faults and communication faults. Suggestions and methods for improving the safety of the brake controller are also presented.

In this paper, a self-judgment and self-learning dynamic calibration method is proposed, which integrates the linear error of the sensor and the manufacturing and assembly errors of the brake controller to solve the output drift. This paper also proposes a logic for diagnosing and handling microswitch faults. Suggestions are proposed for other faults of brake controller.

The methods proposed in this paper can greatly improve the usability of the brake controller and reduce the failure rate.

This paper argues for the need to use multiple sources and methods that respond to research challenges presented by new forms of war. There are methodological constraints and contention on the superiority given to positivist and interpretivist research designs when doing fieldwork in war situations, hence there is a need to use integrated data generation techniques. The combined effect of severe limitations of movement for both the researcher and researched fragmented data because of polarized views about the causes of the war and unpredictable events that make information hard to come by militate against systematic, organised and robust data generation. The purpose of this paper, therefore, is to make fieldwork researchers understand significant research problems unique to war zones.

This research was guided by the postmodernist mode of thought which challenges standardised research traditions. Fieldwork experiences in Cabo suggest the need to use the composite strategies that rely on the theoretical foundation of integrative and creative collection of data when doing research in violent settings.

The fieldwork experiences showed that the standardised, conventional and valorised positivist and ethnographic research strategies may not sufficiently facilitate understanding of the dynamics of war. There should not be firm rules, guidelines or regulations governing the actions of the researcher in conflict. As such, doing research in violent settings require reflexivity, flexibility and creativity in research strategies that respond to rapid changes. Research experiences in Mozambique show the need to use blended methods that include even less structured methodologies.

Fieldwork experiences in Cabo challenges researchers who cling to standardised research traditions which often hamper awareness of new postmodernist mode of thought applicable to war settings. It is essential to study the nature of African armed conflicts by combining creativity and flexibility in the selection of research strategies.

The principal aim of this paper is to review three basic theoretical growth models, namely the Harrod-Domar model, the Solow model and the Ramsey model, and examine their implications for economic policies.

The paper utilizes a positivist research framework that emphasizes the causal relationships between the variables in each of the three models. Mathematical methods are employed to formulate and examine the three models under study. Since the paper is theoretical, it does not use any empirical data although numerical illustrations are provided whenever they are appropriate.

The Harrod-Domar model explains why countries with high rates of saving may also enjoy high rate of economic growth. Both the Solow and Ramsey models can be used to explain the medium-income trap. The paper examines the impact of Covid shocks on the macroeconomy. While the growth rate can be recovered, it may not always possible to recover the output level.

For the Harrod-Domar model, the public spending decreases the private consumption at the period 1, but there is no change in the capital stock and hence the production in subsequent periods. For the Ramsey model with AK production function, both the private consumption and the outputs will be lowered. In both the Harrod-Domar and Ramsey models with Cobb-Douglas production function, if the debt is not high and the interest rate is sufficiently low, it is better to use public debt for production rather than for consumption. If the country borrows to recover the Total Factor Productivity after the Covid pandemic, both the Harrod-Domar and Ramsey models with Cobb-Douglas production function show that the rate of growth is higher for the year just after the pandemic but is the same as before the pandemic.

The economy can recover the growth rate after a Covid shock, but the recovery process will generally take many periods.

This paper focuses on economic implications and does not aim to examine social implications of policy changes or Covid-type shock.

The paper provides a comparison of three basic growth models with respect to public spending, public debts and repayments and Covid-type shocks.

Literature reveals ongoing debates around the role of business analysts in agile software development (ASD) teams. This can be attributed, in part, to a knowledge gap concerning how business analysts contribute to overall team capabilities, particularly those which are essential in enabling teams to respond to fast-paced environmental changes. The purpose of this study was to address this gap by investigating how business analysts (BAs) contribute to the dynamic capabilities of ASD teams.

Through a deductive approach, this study adapted and applied a research model based on the team dynamic capabilities (DC) theory to explore the contributions of BAs in agile teams. The study was executed using a qualitative, single case study research strategy directed at an ASD team in the financial services industry. Moreover, data were collected through face-to-face, semi-structured interviews; a focus group; non-participant observation and physical artefacts review. The thematic analysis technique was used to analyse the data.

The study contributes to teams DC theory through four theoretical propositions centred on the role of BAs. The proposition highlights how BAs relationship management, tacit knowledge sharing, task mental models and transactive memory are key contributors of ASD teams' DC. The study also found that BAs contribute to ASD teams' ability to embrace agile principles 2, 4, 6 and 12. This study can inform the design of capacity development programmes for individual team members and BAs and thus help managers curate teams that will best promote DC.

This study can inform the design of capacity development programmes for individual team members and BAs and thus help managers curate teams that will best promote DC.

This study builds on the relatively few studies which focus on DC within software development (SD) teams and ASD project teams. Moreover, the study explores how an individual (i.e. a BA) can contribute to the DC of a team.

The current study evaluated (1) characteristics of the community leadership development program associated with successful participant recruitment, (2) active ingredients that promoted fellow engagement and program completion and (3) how the program addressed blackness and racism.

Individual interviews were conducted with a representative subset of former program fellows.

Results indicated that offering training in small cohorts and matching fellows with individual mentors promoted program interest. Program strengths and unique ingredients included that the program was primarily led by people from the Black community, program malleability, and that the program was a partnership between fellows and leadership. Additionally, the program was responsive to fellows’ needs such as by adding a self-care component. Fellows also noted dedicated space and time to discuss race and racism. Results offer a unique theoretical perspective to guide leadership development away from the uniform or standardized approach and toward one that fosters diversity and equity in leadership.

Altogether, this work demonstrates how leadership development programs can be participant-informed and adapted to participants’ social and cultural needs.

This study aims to investigate the feasibility of employing a multi-objectives integer-programming model for effective allocation of resources for cyberfraud mitigation. The formulated objectives are the minimisation of the total allocation cost of the anti-fraud capacities and the maximisation of the forensic accounting capacities in all cyberfraud incident prone spots.

From the literature survey conducted and primary qualitative data gathered from the 17 licenced banks in South Africa on fraud investigators, the suggested fraud investigators are the organisation’s finance department, the internal audit committee, the external risk manager, accountants and forensic accountants. These five human resource capacities were considered for the formulation of the multi-objectives integer programming (MOIP) model. The MOIP model is employed for the optimisation of the employed capacities for cyberfraud mitigation to ensure the effective allocation and utilisation of human resources. Thus, the MOIP model is validated by a genetic algorithm (GA) solver to obtain the Pareto-optimum solution without the violation of the identified constraints.

The formulated objective functions are optimised simultaneously. The Pareto front for the two objectives of the MOIP model comprises the set of optimal solutions, which are not dominated by any other feasible solution. These are the feasible choices, which indicate the suitability of the MOIP to achieve the set objectives.

The results obtained indicate the feasibility of simultaneously achieving the minimisation of the total allocation cost of the anti-fraud capacities, or the maximisation of the forensic accounting capacities in all cyberfraud incident prone spots – or the trade-off between them, if they cannot be reached simultaneously. This study recommends the use of an iterative MOIP framework for decision-makers which may aid decision-making with respect to the allocation and utilisation of human resources.

The originality of this work lies in the development of multi-objectives integer-programming model for effective allocation of resources for cyberfraud mitigation.

Knowing the students' readiness for the fourth industrial revolution (4IR) is essential to producing competent, knowledgeable and skilled graduates who can contribute to the skilled workforce in the country. This will assist the Higher Education Institutions (HEIs) to ensure that their graduates own skill sets needed to work in the 4IR era. However, studies on students' readiness and preparedness for the 4IR in developing countries such as the Sultanate of Oman are still lacking. Therefore, this study investigates students' readiness level and preparedness for the 4IR. The findings of this study will benefit the HEIs policymakers, administration, faculties, departments, industries and society at large since they will be informed of the student's readiness and preparedness toward industry 4.0.

The authors adopted the measures from the same context as previous studies in this study. The questionnaire was divided into three sections; the first part described the purpose and introduction of the search with the surety to keep the data confidential. The second part consisted of demographical information like gender, education. The last parts consisted of four subsections, question items in these parts are based on the related previous study. Characteristics consisted of 14 items, knowledge consisted of 18 items related to 4IR technologies, Organizational Dimension comprised of four items related to academic programs, curriculum and training. Preparedness contained two items. The participants have rated all the items in 5-Likert scale.

Results from structural equation modeling showed that students' characteristics, knowledge of 4IR technologies and organizational dimensions significantly impact their preparedness for the 4IR. The study also found that organizational dimensions have the highest impact on students' preparedness. Furthermore, the organizational dimension significantly influences students' knowledge of 4IR technology. Moreover, students' characteristics related to 4IR are significantly affected by their knowledge of 4IR technology and organizational dimension. The findings suggest that HEIs are responsible for increasing the adoption of 4IR, and therefore organizational dimensions such as the academic programs, training, technological infrastructure and others are all critical for preparing students for a better future and should be given a priority.

This study has used academic programs and training to measure the organizational dimension. However, other important factors should be considered, such as technological infrastructure and leadership and governance of HEIs. Second, the current research depends on quantitative data, so future research should implement a mixed methodology (questionnaires, depth interviews, document analysis and focus group) to understand the factors affecting students' readiness for 4IR clearly. Finally, although the 4IR has numerous benefits, it also has challenges in its implementation, so future studies should focus on challenges encountered by different stakeholders in implementing 4IR-related technologies.

The curriculum must include mandatory courses related to IT infrastructure design, user experience programming, electronic measurement and control principles, and programming for data science. HEIs should also foster interdisciplinary knowledge by integrating IT, Engineering, Business and Sciences. Furthermore, the HEIs should develop their infrastructure to have smart campuses, labs, classrooms and libraries to make HEIs a space where knowledge can be generated and innovative solutions can be proposed. This entails HEIs offering necessary hardware, software and technical support because if the HEIs improve their technological resources, students will be capable of using 4IR-related technologies effectively.

The advancement of technology has resulted in the emergence of the Fourth Industrial Revolution (4IR), such as artificial intelligence, blockchain, robotics, cloud computing, data science, virtual reality and 3D printing. It is essential to investigate students' readiness for 4IR. However, there is no study as per researchers' knowledge talked about students readiness in HEIs in the Arab world. This study could be a basis for more research on students' perception of the 4IR covering students from various backgrounds and levels.

The purpose of this study is to focus on structured data provision and asset information model maintenance and develop a data provenance model on a blockchain-based digital twin smart and sustainable built environment (DT) for predictive asset management (PAM) in building facilities.

Qualitative research data were collected through a comprehensive scoping review of secondary sources. Additionally, primary data were gathered through interviews with industry specialists. The analysis of the data served as the basis for developing blockchain-based DT data provenance models and scenarios. A case study involving a conference room in an office building in Stockholm was conducted to assess the proposed data provenance model. The implementation utilized the Remix Ethereum platform and Sepolia testnet.

Based on the analysis of results, a data provenance model on blockchain-based DT which ensures the reliability and trustworthiness of data used in PAM processes was developed. This was achieved by providing a transparent and immutable record of data origin, ownership and lineage.

The proposed model enables decentralized applications (DApps) to publish real-time data obtained from dynamic operations and maintenance processes, enhancing the reliability and effectiveness of data for PAM.

The research presents a data provenance model on a blockchain-based DT, specifically tailored to PAM in building facilities. The proposed model enhances decision-making processes related to PAM by ensuring data reliability and trustworthiness and providing valuable insights for specialists and stakeholders interested in the application of blockchain technology in asset management and data provenance.

This paper aims to classify journal papers in the context of hybrid quality function deployment QFD and multi-criteria decision-making (MCDM) methods published during 2004–2021.

A conceptual classification scheme is presented to analyze the hybrid QFD-MCDM methods. Then some recommendations are given to introduce directions for future research.

The results show that among all related areas, the manufacturing application has the most frequency of published papers regarding hybrid QFD-MCDM methods. Moreover, using uncertainty to establish a hybrid QFD-MCDM the relevant papers have been considered during the time interval 2004–2021.

There are various shortcomings in conventional QFD which limit its efficiency and potential applications. Since 2004, when MCDM methods were frequently adopted in the quality management context, increasing attention has been drawn from both practical and academic perspectives. Recently, the integration of MCDM techniques into the QFD model has played an important role in designing new products and services, supplier selection, green manufacturing systems and sustainability topics. Hence, this survey reviewed hybrid QFD-MCDM methods during 2004–2021.